Sage Journals: Discover world-class research

Abstract

Liquid composite molding (LCM) processes offer composite makers the environmental benefits realized by the closed molding process, and can provide better dimensional tolerances as well as part complexity. One drawback is the unpredictability in the flow behavior during the filling stage due to material and process variability that can result in resin void areas, or dry spots. Parts containing dry spots must be discarded, thus adding superfluous cost to the process. Flow control has demonstrated the ability to correct those flow anomalies to eliminate dry spots. Previous efforts developed a hybrid on-line–off-line flow controller for the LCM process and detailed the development and application of the methodology. In this study, the methodology is summarized, and the technique is applied in a manufacturing environment. A resin transfer molding workstation is developed and built to meet the needs of the control technique. A series of experiments with three different geometries with increasing complexity is conducted to validate the new flow control methodology. The results are compared with experiments without flow control to gauge the usefulness of the methodology proposed.

Keywords

resin transfer molding mold design active control preform variability

Get full access to this article

View all access options for this article.

References

Hsiao, K.-T. and Advani, S.G. (2004). Flow Sensing and Control Strategies to Address Race-tracking Disturbances in Resin Transfer Molding – Part I: Design and Algorithm Development , Composites Part A: Applied Science and Manufacturing, 35(10): 1149–1159 .

Devillard, M. , Hsiao, K.-T. and Advani, S.G. (2005). Flow Sensing and Control Strategies to Address Race-tracking Disturbances in Resin Transfer Molding – Part II: Automation and Validation , Composites Part A: Applied Science and Manufacturing, 36(11): 1581–1589 .

Lawrence, J.M. , Friede, P. and Advani, S.G. (2004). Automated Manufacturing Environment to Address Bulk Permeability Variations and Race Tracking in Resin Transfer Molding by Redirecting Flow with Auxiliary Gates , Composites Part A: Applied Science and Manufacturing, 36(8): 1128–1141 .

Nielsen, D. and Pitchumani, R. (2001). Intelligent Model-based Control of Preform Permeation in Liquid Composite Molding Processes, with Online Optimization , Composites A: Applied Science and Manufacturing, 32(12): 1789–1803 .

Lawrence, J.M. and Advani, S.G. (2005). Dependence Map based Flow Control to Reduce Void Content in Liquid Composite Molding , Materials and Manufacturing Processes, 20(6): 933–960 .

Gokce, A. and Advani, S.G. (2003). Gate Effectiveness in Controlling Resin Advance in Liquid Composite Molding Processes , Journal of Manufacturing Science and Engineering, 125(3): 548–555 .

Al-Hasan, S. and Vachtsevanos, G. (2002). Intelligent Rout Planning for Fast Autonomous Vehicles Operating in a Large Terrain , Robotics and Autonomous Systems, 40(1): 1–24 .

Sharai, Y. and Tsuji, J.-I. (1982). Artificial Intelligence: Concepts, Techniques and Applications, John Wiley & Sons, New York .

Heyes-Jones, J. (1994). http://www.geocities.com/jheyesjones/astar.html.

10.

Simacek, P. and Advani, S.G. (2004). Desirable Features in a Mold Filling Simulation for Liquid Molding Process , Polymer Composites, 25(4): 355–367 .

11.

Bruschke, M. and Advani, S.G. (1990). Finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media , Polymer Composites, 11(6): 398–405 .

12.

Lawrence, J.M. , Devillard, M. and Advani, S.G. (2004). Design and Testing of a New Injection Approach for Liquid Composite Molding , Journal of Reinforced Plastics and Composites, 23(15): 1625–1638 .

13.

Devillard, M. , Hsiao, K.-T. , Gokce, A. and Advani, S.G. (2003). On-line Characterization of Bulk Permeability and Race-tracking during the Filling Stage in Resin Transfer Molding Process , Journal of Composite Materials, 37: 1525–1541 .

14.

Kueh, S.R.M. , Advani, S.G. and Parnas, R.S. (2000). Sensor Placement Study for Online Flow Monitoring in Liquid Composite Molding , Polymer Composites, 21(3): 436–449 .

15.

Schwab, S.D. , Levy, R.L. and Glover, G.G. (1996). Sensor System for Monitoring Impregnation and Cure during Resin Transfer Molding , Polymer Composites, 17(2): 312–316 .

16.

Rice, B.P. , Han, K. and Lee, W.C. (1999). Intelligent Process Control for the Resin Infusion Process , In: Proceedings of On-line Sensing and Control for Liquid Molding of Composite Structures, Annapolis, Maryland.

17.

Bradley, J.E. , Diaz-Perez, J. , Gillespie, Jr., B.K. and Fink, B.K. (1998). On-line Process Monitoring and Analysis of Thick-section Composite Parts Utilizing SMARTweave in situ Sensing Technology , In: Proceedings of International SAMPE Symposium and Exhibition, Anaheim, CA, USA: SAMPE, Covina, CA, USA.

18.

Higuerey, E.E. and Coulter, J.P. (1996). Real-time Embedded Electronic Sensing during Resin Transfer Molding , Journal of Materials Processing and Manufacturing Science, 4(3): 179–203 .

19.

Dunkers, J.P. , Flynn, K.M. and Parnas, R.S. (1997). A Mid-infrared Attenuated Total Internal Reflection Cure Sensor for Control of Resin Transfer Moulding of a Pre-ceramic Polymer , Composites Part A: Applied Science and Manufacturing, 28(2): 163–170 .

20.

Dunkers, J.P. , Lenhart, J.L. , Kueh, S.R. , van Zanten , Advani, S.G. and Parnas, R.S. (2001). Fiber Optic Flow and Cure Sensing for Liquid Composite Molding , Optics and Lasers in Engineering, 35(2): 91–104 .

21.

Barooah, P. , Berker, B. and Sun, J.Q. (1998). Lineal Sensors for Liquid Injection Molding of Advanced Composite Materials , Journal of Materials Processing and Manufacturing Science, 6(3): 169–184 .

22.

Bickerton, S. and Advani, S.G. (1999). Characterization and Modeling of Race Tracking in Resin Transfer Molding , Composite Science and Technology, 59(15): 2215–2229 .

23.

Ma, Y. and Shishoo, R. (1999). Permeability Characterization of Different Architectural Fabrics , Journal of Composite Materials, 33(8): 729–750 .

24.

Wang, T.J. , Wu, C.H. and Lee, L.J. (1994). In-plane Permeability Measurement and Analysis in Liquid Composite Molding , Polymer Composites, 15(4): 278–288 .

Experimental Validation of Dependence Map based Control in Liquid Composite Molding

Abstract

Keywords

Get full access to this article

References