The effect of a negative bulk modulus phase in elastic composites is studied. Negative bulk modulus K<0 is shown to be possible in selected unit cells. In isotropic solids, K<0 can be attained when negative Poisson’s ratio is sufficiently small, below the stability limit (for stress control) 1/4 1. Such materials, if used as inclusions, are predicted to be stable with respect to the band formation, even if they are large. Composites with spherical inclusions of negative bulk moduli are shown to exhibit negative Poisson’s ratio and anomalies in composite bulk modulus and Young’s modulus (and in the corresponding mechanical damping) but not in the shear modulus.
Thompson, J.M.T. (1979). Stability Prediction through a Succession of Folds , Phil. Trans. Royal Soc. Lond., 292: 1-23 .
2.
Lakes, R.S. (2001). Extreme Damping in Composite Materials with a Negative Stiffness Phase , Physical Review Letters, 86: 2897-2900 .
3.
Lakes, R.S. (2001). Extreme Damping in Compliant Composites with a Negative Stiffness Phase , Philosophical Magazine Letters, 81: 95-100 .
4.
Lakes, R.S. , Lee, T. , Bersie, A. and Wang, Y.C. (2001). Extreme Damping in Composite Materials with Negative Stiffness Inclusions , Nature, 410: 565-567 .
5.
Falk, F. (1980). Model Free Energy, Mechanics, and Thermodynamics of Shape Memory Alloys , Acta Metall., 28: 1773-1780 .
6.
Salje, E. (1990). Phase Transitions in Ferroelastic and Co-Elastic Crystals, Cambridge University Press, Cambridge, UK .
7.
Timoshenko, S.P. and Goodier, J.N. (1970). Theory of Elasticity, 3rd edn, McGraw-Hill, New York, NY .
8.
Lakes, R.S. (1987). Foam Structures with a Negative Poisson’s Ratio , Science, 235: 1038-1040 .
9.
Lakes, R.S. (1993). Advances in Negative Poisson’s Ratio Materials , Advanced Materials, 5: 293-296 .
10.
Milton, G. (1992). Composite Materials with Poisson’s Ratios Close to 1 , J. Mech. Phys. Solids, 40: 1105-1137 .
11.
Knowles, J.K. and Sternberg, E. (1978). On the Failure of Ellipticity and the Emergence of Discontinuous Gradients in Plane Finite Elastostatics , J. Elasticity, 8: 329-379 .
12.
Bramble, J.H. and Payne, L.E. (1963). On the Uniqueness Problem in the Second Boundary Value Problem in Elasticity , In: Proc. Fourth National Congress of Applied Mechanics, pp. 469-473 .
13.
Sokolnikoff, I.S. (1983). Mathematical Theory of Elasticity, Krieger, Malabar, FL .
14.
Bazant, Z. and Cedolin, L. (1991). Stability of Structures, Oxford University Press, Oxford .
15.
Rosakis, P. , Ruina, A. and Lakes, R.S. (1993). Microbuckling Instability in Elastomeric Cellular Solids , J. Materials Science, 28: 4667-4672 .
16.
Lakes, R.S. and Drugan, W.J. (2002). Dramatically Stiffer Elastic Composite Materials due to a Negative Stiffness Phase? , J. Mechanics and Physics of Solids, 50: 979-1009 .
17.
Berglund, K. (1977). Investigation of a Two-Dimensional Model of a Micropolar Continuum , Archives of Mechanics, 29: 383-392 .
18.
Kindler, B. , Finsterbusch, D. , Graf, R. , Ritter, F. , Assmus, W. and Lũthi, B. (1994). Mixed-valence Transition in YbInCu4Phys. Rev. B, 50: 704-707 .
Francheschi, E. and Olcese, G.L. (1969). A New Allotropic Form of Cerium due to its Transition under Pressure to the Tetravalent State , Phys. Rev. Lett., 22: 1229-1300 .
21.
Bustingorry, S. , Jagla, E.A. and Lorenzana, J. (2003). Solid-solid Volume Collapse Transitions are Zeroth Order, arXiv: comd-mat/0307134, Vol. 1, 7 Jul.
22.
Young, D.A. (1991). Phase Diagrams of the Elements, p. 106, University of California Press, Berkeley, CA .
23.
Hedges, E.S. and Higgs, J.Y. (1952). Preparation of Grey Tin , Nature, 169: 621-622 .
24.
Bergman, D.J. and Halperin, B.I. (1976). Critical Behavior of an Ising Model on a Cubic Compressible Lattice , Phys. Rev. B, 13: 2145-2175 .
25.
Lakes, R.S. (1991). Deformation Mechanisms of Negative Poisson’s Ratio Materials: Structural Aspects , J. Materials Science, 26: 2287-2292 .
26.
Hashin, Z. and Shtrikman, S. (1963). A Variational Approach to the Theory of the Elastic Behavior of Multiphase Materials , J. Mech. Phys. Solids, 11: 127-140 .
27.
Hashin, Z. (1962). The Elastic Moduli of Heterogeneous Materials , J. Applied Mechanics, 29: 143-150 .
28.
Milton, G.W. (1986). Modelling the Properties of Composites by Laminates, In: Erickson, J.L. , Kinderlehrer, D. , Kohn, R. and Lions, J.L. (eds), Homogenization and Effective Moduli of Materials and Media, pp. 150-175, Springer Verlag, Berlin .
29.
Hashin, Z. (1965). Viscoelastic Behavior of Heterogeneous Media , J. Appl. Mech., Trans. ASME, 32E: 630-636 .
30.
Read, W.T. (1950). Stress Analysis for Compressible Viscoelastic Materials , J. Appl. Phys., 21: 671-674 .
31.
Christensen, R.M. (1969). Viscoelastic Properties of Heterogeneous Media , J. Mech. Phys. Solids, 17: 23-41 .
32.
Wang, Y.C. and Lakes, R.S. (2005). Stability of Negative Stiffness Viscoelastic Systems , Quarterly of Applied Math., 63: 34-55 .
33.
Shelby, R.A. , Smith, D.R. and Schultz, S. (2001). Experimental Verification of a Negative Index of Refraction , Science, 292: 77-79 .
34.
Smith, D.R. and Kroll, N. (2000). Negative Refractive Index in Left-handed Materials , Phys. Rev. Lett., 85: 2933-2936
35.
Nicorovici, N.A. , Mcphedran, R.C. and Milton, G.W. (1994). Optical and Dielectric Properties of Partially Resonant Systems , Phys. Rev. B, 49: 8479-8482 .
36.
Mackay, T.G. and Lakhtakia, A. (2004). A Limitation of the Bruggeman Formalism for Homogenization , Optics Communications, 234: 35-42 .
