Fabrication of Particle-Reinforced Polymers with Continuous Gradient Architectures Using Twin Screw Extrusion Process

Abstract

The operation of the twin screw extrusion (TSE) process under transient conditions is investigated for the manufacture of particle-reinforced polymers with continuous gradient architectures. Mixing models of the residence time distribution (RTD) and residence volume distribution (RVD) are used to characterize the TSE process. By convolving the mixing models with the transient input conditions, a new convolution process model has been developed to predict the gradient architectures that evolve within the extrudate. In situ optical contrast measurements and a posteriori measurements of optical contrast, density, and solids loading are used to verify the convolution process model for a step change in the input conditions.

Keywords

residence time distribution residence volume distribution functionally graded materials gradient architecture polymer composites convolution process model

Get full access to this article

View all access options for this article.

References

1. Suresh, S. and Mortenson, A. (1998). Fundamentals of Functionally Graded Materials, Institute of Materials, London, UK.

2. Markworth, A.J. , Ramesh, K.S. and Parks, Jr., W.P. (1995). Review: Modelling Studies Applied to Functionally Graded Materials, Journal of Materials Science, 30(9): 2183-2193.

3. Bruck, H.A. , Moore, C.L. and Valentine T.M. (2003). Bending Actuation in Polyurethanes with a Symmetrically Graded Distribution of One-way Shape Memory Alloy Wires, Experimental Mechanics, 44(1): 62-70.

4. Butcher, R.J. , Rousseau, C.-E. and Tippur., H.V. (1999). A Functionally Graded Particulate Composite: Preparation, Measurements and Failure Analysis, Acta Materialia, 47(1): 259-268.

5. Rauwendaal, C. (1986). Polymer Extrusion, 1st edn, Hanser Publishers, New York.

6. Kalyon, D.M. , Lawal, A. , Yazici, R. , Yaras, P. and Railkar, S. (1999). Mathematical Modeling and Experimental Studies of Twin-Screw Extrusion of Filled Polymers, Polymer Engineering and Science, 39(6): 1139-1151.

7. Mudalamane, R. and Bigio, D.I. (2003). Process Variations and the Transient Behavior of Extruders, AICHE Journal, 49(12): 3150-3160.

8. Gao, J. , Walsh, G.C. , Bigio, D. , Briber, R.M. and Wetzel, M.D. (1999). Residence-time Distribution Model for Twin Screw Extruders, AICHE Journal, 45(12): 2541-2549.

9. Danckwerts, P.V. (1953). Continuous Flow Systems: Distribution of Residence Times, Chemical Engineering Science, 2(1): 1-18.

10.

10. Gao, J. , Walsh, G.C. , Bigio, D. , Briber, R.M. and Wetzel, M.D. (2000). Mean Residence Time Analysis for Twin Screw Extruders, Polymer Engineering and Science, 40(1): 227-237.

11.

11. Gasner, G.E. , Bigio, D. , Marks, C. , Magnus, F. and Kiehl, C. (1999). A New Approach to Analyzing Residence Time and Mixing in a Co-rotating Twin Screw Extruder, Polymer Engineering and Science, 39(2): 286-298.

12.

12. Levenspiel, O. (1989). The Chemical Reactor Omnibook, OSU Book Stores, Inc., Corvallis, Oregon.

13.

13. Fogler, H.S. (1999). Elements of Chemical Reaction Engineering, Prentice Hall, Upper Saddle River, NJ.

14.

14. Nise, N.S. (2000). Control Systems Engineering, John Wiley & Sons, Inc., New York.