Interlocked Composite Grids Design and Manufacturing

Abstract

Composite grid structures made from pultruded unidirectional glass or carbon ribs promise to provide unmatched performance/cost combination of any composite panels. A new manufacturing method for a square grid using slotted joint and adhesive bonding (Interlocked Composite Grid or ICG) with pultruded ribs has been developed. Compared to previously proposed grids, it is mass producible at low cost. It has large potential for many applications, particularly for large civil structures. Equivalent stiffness models for the proposed ICG, in equivalent plate stiffness matrix form and equivalent engineering constant form, have been formulated and verified for the flexural behavior of ICGs. The effects of the slots have been considered and integrated in the model. Design guidelines with equivalent engineering constants, and approximate cost estimation rules have been established. An example problem has been solved to demonstrate the simplicity of the design rules. ICG beams and panels have been built and tested under static and dynamic flexural loading. Valuable test data are provided and superior mechanical properties, such as high damage tolerance, resilience, and durability have been demonstrated.

Keywords

composite grids unidirectional composites pultrusion equivalent stiffness

Get full access to this article

View all access options for this article.

References

1. Tsai, S. W. , Liu, K. S. and Manne, P. M. (1999). Manufacturing and Design of Composite Grids. In: Miravete, Antonio , (Ed.), 3-D Textile Reinforcements in Composite Materials, Chapter 5.

2. Hong-Ji Chen (1995). Analysis and Optimum Design of Composite Grid Structures, PhD Thesis, Stanford University, Stanford, CA, USA.

3. Steven M. Huybrechts (1995). Analysis and Behavior of Grid Structures, PhD Thesis, Stanford University, Stanford, CA, USA.

4. Tracy B. Colwell (1996). The Manufacturing and Application of Composite Grid Structures, PhD Thesis, Stanford University, Stanford, CA, USA.

5. Meink, Troy E. et al. (1996). Hybrid tooling for Advanced Grid Stiffened (AGS) Structures. In: Proceedings of the 1996 28th International SAMPE Technical Conference, Seattle, WA, USA, Technology Transfer in a Global Community International SAMPE Technical Conference Vol. 28, pp. 542–551, SAMPE, Covina, CA, USA.

6. Huybrechts, Steven et al. (1997). Advanced Grid Stiffened Structures for the Next Generation of Launch Vehicles. In: Proceedings of the 1997 IEEE Aerospace Conference, Snowmass Village, CO, USA, IEEE Aerospace Applications Conference Proceedings Vol. 1, 97CH36020, pp. 263–269.

7. Huybrechts, Steven et al. (1998). Ultra Lightweight Structures for Deployed Optics. In: Proceedings of the 1998 IEEE Aerospace Conference, Part 2 (of 5), Snowmass at Aspen, CO, USA, IEEE Aerospace Applications Conference, Proceedings Vol. 2, IEEE Comp. Soc., Los Alamitos, CA, USA, 98TH8339, pp. 83–88.

8. Timothy G. Gutowski (1997). Cost, Automation, and Design, Advanced Composites Manufacturing, p. 525-525, Wiley Inter-Science.

9. Dongyup Han (2001). Design and Manufacturing of Interlocked Composite Grids, PhD Thesis, Stanford University, Stanford, CA, USA.

10.

10. Tsai, S. W. (1992). Theory of Composite Design, Think Composites, Dayton, OH.