Micro-hardness and Flexural Properties of Randomly-oriented Carbon Nanotube Composites

Abstract

The carbon nanotubes possess many unique mechanical and electrical properties, and have been appreciated as new advanced materials for nanocomposite structures, particularly for the development of nanocomposite films. Nanotubes may also be used as nano-reinforcements for matrix system for fibre-reinforced plastic structures in order to improve out-of-plane properties, thus increasing the delamination resistance. However, those properties are highly relied on the structural integrity and homogeneity of the nanotube composites. Unfortunately, only a little works have paid much attention on these issues recently. It has been obviously proved that the atomic architecture on the nanotube’s surface may be affected after the nanotubes were chemically reacted with polymer matrix. The weak bonding force among the different layers (bonded by a weak Van Der Waals attractive force) of multiwalled nanotubes may also cause a discontinuous stress transfer from the outer-shell to the inner of the composites. This paper reports the micro-hardness and flexural properties of nanotube composites with different amounts of nanotubes content. Experimental measurements and microscopic observations of the nanotube-epoxy composites before and after the tests are discussed in detail. The results show that the hardness of the nanotube composites varied with different nanotube weight fractions. The flexural strength decreased by 10% for a nanotube composite beam with 2 wt.% of nanotubes. The SEM images also revealed that all nanotubes were completely pulled out after the flexural strength test due to a weak-bonding strength between the nanotube and matrix.

Keywords

carbon nanotubes nanocomposites hardness properties

Get full access to this article

View all access options for this article.

References

1. (1996). Dresselhaus, M. S. , Dresselhaus, G. and Eklund, P. C. (eds.) Science of Fullerences and Carbon Nanotubes, Academic Press, Inc., UK.

2. Bower, C. , Rosen, R. , Jin, L. , Han, J. and Zhou, O. (1999). Deformation of Carbon Nanotubes in Nanotube-polymer Composites, Appl. Phys. Lett., 74: 3317–3319.

3. Vigolo, B. , Penicaud, A. , Coulon, C. , Sauder, C. , Pailler, R. , Journet, C. , Bernier, P. and Poulin, P. (2000). Macroscopic Fibers and Ribbons of Oriented Carbon Nanotubes, Science, 290: 1331–1334.

4. Dresselhaus, M. S. , Fresselhaus, G. and Saito, R. (1995). Physics of Carbon Nanotubes, Carbon, 33: 883–891.

5. Mintmire, J. W. and White, C. T. (1995). Electronic and structural properties of carbon nanotubes, Carbon, 33: 893–902.

6. Files, B. S. (2000). Processing of Crabon Nanotubes for Revolutionary Space Applications, AIAA Report, AIAA-2000-5345.

7. Rotman, D. (March 2002). The Nanotube Computer, Mit’s Magazine of Innovation Technology Review, 36–45.

8. Sandler, J. , Shaffer, M. S. P. , Prasse, T. , Bauhofer, W. , Schulte, K. and Windle, A. H. (1999). Development of a Dispersion Process for Carbon Nanotubes in an Epoxy Matrix and the Resulting Electrical Properties, Polymer, 40: 5967–5971.

9. Lourie, O. , Cox, D. M. and Wagner, H. D. (1998). Buckling and Collapse of Embedded Carbon Nanotubes, Phys. Rev. Lett., 81: 1638–1641.

10.

10. Lau, K. T. and Hui, D. (2002). The Revolutionary Creation of New Advanced Materials – Carbon Nanotube Composites, Comp. Pt. B, 33: 263–271.

11.

11. Journet, C. and Bernier, P. (1998). Production of Carbon Nanotubes, Appl. Phys. A: Mater. Sci. Proc., 67: 1–9.

12.

12. Ajayan, P. M. , Stephen, O. , Colliex, C. and Trauth, D. (1994). Aligned Carbon Nanotube Arrays Formed by Cutting a Polymer Resin-Nanotube Composite, Science, 265: 1212–1214.

13.

13. Jin, L. , Bower, C. and Zhou, O. (1998). Alignment of Carbon Nanotubes in a Polymer Matrix by Mechanical Stretching, Appl. Phys. Lett. 73(9): 1197–1199.

14.

14. Qian, D. , Dickey, E. C. , Andrews, R. and Rantell, T. (2000). Load Transfer and Deformation Mechanisms in Carbon Nanotube-polystyrene Composites, 76(20): 2868–2870.