Analysis of Delamination Growth in Laminated Composites with Consideration for Residual Thermal Stress Effects

Abstract

This paper presents the results of a buckling and postbuckling analysis and modeling of embedded delaminations, and the prediction of delamination growth in laminated composites with consideration for residual thermal stresses. The distribution of the local strain energy release rate along the delamination front is obtained via the virtual crack closure technique applied to three-dimensional (3D) finite element models of circular delaminations embedded in woven and nonwoven composite laminates. In each case, the delamination is embedded at a different depth along the thickness direction of the laminates. The fibre orientation of the plies bounding the delamination significantly influences the distribution of the local strain energy release rate. There is general qualitative agreement between the predicted directions of delamination growth and C-scan results of the embedded delaminations. It is found that residual thermal stresses have a significant effect on the onset of buckling of the delaminated sublaminate, but negligible influence on the distribution of the local strain energy release rate in the postbuckled regime. Furthermore, the effect of residual thermal stresses is more pronounced for delaminations that are closer to the surface. A method for the prediction of delamination areas and directions using fatigue growth criteria derived from test coupon data is also presented. It is found that growth criteria based on components of the strain energy release rate predict the rate of delamination growth much better than those based on the total strain energy release rate.

Keywords

delamination growth residual thermal stresses strain energy release rate

Get full access to this article

View all access options for this article.

References

1. O’Brien, T.K. (1998). Composite interlaminar shear fracture toughness, GIIc: shearmeasurement orshearmyth?. In: Bucinell, R.B. (ed.), Composite Materials: Fatigue and Fracture, 7th Volume. ASTM STP 1330. pp. 3–18.

2. Svensson, N. and Gilchrist, M.D. (1998). Mixed-mode delamination of multidirectional carbon fiber/epoxy laminates. Mech. of Comp. Mater. & Struct., 5: 291–307.

3. Martin, R.H. (1996). Interlaminar fracture characterization. Key Engrg. Mater., 121–122: 329–346.

4. Brunner, A.J. (2000). Experimental aspects of mode I and mode II fracture toughness testing of fibre-reinforced polymer-matrix composites. Comput. Methods Appl. Mech. Engrg., 185: 161–172.

5. Davies, P. , Blackman, B.R.K. and Brunner, A.J. (1998). Standard test methods for delamination resistance of composite materials: current status. Appl. Compos. Mater., 5: 345–364.

6. O’Brien, T.K. , Murri, G.B. and Salpekar, S.A. (1989). Interlaminar shear fracture toughness and fatigue thresholds for composite materials. In: Lagace, P.A. (ed.), Composite Materials: Fatigue and Fracture, 2nd Volume. ASTM STP 1012. pp. 222–250.

7. Tao, J. and Sun, C.T. (1998). Influence of ply orientation on delamination in composite laminates. J. Compos. Mater., 32(21): 1933–1947.

8. Whitcomb, J.D. (1989). Three-dimensional analysis of a postbuckled embedded delamination.J. Compos. Mater., 23: 862–889.

9. Jonsson, N. and Storakers, B. (1996). On buckling and fracture behaviour of delaminations. Eur. J. Mech., A/Solids, 15(2): 183–198.

10.

10. Klug, J. , Wu, X.X. and Sun, C.T. (1996). Efficient modeling of postbuckling delamination growth in composite laminates using plate elements. AIAA J., 34(1): 178–184.

11.

11. Pavier, M.J. and Clarke, M.P. (1996). A specialized composite plate element for problems of delamination buckling and growth. Compos. Struct., 34: 43–53.

12.

12. Zou, Z. , Reid, S.R. , Soden, P.D. and Li, S. (2001). Mode separation of energy release rate fordelamination in composite laminates using sublaminates. Int. J. Solids & Struct., 38: 2597–2613.

13.

13. Krueger, R. and O’Brien, T.K. (2001). A shell/3D modeling technique for the analysis of delaminated composite laminates. Composites: Part A, 32: 25–44.

14.

14. Fish, J.C. and Malaznik, S.D. (1996). Fracture of double beam specimens containing 90-degree plies. Key Engrg. Mater., 121–122: 347–360.

15.

15. Nairn, J.A. (2000). Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses. Inter. J. Adhesion & Adhesives, 20: 59–70.

16.

16. Yin, W.L. (1998). Thermoelastic postbuckling response of strip delamination models. Int. J. Solids & Struct., 35(25): 3331–3346.

17.

17. Jih, C.J. and Sun, C.T. (1993). Prediction of delamination in composite laminates subjected to low velocity impact. J. Compos. Mater., 27(7): 684–701.

18.

18. Mohlin, T. , Blom, A.F. , Carlsson, L.A. and Gustavsson, A.I. (1985). Delamination growth in a notched graphite/epoxy laminate under compression fatigue loading. In: Johnson, W.S. (ed.), Delamination and Debonding of Materials. ASTM STP 876. pp. 168–188.

19.

19. Ramkumar, R.L. and Whitcomb, J.D. (1985). Characterization of mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy. In: Johnson, W.S. (ed.), Delamination and Debonding of Materials. ASTM STP 876. pp. 315–335.

20.

20. Rybicki, E.F. and Kanninen, M.F. (1977). A finite element calculation of stress intensity factors by a modified crack closure integral. Engrg. Fract. Mech., 9: 931–938.

21.

21. Tay, T.E. , Shen, F. , Lee, K.H. , Scaglione, A. and Di Sciuva, M. (1999). Mesh design in finite element analysis of post-buckled delamination in composite laminates. Compos. Struct., 47: 603–611.

22.

22. Narayana, K.B. , George, S. , Dattaguru, B. , Ramamurthy, T.S. and Vijayakumar, K. (1994). Modified crack closure integral (MCCI) for 3D problems using 20 noded brick elements. Fatigue Fract. Eng. Mater. Struct., 17(2): 145–157.

23.

23. Manoharan, M.G. and Sun, C.T. (1990). Strain energy release rates of an interfacial crack between two anisotropic solids under uniform axial strain. Compos. Sci. & Tech., 39(2): 99–116.

24.

24. Dattaguru, B. , Venkatesha, K.S. , Ramamurthy, T.S. and Buchholz, F.G. (1994). Finite element estimates of strain energy release rate components at the tip of an interface crack under mode I loading. Engrg. Fract. Mech., 49(3): 451–463.

25.

25. Raju, I.S. , Crews, Jr. J.H. and Aminpour, M.A. (1988). Convergence of strain energy release rate components for edge-delaminated composite laminates. Engrg. Fract. Mech., 30(3): 383–396.

26.

26. Hutchinson, J.W. and Suo, Z. (1992). Mixed mode cracking in layered materials. In: Hutchinson, J.W. and Wu, T.Y. (eds.), Advances in Applied Mechanics. Vol. 29. New York: Academic Press.

27.

27. Krueger, R. , Cvitkovich, M.K. , O’Brien, T.K. and Minguet, P.J. (2000). Testing and analysis of composite skin/stringer debonding under multi-axial loading. J. Compos. Mater., 34(15): 1263–1300.

28.

28. Whitcomb, J.D. (1992). Analysis of a laminate with a postbuckled delamination including contact effects. J. Compos. Mater., 26(10): 1523–1535.