Experiments and Analysis of Collapse Behaviour of Composite Domes under Axial Compression

Abstract

Composite domes made of short, randomly oriented glass fiber mats with polyester resin were subjected to axial compression in an Instron machine, in both empty and foam filled conditions. The domes were of different sizes and their generator was a parabola. The mechanics of deformation and the energy absorbing characteristics of the shells were studied, and their load compression curves are presented. The effect of foam filling on the response of the domes is discussed. Based on the experimental observations analytical expressions were formulated to find the average crush load and total strain energy by considering the energy absorbed in different mechanisms involved in the crushing process. The results thus obtained were compared with experimental results and these match well. Some conical shells made of the same material, height and diameter as those of domes were also subjected to axial compression, and their behavior is compared with those of the corresponding domes.

Get full access to this article

View all access options for this article.

References

1. Ezra, A.A. and Fay, R.J. (1971). An assessment of energy absorbing devices for prospective use in aircraft impact situations. In: Herrmann and Perrone, N. (eds.), Dynamic Response of Structures. Proc. of a symposium, held at Stanford University, California. pp. 225–245. 28 and 29 June.

2. Johnson, W. and Reid, S.R. (1978). Metallic Energy Dissipating Systems. London: Mech. Engg. Publications Ltd.

3. Jones, N. and Wierzbicki, T. (1993). In: Elsevier Applied Science (eds.), Structural Crashworthiness and Failure.

4. Thornton, P.H. and Edwards, P.J. (1982). Energy absorption in composite tubes. J. of Composite Materials, 16: 521–545.

5. Hull, D. (1983). Axial crushing of fiber-reinforced composite tubes. In: Jones, N. and Weirzbicki, T. (eds.), Structural Crashworthiness. London: Butterworths. pp. 118–135.

6. Hamada, H. and Ramakrishna, S. (1995). Crushing mechanism of carbon fiber/PEEK composite tubes. Composites, 26: 749–755.

7. Gupta, N.K. , Velmurugan, R. and Gupta, S.K. (1997). An analysis of axial crushing of composite tubes. J. of Composite Materials, 31: 1262–1286.

8. Mamalis, A.G. , Manolakos, D.E. , Demosthenous, G.A. and Loannidis, M.B. (1996). Analysis of failure mechanisms observed in axial collapse of thin-walled circular fiberglass composite tubes. Thin Walled Structures, 24: 335–352.

9. Price, J.N. and Hull, D. (1987). Axial crushing of glass fiber-polyester composite cones. Composite Science and Technology, 28: 211–230.

10.

10. Gupta, N.K. and Velmurugan, R. (1999). An analysis of axial compression of foam filled composite conical shells. J. of Composite Materials, 33: 567–591.

11.

11. Mamalis, A.G. , Manolakos, D.E. , Demosthenous, G.A. and Loannidis, M.B. (1997). Analytical modeling of static and dynamic axial collapse of thin walled fiberglass composite conical shells. Int. J. of Impact Engg., 19: 477–492.

12.

12. Reddy, T.Y. and Wall, R.J. (1988). Axial compression of foam filled thin-walled circular tubes. Int. J. of Impact Engg., 7: 151–166.

13.

13. Gupta, N.K. and Eswara Prasad, G.L. (1999). Quasi-static and dynamic axial compression of glass/polyester composite spherical shells. Int. J. of Impact Eng., 22: 757–774.

14.

14. Gupta, N.K. and Velmurugan, R. Analysis of composite shells under axial crushing. Int. J. of Crashworthiness, 5: 333–344.

15.

15. ASM International , (1987). Composites-Engineering Materials Handbook. Vol. 1.