Sage Journals: Discover world-class research

Abstract

Results are presented for a series of tests on filament wound glass fibre reinforced pipes which have been subject to prolonged exposure to high temperature water. Two materials systems in common use in offshore piping applications are tested: continuous fibre e-glass in a phenolic and an epoxy resin matrix, respectively. This is the first work on this type on water saturated GRP at very high temperatures up to 160 C.

The results of water absorption tests on the two material systems at 95 C are presented. It is shown that saturated conditions can be achieved within seven days at this temperature.

Creep modulus test results for the two material systems as a function of temperature up to 160 C are presented. The reduction in TG for the epoxy material in the saturated state is quantified and it is shown that the phenolic material is largely unaffected by water absorption.

The results of biaxial tensile loading tests for the two material systems are presented in the form of failure envelopes at temperatures from 20to 160 C. The considerable weakening of the epoxy system, particularly under the matrix dominated loading conditions, is quantified and it is shown that the failure envelope for the phenolic system is largely unaffected by temperature.

Finally, a comparison is made between the two materials as a function of loading condition and temperature as a design guide.

Keywords

GRP FRP tensile strength environmental testing water offshore environment biaxial loading failure envelope creep modulus water absorption

Get full access to this article

View all access options for this article.

References

1. Dow, R.S. and Bird, J. (1994). The Use of Composites in Marine Environments. Ironmaking and Steelmaking, 21(6): 431–444.

2. Gibson, A.G. (1993). Composites in offshore structures. Chapter 11, Shenoi, R.A. and Wellicome, J.F. (eds.), Composite Materials in Maritime Structures, Vol. 2, Cambridge University Press.

3. MacInally, A. and Miller, A.H. (1998). The use of epoxy vinyl ester resin systems in the marine, offshore, chemical and construction industries. Proc. FRC 98, University of Newcastle, Newcastle upon Tyne, UK.

4. Folkers, J.L. , Freidrich, R.S. and Fortune, M. (1997). High performance phenolic piping for oilfield applications. NACE Annual Conference.

5. Schutte, Carol, L. (1994). Environmental durability of glass-fiber composites. Materials Science and Engineering, R13(7).

6. Ishida, H. and Koenig, J.L. (1978). Reinforcement mechanism of fiber-glass reinforced plastics under wet conditions: A review. Polymer Engineering and Science, 18(2).

7. Hale, J.M. and Gibson, A.G. (1998). Coupon tests of fibre reinforced plastics at elevated temperatures in offshore processing environments. J. of Composite Materials, 32(4).

8. Hale, J.M. , Gibson, A.G. and Speake, S.D. (1998). Tensile strength testing of GRP pipes at elevated temperatures in aggressive offshore environments. J. of Composite Materials, 32(10).

9. Hale, J.M. and Gibson, A.G. (1998). An environmental chamber for tensile testing coupon specimens in the presence of aggressive media at elevated temperatures and pressures. Experimental Techniques, 22(5).

Biaxial Failure Envelope and Creep Testing of Fibre Reinforced Plastic Pipes in High Temperature Aqueous Environments

Abstract

Keywords

Get full access to this article

References