Fracture Toughness of Carbon Foam

Abstract

Mode I fracture toughness of open cell carbon foam was measured using single edge notched four-point bend specimens. A micromechanical model was developed assuming a rectangular prism as the unit-cell. A small region surrounding the crack tip was modeled using finite elements. Displacement boundary conditions were applied to the boundary of the region based on linear elastic fracture mechanics for orthotropic materials. From the finite element results the Mode I stress intensity factor that will cause failure of a crack tip element was determined and it was taken as the predicted fracture toughness of the foam. A simpler model in which the foam consisted of struts of square cross section was also considered. The micromechanical simulations were used to study the variation of fracture toughness as a function of solidity of the foam. The good agreement between the finite element and experimental results for fracture toughness indicates that micromechanics can be an effective tool to study crack propagation in cellular solids.

Get full access to this article

View all access options for this article.

References

1. Gibson, L.J. and Ashby, M.F. (1988). Cellular Solids: Structure and Properties, 2nd edn, pp. 219-222, Cambridge University Press, Cambridge, United Kingdom .

2. Choi, S. and Sankar, B.V. (2002). Micromechanical Methods to Predict the Fracture Toughness of Cellular Solids, Technical Report, Department of Mechanical and Aerospace Engineering, University of Florida, PO Box 116250, Gainesville, FL 32611 .

3. Hellan, K. (1984). Introduction to Fracture Mechanics, p. 244, McGraw-Hill, NY.

4. Sih, G.C. and Liebowitz, H. (1968). Mathematical Theories of Brittle Fracture, In: Liebowitz, H., (ed.), Fracture - An Advanced Treatise, Vol. 2, pp. 67-190, Academic Press, New York .

5. W. Charless Fowlkes (1974). Fracture Toughness Tests of a Rigid Polyurethane Foam , International Journal of Fracture, 10(1): 99-108 .

6. Marrey, Ramesh V. and Sankar, Bhavani V. (1995). Micromechanical Models for Textile Structural Composites, NASA Contractor Report 198229.