Similitude and Physical Modeling for Buckling and Vibration of Symmetric Cross-Ply Laminated Circular Cylindrical Shells

Abstract

The similitude invariant and the scaling laws of the symmetric cross-ply laminated circular cylindrical shells for buckling and free vibration problems are derived by applying the similitude transformation to the governing differential equations directly. The scaling laws obtained by this approach are unique because they are forced by the governing differential equations. In the absence of the experimental data, the validity of the scaling laws is verified by numerical experiments. This is done by calculating theoretically the buckling loads and fundamental frequencies for free vibration of the model and substituting into the scaling laws. The predicted values of the prototype from the scaling laws are then compared with those values from the closed-form solution. Examples for the complete similitude cases with various stacking sequences, number of plies, and radius ratios show exact agreement. The presented relationships between the model and prototype will greatly facilitate and reduce the costly experiment. In reality, it may not be feasible to construct the model to fulfill the similarity requirements completely. Several cases of partial similitude are investigated and verified numerically. Modeling with distortion in stacking sequences is recommended, but model with distortion in material properties yields moderately high percent of discrepancy.

Get full access to this article

View all access options for this article.

References

1. Tuttle, M., Singhatanadgid, P. and Hinds, G. (1999). Buckling of Composite Panels Subjected to Biaxial Loading , Experimental Mechanics, 39(3): 191-201 .

2. Simitses, G.J. and Rezaeepazhand, J. (1993). Structural Similitude for Laminated Structures , Composites Engineering, 3(7-8): 751-765 .

3. Simitses, G.J. and Rezaeepazhand, J. (1994). Structural Similitude and Scaling Laws for Cross-Ply Laminated Plates , In: Proceedings of the American Society for Composites, pp. 265-274 , Ohio Aerospace Institute, Technomic Pub. Co. Inc., Lancaster, PA.

4. Rezaeepazhand, J., Simitses, G.J. and Starnes, J.H. Jr. (1995). Design of Scaled Down Models for Stability of Laminated Plates , AIAA Journal, 33(3): 515-519 .

5. Simitses, G.J., Starnes, J.H. Jr and Rezaeepazhand, J. (2000). Structural Similitude and Scaling Laws for Plates and Shells: A Review , Collection of Technical Papers-AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, pp. 393-403 , Vol. 1, April 3-6, AIAA-2000-1383, Pub. by AIAA Inc.

6. Rezaeepazhand, J. and Simitses, G.J. (1996). Scale Models for Laminated Cylindrical Shells Subjected to Axial Compression , Composite Structures, 34(4): 371-379 .

7. Tabiei, A., Sun, J. and Simitses, G.J. (1997). Scaling Laws of Cylindrical Shells Under Lateral Pressure , AIAA Journal, 35(10): 1669-1671 .

8. Ungbhakorn, V. (2001). A New Approach for Establishing Structural Similitude for Buckling of Symmetric Cross-Ply Laminated Plates Subjected to Combined Loading , Thammasat International Journal of Science and Technology, 6(3): 55-60 .

9. Singhatanadgid, P. and Ungbhakorn, V. (2002). Buckling Similitude Invariants of Symmetrically Laminated Plates Subjected to Biaxial Loading , SEM Annual Conference and Exposition, June 10-12, Hyatt Regency, Milwaukee, Wisconsin USA.

10.

10. Ungbhakorn, V. and Singhatanadgid, P. (2003). Similitude Invariants and Scaling Laws for Buckling Experiments on Anti-Symmetrically Laminated Plates Subjected to Biaxial Loading , Composite Structures, 59(4): 455-465 .

11.

11. Singhatanadgid, P. and Ungbhakorn, V. (2002). Scaling Laws for Vibration Response of Anti-Symmetrically Laminated Plates , Structural Engineering and Mechanics, An International Journal, 14(3): 345-364 .

12.

12. Kline, S.J. (1965). Similitude and Approximation Theory, McGraw Hill Inc., New York .

13.

13. Skoglund, Victor J. (1967). Similitude: Theory and Applications, International Textbook Company, Scranton, Pennsylvania .

14.

14. Szücs, Errin (1980). Similitude and Modelling, Elsevier Scientific Publishing Co., New York .

15.

15. Jones, R.M. (1968). Buckling of Circular Cylindrical Shells with Multiple Orthotropic Layers and Eccentric Stiffeners , AIAA Journal, 6(12): 2301-2305 .

16.

16. Brush, D.O. and Almroth, B.O. (1975). Buckling of Bars, Plates and Shells, McGraw-Hill, New York .

17.

17. Jones, R.M. and Morgan, H.S. (1975). Buckling and Vibration of Cross-Ply Laminated Circular Cylindrical Shells , AIAA Journal, 13(5): 664-671 .