A pulse-shaped split Hopkinson pressure bar (SHPB) was employed to determine the dynamic compressive mechanical responses and failure behaviors of a S-2 glass/SC15 composite along two perpendicular directions under valid dynamic testing conditions. The loading pulses in SHPB experiments were precisely controlled to ensure that the composite specimen deforms at a nearly constant strain rate under dynamically equilibrated stress during dynamic compression. Quasi-static experiments were conducted with an MTS and an Instron to study material rate sensitivity over a wider range. The compressive stress-strain behaviors along both directions were found to be strain-rate sensitive, but with different strain-rate sensitivities. A compressive constitutive model with strain-rate and damage effects was modified to accurately describe both quasi-static and dynamic compressive stress-strain behaviors of the composite material along the two perpendicular directions.
2. Hahn, H.T. and Tsai, S.W. (1973). Nonlinear Elastic Behavior of Unidirectional Composite Laminate , Journal of Composite Materials, 7: 102-118 .
3.
3. Tay, T.E., Ang, H. and G., Shim, V.P.W. (1995). An Empirical Strain Rate-Dependent Constitutive Relationship for Glass-Fibre Reinforced Epoxy and Pure Epoxy , Composite Structures, 33: 201-210 .
4.
4. Thiruppukuzhi, S.V. and Sun, C.T. (2001). Models for the Strain-Rate-Dependent Behavior of Polymer Composites , Composites Science and Technology, 61: 1-12 .
5.
5. Weeks, C.A. and Sun, C.T. (1998). Modeling Non-linear Rate-Dependent Behavior in Fiber-Reinforced Composites , Composites Science and Technology, 58: 603-611 .
6.
6. Harding, J. and Dong, L. (1994). Effect of Strain Rate on the Interlaminate Shear Strength of Carbon-Fibre-Reinforced Laminates , Composites Science and Technology, 51: 347-358 .
7.
7. Gates, T.S. and Sun, C.T. (1991). Elastic/Viscoplastic Constitutive Model for Fiber Reinforced Thermoplastic Composites , AIAA Journal, 29: 457-463 .
8.
8. Yoon, K.J. and Sun, C.T. (1991). Characterization of Elastic-Viscoplastic Properties of an AS4/PEEK Thermoplastic Composite , Journal of Composite Materials, 25: 1277-1313 .
9.
9. Davies, C.H.J., Hawbolt, E.B., Samarasekera, I.V. and Brimacombe, J.K. (1997). Constitutive Behavior of Composite of AA6061 and Alumina , Journal of Materials Processing Technology, 70: 244-251 .
10.
10. Sun, C.T., Chung, I. and Chang, I.Y. (1992). Modeling of Elasic-Plastic Behavior of LDFTMand Continuous Fiber Reinforced AS-4/PEEK Composites , Composites Science and Technology, 43: 339-345 .
11.
11. Harding, J. (1989). Impact Damage in Composite Materials , Science and Engineering of Composite Materials, 1: 41-68 .
12.
12. Abrate, S. (1991). Impact on Laminated Composites , Applied Mechanics Review, 44: 155-190 .
13.
13. Abrate, S. (1994). Impact on Laminated Composites: Recent Advances , Applied Mechanics Review, 47: 517-544 .
14.
14. Cantwell, W.J. and Morton, J. (1991), The Impact Resistance of Composite Materials - A Review , Composites, 22: 347-362 .
15.
15. Kolsky, H. (1949). An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading , Proceedings of the Physical Society of London, B62: 676-700 .
16.
16. Gray, G.T. (2000). Classic Split-Hopkinson Pressure Bar Testing, Mechanical Testing and Evaluation , Metals Handbook, 8: 462-476 , American Society for Metals, Materials Park, OH .
17.
17. Chen, W., Wu, Q., Kang, J.H. and Winfree, N.A. (2001). Compressive Superelastic Behavior of a NiTi Shape Memory Alloy at Strain Rates of 0.001 to 750 s 1 , International Journal of Solids and Structures, 38: 8989-8998 .
18.
18. Chen, W. and Ravichandran, G. (1996). Static and Dynamic Compressive Behavior of Aluminum Nitride under Moderate Confinement , Journal of the American Ceramic Society, 79: 579-584 .
19.
19. Chen, W. and Ravichandran, G. (1997). Dynamic Compressive Behavior of a Glass Ceramic under Lateral Confinement , Journal of the Mechanics and Physics of Solids, 45: 1303-1328 .
20.
20. Chen, W. and Ravichandran, G. (2000). Failure Mode Transition in Ceramics Under Dynamic Multiaxial Compression , International Journal of Fracture, 101: 141-159 .
21.
21. Chen, W., Lu, F. and Winfree, N. (2002). High-Strain-Rate Compressive Behavior of a Rigid Polyurethane Foam with Various Densities , Experimental Mechanics, 42: 65-73 .
22.
22. Song, B. and Chen, W. (2003). Dynamic Compressive Constitutive Behavior of EPDM Rubber , Transactions of the ASME, Journal of Engineering Materials and Technology (to appear).
23.
23. Chen, W., Lu, F., Frew, D.J. and Forrestal, M.J. (2002). Dynamic Compression Testing of Soft Materials , Transaction of the ASME, Journal of Applied Mechanics, 69: 214-223 .
24.
24. Sierakowski, R.L. and Chaturvedi, S.K. (1997). Dynamic Loading and Characterization of Fiber-Reinforced Composites, John Wiley & Sons, Inc., New York, NY .
25.
25. Woldesenbet, E. and Vinson, J.R. (1999). Specimen Geometry Effects on High-Strain-Rate Testing of Graphite/Epoxy Composites , AIAA Journal, 37: 1102-1106 .
26.
26. Dee, A.T., Vinson, J.R. and Sankar, B. (2001). Through-Thickness Stitching Effects on Graphite/Epoxy High-Strain-Rate Compressive Properties , AIAA Journal, 39: 126-133 .
27.
27. Kumar, P., Garg, A. and Agarwal, B.D. (1986). Dynamic Compressive Behaviour of Unidirectional GFRF for Various Fibre Orientations , Materials Letters, 4: 111-116 .
28.
28. El-Habak, A.M.A. (1991). Mechanical Behaviour of Woven Glass Fibre-Reinforced Composites under Impact Compression Load , Composites, 22: 129-134 .
29.
29. Staab, G.H. and Gilat, A. (1995). High Strain Rate Response of Angle-Ply Glass/Epoxy Laminates , Journal of Composite Materials, 29: 1308-1320 .
30.
30. Chocron Benloulo, I.S., Rodrignez, J., Martinez, M.A. and Sanchez Galvez, V. (1997). Dynamic Tensile Testing of Aramid and Polythylene Fiber Composites , International Journal of Impact Engineering, 19: 135-146 .
31.
31. Powers, B.M., Vinson, J.R. and Hall, I.W. (1997). High Strain Rate Properties of Cycom 5920/1583 Cloth Glass/Epoxy Composites , AIAA Journal, 35: 553-556 .
33. Thiruppukuzhi, S.V. and Sun, C.T. (1998). Testing of Modeling High Strain Rate Behaviour of Polymeric Composites , Composites, 29B: 535-546 .
34.
34. Welsh, L.M. and Harding, J. (1985). Effect of Strain Rate on the Tensile Failure of Woven Reinforced Polyester Resin Composites , Journal de Physique, C5: C5-405-C5-414 .
35.
35. Wang, Y. and Xia, Y. (2000). A Modified Constitutive Equation for Unidirectional Composites under Tensile Impact and the Dynamic Tensile Properties of KFRP , Composites Science and Technology, 60: 591-596 .
36.
36. Gary, G., Klepaczko, J.R. and Zhao, H. (1992). Corrections for Wave Dispersion and Analysis of Small Strains with Split Hopkinson Bar , In: Proceedings of the International Symposium of Impact Engineering, pp. 73-78 , Sendai, Japan.
37.
37. Zhao, H., Gary, G. and Klepaczko, J.R. (1997). On the Use of a Viscoelastic Split Hopkinson Pressure Bar , International Journal of Impact Engineering, 15: 669-686 .
38.
38. Ninan, L., Tsai, J. and Sun, C.T. (2001). Use of Split Hopkinson Pressure Bar for Testing Off-Axis Composites , International Journal of Impact Engineering, 25: 291-313 .
39.
39. Song, B. and Chen, W. (2003). Dynamic Stress Equilibrium on a Rubber Specimen during a Split Hopkinson Pressure Bar Experiment, Experimental Mechanics (submitted).
40.
40. Wu, X.J. and Gorham, D.A. (1997). Stress Equilibrium in the Split Hopkinson Pressure Bar Test , Journal de Physique IV France Colloque, C3 (DYMAT 97), 7: 91-96 .
41.
41. Nemat-Nasser, S., Isaacs, J.B. and Starrett, J.E. (1991). Hopkinson Techniques for Dynamic Recovery Experiments , Proceedings: Mathematical and Physical Sciences, 435: 371-391 .
42.
42. Chen, W., Song, B., Frew, D.J. and Forrestal, M.J. (2003). Dynamic Small Strain Measurements of Metal Specimen with a Split Hopkinson Pressure Bar , Experimental Mechanics, 43: 20-23 .
43.
43. Annual Book of ASTM Standards (2001). 15.03, West Conshohocken, PA.
44.
44. Frew, D.J., Forrestal, M.J. and Chen, W. (2002). Pulse Shaping Techniques for Testing Brittle Materials with a Split Hopkinson Pressure Bar , Experimental Mechanics, 42: 93-106 .
45.
45. Frew, D.J., Forrestal, M.J. and Chen, W. (2001). A Split Hopkinson Pressure Bar Technique to Determine Compressive Stress-Strain Data for Rock Materials , Experimental Mechanics, 41: 40-46 .
46.
46. Ravichandran, G. and Subhash, G. (1994). Critical Appraisal of Limiting Strain Rates for Compression Testing of Ceramics in a Split Hopkinson Pressure Bar , Journal of the American Ceramic Society, 77: 263-267 .
47.
47. Kapoor, R. and Nemat-Nasser, S. (1998). Determination of Temperature Rise during High Strain Rate Deformation , Mechanics of Materials, 27: 1-12 .
48.
48. Hodowany, J., Ravichandran, G., Rosakis, A.J. and Rosakis, P. (2000). Partition of Plastic Work into Heat and Stored Energy in Metals , Experimental Mechanics, 40: 113-123 .
49.
49. Rittel, D. (1998). Transient Temperature Measurement Using Embedded Thermocouples , Experimental Mechanics, 38: 73-78 .
50.
50. Belingardi, G. and Vadori, R. (2002). Low Velocity Impact Tests of Laminate Glass-Fiber-Epoxy Matrix Composite Material Plates , International Journal of Impact Engineering, 27: 213-229 .
51.
51. Srinivasan, K., Jackson, W.C., Smith, B.T. and Hinkley, J.A. (1992). Characterization of Damage Modes in Impacted Thermoset and Thermoplastic Composites , Journal of Reinforced Plastics and Composites, 11: 1111-1126 .
52.
52. Davies, G.A.O. and Zhang, X. (1995). Impact Damage Prediction in Carbon Composite Structures , International Journal of Impact Engineering, 16: 149-170 .
53.
53. Wang, L. and Yang, L. (1992). Non-linear Viscoelastic Constitutive Relationship for Solid Polymers, In: Wang, L., Yu, T. and Li, Y. (eds), Advances in Impact Dynamics, pp. 88-116, University of Science and Technology of China Publications, Hefei, China .
54.
54. Warren, T.L. and Forrestal, M.J. (1998). Effects of Strain Hardening and Strain-Rate Sensitivity on the Penetration of Aluminum Targets with Spherical-Nosed Rods , International Journal of Solids and Structures, 35: 3737-3753 .
