Estimation of Three-Dimensional Fibre-Orientation Distribution in Short-Fibre Composites by a Two-Section Method

Abstract

The overall fibre orientation in a composite can be statistically characterized by a fibre-orientation distribution. Fibre-orientation studies have concentrated on two major areas: those dealing with continuous fibres and those dealing with short fibres. This paper presents a novel two-section based method for statistical characterization of the fibre- orientation distribution within short-fibre composites. This method produces unbiased distribution data for the near-zero misalignment angles and simultaneously resolves the orientation-duality problem. The method’s novelty lies in its ability to determine accurately (within 1 µ m) the relative positions of two sections. While taking advantage of the extra information provided by the two sections, the proposed method also makes use of the single-section method’s main principles, namely: (1) intersection of a plane and a cylindrical fibre is an ellipse and (2) the ellipse’s shape is a function of fibre’s orientation relative to the intersecting plane. Therefore, by sectioning a specimen, acquiring images of the cross-sectional surfaces, and collecting the fibre-ellipse data from these images, the orientation of every fibre intersecting the sectioning plane can be determined. The probability distribution for fibre orientations within the sectioning plane is then related to that within the specimen volume.

Get full access to this article

View all access options for this article.

References

Bay, R. S. , and Tucker III, C. L. , 1992, “Stereological measurement and error estimates for three-dimensional fibre orientation,” Polymer Engineering and Science, Vol. 32, No. 4, pp. 240-253.

Chin, W. K. , Liu, H. T. and Lee, Y. D. , 1988, “Effects of fibre length and orientation distribution on the elastic modulus of short fibre reinforced thermoplastic,” Polymer Composites, Vol. 9, pp. 27-35.

DeHoff, R. T. and Rhines, F. N. , 1968, Quantitative Microscopy, McGraw-Hill, New York, pp. 129-131.

Fischer, G. and Eyerer, P. , 1988, “Measuring spatial orientation of short fibre reinforced thermoplastics by image analysis,” Polymer Composites, Vol. 9, No. 4, pp. 297-304.

Fu, S. -Y. and Lauke, B. , 1996, “Effects of fibre length and fibre orientation distributions on the tensile strength of short-fibre-reinforced polymers,” Composites Science and Technology, Vol. 56, pp. 1179-1190.

Hine, P. J. , Duckett, R. A. , Davidson, N. and Clarke, A. R. , 1993, “Modelling of the elastic properties of fibre/reinforced composites. I: Orientation measurement,” Composites Science and Technology, Vol. 47, pp. 65-73.

Jain, L. K. and Wetherhold, R. C. , 1992, “Effect of fiber orientation on the fracture toughness of brittle matrix composites,” Acta Metallurgica Materialia, Vol. 40, No. 6, pp. 1135-1143.

Kamal, M. R. , Song, L. and Singh, P. , 1986. “Measurement of fibre and matrix orientations in fibre reinforced composites,” Polymer Composites, Vol. 7, No. 5, pp. 323-329.

Lian, B. , Ladewig, J. , Wille, J. M. and McGrath, J. J. , 1994, “Three-dimensional fibre orientation distributions in injection-molded, short fibre-reinforced thermoplastics,” ANTEC ’94: Proceedings of Society of Plastics Engineers Annual Technical Conference, San Francisco, Vol. II, pp. 2316-2320.

10.

Möginger, B. and Eyerer, P. , 1991, “Determination of the weighting function g(•i, r, vf) for fibre orientation analysis of short fibre-reinforced composites,” Composites, Vol. 22, No. 5, pp. 394-399.

11.

Ranganathan, S. and Advani, S. G. , 1990. “Characterization of orientation clustering in short-fibre composites,” Journal of Polymer Science: Part B-Polymer Physics, Vol. 28, pp. 2651-2672.

12.

Sirkis, J. S. , Cheng, A. , Dasgupta, A. and Pandelidis, I. , 1994, “Image processing based method of predicting stiffness characteristics of short fibre reinforced injection molded parts,” Journal of Composite Materials, Vol. 28, No. 9, pp. 784-799.

13.

Stecenko, T. and Piggott, M. R. 1997, “Fibre waviness and other mesostructures in filament wound materials,” Journal of Reinforced Plastics and Composites, Vol. 16, No. 18, pp. 1659-1674.

14.

Vincent, M. and Agassant, J. F. , 1986, “Experimental study and calculations of short glass fibre orientation in a center gated molded disc,” Polymer Composites, Vol. 7, No. 2, pp. 76-83.

15.

Yurgatis, S. W. , 1987. “Measurement of small angle fibre misalignments in continuous fibre comosites,” Composites Science and Technology, Vol. 30, pp. 279-293.

16.

Zhu, Y. T. , Blumenthal, W. R. and Lowe, T. C. , 1997, “Determination of non-symmetric 3-D fibre- orientation distribution and average fibre length in short-fibre composites,” Journal of Composite Materials, Vol. 31, No. 13, pp. 1287-1301.