Creazzo, J. A., P. L. Bartlett and M. R. Ascough.1988 . "The DuPont Program on Alternative Blowing Agents for Polyurethane Foams-Recent Developments," Proceedings of the SPI 31st Annual Technical/ Marketing Conference, pp. 130-140.
2.
Bartlett, P. L., J. A. Creazzo and H. S. Hammel.1991. "Permeation Studies for Hydrochlorofluorocarbons in Rigid Polyurethane Foams," Improved Thermal Insulation , pp. 289-309.
3.
Government Concentrates.1992. "Faster Phaseout Urged for Ozone-Depleting Compounds," Chemical and Engineering News, 70(8):12.
4.
Rowland, F. S.1989. "Chlorofluorocarbons and the Depletion of Stratospheric Ozone," American Scientist, 77:36-45.
5.
Crank, J. and G. S. Park.1968. Diffusion in Polymers. New York, NY: Academic Press, pp. 68-72.
6.
Weast, R. C., ed. 1980. Handbook of Chemistry and Physics, E-2, 60th Edition. CRC Press.
7.
Brandreth, D. A.1989. "Insulation Foam Aging-A Review of Relevant Physical Phenomena," J. Cellular Plastics, 25:139.
8.
Norton, F. J.1967. "Thermal Conductivity and Life of Polymer Foams," J. Cellular Plastics, 3:23.
9.
Oertel, G.1985. Chapter 6 in Polyurethane Handbook, Hanser Publishers.
10.
Wiedermann, R.1989. "HFA-22—An Alternate Blowing Agent for Rigid PU Foams," 32nd Annual Polyurethane Technical/Marketing Conference, p. 52.
11.
Page, M. C. and L. R. Glicksman.1990. "Measurements of Diffusion Coefficients of Alternate Blowing Agents in Closed Cell Foam Insulation," 33rd Annual Polyurethane Technical/Marketing Conference, pp. 540-546.
12.
Pikulin, S. and D. Bhattacharjee.1989. "Measurement of Blowing Agent Diffusion through Polymer Films," 32nd Annual Polyurethane Technical/ Marketing Conference, 169-177.
13.
Brandreth, D. A. and H. G. Ingersoll.1980. "Accelerated Aging of Rigid Polyurethane Foam," J. Cellular Plastics, pp. 235-238.
14.
Lee, W. M. and C. N. Brown.1983. "Gas Permeability Determination in Urethane Foams," J Thermal Insulation, 6:174-182.
15.
Smits, G. F. and J. A. Thoen.1991. "Fundamental Aspects of Aging and Dimensional Stability of Rigid Polyurethane Foams," The Society of the Plastics Industry of Canada 2nd International Workshop on Long Term Thermal Performance of Cellular Plastics.
16.
Smits, G. F. and J. A. Thoen.1991. "Computer Modelling of Heat Transfer through Rigid Polyurethane Foam," Chapter 8 in Improved Thermal Insulation-Problems and Perspectives, D. A. Brandreth, ed., Lancaster, PA: Technomic Publishing Co., Inc.
17.
ASTM Method.1981. "Oxygen Gas Transmission Rate through Plastic Film and Sheeting Using a Coulombic Sensor," ASTM Method #D-3985.
18.
Shastri, R., H. C. Roehrs, C. N. Brown and S. E. Dollinger.1990. "Permeability of Competitive Oxygen-Barrier Resins," Barrier Polymers and Structures, W. J. Koros, ed., ACS Symposium #423.
19.
Crank, J.1975. The Mathematics of Diffusion, 2nd Ed. Oxford: Clarendon Press.
20.
McBride, J. S., T. A. Massaro and S. L. Cooper.1979. "Diffusion of Gases through Polyurethane Block Polymers ," J. Appl. Poly. Sci., 23:201-214.
21.
Wan, C. C., F. S. Tyler, N. C. Nienhuis and R. W. Bell.1991. " Cell Gas Analysis in Plastic Foams," J. Cellular Plastics , 27:163-175.
22.
Bomberg, M. T., M. K. Kumaran and M. R. Ascough.1991. "Evaluation of Long-Term Thermal Performance of Cellular Plastics Revisited," The Society of the Plastics Industry of Canada 2nd International Workshop on Long-Term Thermal Performance of Cellular Plastics.
23.
Knight, P. M.1984. "Gas Permeability of Various Block Copolyether-Urethanes," J. Membrane Sci., 17:245-254.
24.
Xiao, H., Z. H. Ping, J. W. Xie and T. Y. Yu.1990. "Permeation of Carbon Dioxide through Polyurethane," J. Appl. Pbly. Sci. , 40:1131-1139.
25.
Pegoraro, M., L. Zanderighi, A. Penati, F. Severini, F. Bianchi, N. Cao, R. Sisto and C. Valentini.1991. " Polyurethane Membranes from Polyether and Polyester Diols for Gas Fractionation ," J. Appl. Poly. Sci., 43:687-697.
26.
Stern, S. A. and S. Trohalaki.1990. "Fundamentals of Gas Diffusion in Rubbery and Glassy Polymers," Chapter 2 in Barrier Polymers and Structures , W. J. Koros, ed., ACS Symposium #423.
27.
Barrer, R. M.1968. Diffusion in Polymers, J. Crank and G. S. Park, eds., New York, NY: Academic Press, pp. 165-217.
28.
Stern, S. A. and H. L. Frisch.1981. Ann. Rev. Mater. Sci. , 11:523.
29.
Fedors, R. F.1974. "A Method for Estimating Both Solubility Parameters and Molar Volumes of Liquids," Poly. Eng. Sci., 14(2):147.
30.
Van Krevelen, D. W.1990 . Properties of Polymers- Their Correlation with Chemical Structure, Amsterdam: Elsevier , Chapter 4.
31.
Lee, W. M.1980. "Selection of Barrier Materials from Molecular Structure," Poly. Eng. Sci., 20(1):65-69.
32.
Brandrup, J., E. H. Immergut, eds. 1989. Polymer Handbook, VI, 3rd Edition, John Wiley and Sons, pp. 435-449.