The Importance of Externally Imposed Heat Flux on the Burning Behavior of Materials

Abstract

Get full access to this article

View all access options for this article.

References

H.W. Emmons , "Fire and Fire Protection," Scientific American. Vol. 2 31 (1974), p. 21.

Private Communications from both W. J. Parker, National Bureau of Standards, Washington, D.C. (20234) and E. E. Smith, Chemical Engineering Department, Ohio State University, Columbus, Ohio (43210).

W.J. Parker , and M.E. Long , "Development of a Heat Release Rate Calorimeter at NBS," Ignition, Heat Release and Noncombustibility of Materials, American Society for Testing and Materials, ASTM STP502 (1972), pp. 135-151.

J.A. Perry , "Chemical Engineers' Handbook," 3rd Edition (1950), p. 244.

R.S. Jessup , National Bureau of Standards Monograph No. 7, "Precise Measurements of Heat of Combustion with a Bomb Calorimeter," see also Manual No. 147 Parr Instrument Co., 211 Fifty-third Street, Moline, Illinois 61265.

S.B. Martin , "Characterization of the Stanford Research Institute Large-Scale Heat-Release-Rate-Calorimeter ," Report No. NBS-GCR 76-54 (1975).