Abstract
Get full access to this article
View all access options for this article.
References
1.
"Proposed Initial Federal Motor Vehicle Safety Standards ", Federal Register Vol. 31 , #234 , Part II, 12/3/66.
2.
Wilson, A. D.
and
Musgrove, I.
, et/al, "Trends in Machinery for Foam Production ", Rubber Journal , August 1969 .
3.
Mechlin, G. F.
, "Polyurethane Foams for Shock Mitigation Systems ", Modern Plastics , August 1966 .
4.
"Foam Technology and Application ", National Bureau of Standards Report ORT121, J. of Cellular Plas. , July 1966 .
5.
Wurtz, H.
, "Semi-Rigid Urethane Foams in the Automotive Industry ", J. of Cellular Plas. , November 1966 .
6.
"Properties of Rigid Urethane Foams " Bulletin A-50938, E. I. du Pont de Nemours & Co., Inc.
7.
Woolam, W. E.
, "A Method of Improving the Dynamic Properties of a Plastic Foam Packaging System ", J. of Cellular Plas. , September 1968 .
8.
Woolam, W. E.
, "A Study of the Dynamics of Low Energy Cushioning Materials Using Scale Models ", J. of Cellular Plas. , February 1968 .