An experimental method for the investigation of rigid polyurethane foams in shear

Abstract

Widespread applications of rigid polyurethane and plastic foams lead to shear deformations. Therefore, methods for ensuring shear using experimental investigations are necessary, including the possibility of determining the shear modulus, strength and limit angle. Therefore, a device that allows investigating the shear properties of highly porous plastic foams was developed. The proposed device comprises a clip-on extensometer, commonly exploited in uni-axial compression/tension tests, for the determination of the shear displacement directly on the foams’ sample, on a measurement zone of certain dimensions and location. An innovative construction of the extensometer’s legs is elaborated, permitting to investigate the shear displacement field for different dimensions of the measurement zone. Precision of the device is examined by performing a penetration test on materials of different densities: (a) polyurethane foams and (b) wood. Technology for the production of isotropic polyurethane foams as a test material is described in detail. Experimental determination of shear modulus and strength of one and the same sample, in one and the same experiment is elaborated. Displacements in different zones of sample’s work beam are investigated. Experimental data are compared with the results of mathematical modelling and a good correlation is proved to exist.

Keywords

Rigid polyurethane foams shear displacement axial extensometer measurement zones modulus strength

Get full access to this article

View all access options for this article.

References

Toftengard

Initial fixture design for direct shear testing of sandwich core materials. In: Proceedings of the 27th Risø international symposium on materials science (eds H Lilholt, B Madsen, TL Andersen, et al.), Roskilde, Denmark, Denmark: Riso National Laboratory, 2006, pp. 337–347.

Mines

RAW

Birch

RS.

The crush behaviour of Rohacell-51WF structural foam. Int J Solid Struct 2000; 37: 6321–6341.

Marasco

Cartié

DDR

Partridge

et al . Mechanical properties balance in novel Z-pinned sandwich panels: out-of-plane properties. Compos A 2006; 37: 295–302.

Olsson

Lönnö

Test procedure for foam core materials. In: Proceedings of international conference on sandwich constructions (eds KA Olsson and RP Reichard) UK, EMAS Ltd, 1989, pp. 293–318.

Hilyard

NC.

Mechanics of cellular plastics. New York: MacMillan, 1982.

Renz

Zum Zuegigen und Zyklischen Verfomungsverhalten Polymerer Hartschaumstoffe. Dissertation zur Erlangung des Grades Doktor-Ingenieur, Universität Karlsruhe (TH), 1977, www.kunststoffe.de/ku/overview_search.asp?task=2&navid=20100706928555 (accessed 27 August 2013).

Gnip

Veyelis

Kersulis

et al . Deformability and shear strength of expanded polystyrene (EPS) under short-term loading. Mech Compos Mater 2007; 43: 121–134.

Thompson

McCarthy

Lindgren

Compressive and shear properties of commercially available polyurethane foams. J Biomech Eng 2003; 125: 732–734.

Gdoutos

Daniel

Wang

KA.

Failure of cellular foams under multiaxial loading. Compos A Appl Sci Manufact 2002; 33: 163–176.

10.

Adams

Carlsson

Pipes

RB.

Experimental characterization of advanced composite materials. London: CRC Press LLC, 2003.

11.

Benderly

Putter

Characterization of the shear/compression failure envelope of Rohacell foam. Polym Test 2004; 23: 51–57.

12.

Piskunov

Goryk

Cherednikov

VN.

Modelling of transverse shears of piecewise homogeneous composite bars using an iterative process 1. Construction of model. Mech Compos Mater 2000; 36: 487–500.

13.

Piskunov

Goryk

Cherednikov

VN.

Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads 2. Mech Compos Mater 2000; 36: 743–756.

14.

Stirna

Cabulis

Beverte

Water-blown polyisocyanurate foams from vegetable oil polyols. J Cell Plast 2008; 44: 139–160.

15.

Aleksandrov

Potapov

Derzhavin

BP.

Resistance of materials. Moscow: Visshaja shkola, 1995, (In Russian).

16.

Gibson

Ashby

MF.

Cellular solids: structure and properties. 2nd ed. Cambridge Solid State Science Series. Cambridge, NY: Cambridge University Press, p.510.

17.

Cabulis

Sevastjanova

Andersons

Jānis

et al . Rapeseed oil-based rigid polyisocyanurate foams modified with nanoparticles of various type. Polimery 2014; 59: 201–212.

18.

Lagzdins

Tamuzh

Stiffness tensors of a higher range. Mekhanika Polimerov 1965; 6: 40–48. [Mismatch]

19.

Beverte

Determination of highly porous plastic foams’ structural characteristics by processing LM images data. J Appl Polym Sci 2014; 131: art N39477.

20.

Lagzdins

Zilaucs

Beverte

et al . A refined strut model for calculating the elastic constants of highly porous celluar plastics by the method of orietational averaging. Mech Compos Mater 2011; 47: 1–8.

21.

Lagzdins

Zilaucs

Beverte

et al . Calculating the elastic constants of a highly porous cellular plastics with an oriented structure. Mech Compos Mater 2013; 9: 121–128.

22.

Grenestedt

JL.

Effective elastic behavior of some models for perfect cellular solids. Int J Solid Struct 1999; 6: 1471–1501.

23.

Labans

Kalnins

Bisagni

CH.

Flexural behavior of sandwich panels with cellular wood, plywood stiffener/foam and thermoplastic composite core. J Sandw Struct Mater 2017; 19. DOI: 10.1177/1099636217699587.