Spherical foamable particles were synthesized by suspension polymerization of methyl methacrylate and styrene in the presence of a blowing agent. When the surrounding temperature was high enough to vaporize the blowing agent and soften the polymer shell, the particles were expanded due to pressure difference across the shell. The effects of initiator and crosslinker concentration on the particle size, average molecular weight, and molecular weight distribution of synthesized copolymer, pentane content and expansion properties (density, residual pentane, and dimensional stability of pre-expanded beads) of expandable particles were investigated. The results showed that the expansion behavior of the particles was dependent on molecular weight of the matrix polymer and size of the synthesized particles. In a constant copolymer molecular weight, the pre-expanded bead density decreased with increasing of particle size whereas it increased with molecular weight in a constant particle size. Moreover, the crosslinker improved dimensional stability of the pre-expanded beads.
KiparissidesC. Polymerization reactor modeling: A review of recent developments and future directions. Chem Eng Sci1996; 51: 1637–1637.
2.
Kalfas GA. Experimental studies and mathematical modeling of aqueous suspension polymerization reactors. PhD Thesis, University of Wisconsin, USA, 1992.
3.
KotoulasCKiparissidesC. A generalized population balance model for the prediction of particle size distribution in suspension polymerization reactors. Chem Eng Sci2006; 61: 332–332.
4.
JaliliKAbbasiFNasiriMet al.Preparation and characterization of expandable St/MMA copolymers produced by suspension polymerization. J Cell Plast2009; 45: 197–197.
5.
MehravarEAbbasiFJaliliKet al.Synthesis and expansion characteristics of expandable styrene/methyl methacrylate copolymer beads: The effects of monomer composition and cell structure modifying aid. J Cell Plast2012; 48: 161–161.
6.
Azimi HR and Rezaei M. The determination of n-pentane solubility and diffusivity in styrene–methyl methacrylate copolymers via designed apparatus. J Cell Plast 2016. DOI: p.0021955X16652105.
7.
Sonnenberg F and Schwarz RA. Processes for forming styrenic copolymers. Patent 6497269, USA, 2002.
8.
Sonnenberg F and Miladinov VD. Processes for forming styrene/methyl methacrylate copolymers. Patent 6502621, USA, 2003.
9.
Sonnenberg F, Taristo KM and Johansson TVJ. Treatment for reducing residual carbon in the lost foam process. Patent 6303664, USA, 2001.
10.
HadadiEMehravarEAbbasiFet al.Expandable styrene/methyl methacrylate copolymer: Synthesis and determination of VOCs by combined thermogravimetry/differential thermal analysis-gas chromatography/mass spectrometry. J Appl Polym Sci2012; 124: 4711–4711.
11.
MeadDW. Determination of molecular weight distributions of linear flexible polymers from linear viscoelastic material functions. J Rheol1994; 38: 1797–1797.
ZhuSHamielecAE. Heat effects for free radical polymerization in glass ampoule reactors. Polymer1991; 32: 3021–3021.
16.
O’NeilGAWisnudelMBTorkelsonJM. An evaluation of free volume approaches to describe the gel effect in free radical polymerization. Macromolecules1998; 31: 4537–4537.
17.
Nasiri M. Kinetic study and reactor design of suspension copolymerization of styrene –methyl methacrylate for prepration of expandable copolymer. MSc Thesis, Sahand University of Technology, Iran, 2008.
18.
AzimiHRRezaeiMAbbasiF. Thermo-oxidative degradation of MMA-St copolymer and EPS lost foams: Kinetics study. Thermochem Acta2009; 488: 43–43.
19.
GonçalvesOHStaudtTde AraújoPHHet al.Foaming of poly(methyl methacrylate) particles. Mater Sci Eng2009; 29: 479–479.
20.
Mehravar E. Study on the relationship between microstructure and properties of expandable St/MMA copolymer. MSc Thesis, Sahand University of Technology, Tabriz, 2010.
ScheirsJPriddyDB. Modern styrenic polymers: Polystyrenes and styrenic copolymers, Chichester: Wiley, 2003.
23.
ForsythMMeakinPMacFarlaneDRet al.Free volume and conductivity of plasticized polyether-urethane solid polymer electrolytes. J Phys-Condens Matter1995; 7: 7601–7601.
24.
ChatziEGKiparissidesC. Dynamic simulation of bimodal drop size distributions in low-coalescence batch dispersion systems. Chem Eng Sci1992; 47: 445–445.
25.
MartenFLHamielecAE. High conversion diffusion controlled polymerization in polymerization reactors and processes. ACS Symp Ser1979; 104: 43–43.
26.
Crevecoeur JJ. Water expandable polystyrene (WEPS). PhD Thesis, Eindhoven University of Technology, Netherlands, 1997.
27.
JahanzadFSajjadiSBrooksBW. Comparative study of particle size in suspension polymerization and corresponding monomer-water dispersion. Ind Eng Chem Res2005; 44: 4112–4112.
28.
DowdingPJVincentB. Suspension polymerisation to form polymer beads. Colloid Surf A2000; 161: 259–259.
29.
Van Der Goot AJ. The extruder as a polymerisation reactor for styrene based polymers. PhD Thesis, University of Groningen, Netherlands, 1996.
30.
LoshaekSFoxTG. Cross-linked polymers. I. Factors influencing the efficiency of cross-linking in copolymers of methyl methacrylate and glycol dimethacrylates1. J Am Chem Soc1953; 75: 3544–3544.
31.
JerolimovVJaggerRGMillwardPJ. Effect of cross-linking chain length on glass transition of a dough-moulded poly (methylmethacrylate) resins. Acta Stomatol Croat1994; 28: 3–3.
