Extruded pellets from starch-based materials have been heated and foamed under microwave radiation. The foaming mechanisms and effects of some additives on the dielectric properties of the materials have been investigated using a microwave calorimeter. A rapid increase in dielectric loss factor (ɛ″) has been found for all the tested materials foamable under microwave heating and the onset of the ɛ″ increase is considered to be correlated to glass transition. It has been found that extruded starch materials can be foamed at 15℃/min but the expansion level reduced compared with that of the same material foamed at higher heating rate. The incorporation of organic additives in starch-based materials generally led to significant decrease of their microwave foamability when glycerol and polyvinyl alcohol are used as the additives in the extruded pellets.
Document 399L0031. Council Directive 1999/31/EC of 26th April 1999 on the Landfill of Waste. Official Journal L 16/07/1999, 182: 0001-19, 1999.
2.
Packaging and Packaging Waste Directive (94/62/EEC), 1994.
3.
UK Packaging Regulations. HMSO, UK (SI 1998, no. 1165), 1998.
4.
BaumbergerSLapierreCMontiesB. Preparation and properties of thermally moulded and cast lignosulfonates starch blends. Ind Crop Prod. 6: 253–258.
5.
BhatnagarSHannaMA. Properties of Extruded Starch-based Plastic Foam. Ind Crop Prod1995; 4: 71–77.
6.
ShogrenRLBagleyEB. Natural polymer as advanced materials: some research needs and directions. In: ImamSHGreeneRVZaidiBR (eds). Biopolymers – utilizing nature’s advanced materials, ACS Symposium Series 723. Washington DC: American Chemical Society, 1999, pp. 2–11.
Lacourse NL and Altieri PA. Biodegradable packaging material and the method of preparation thereof. US Patent, 4863655, 1989.
9.
Bastioli C, Bellotti V, Del Tredici G, et al. Biodegradable foamed articles and process for preparation thereof. US Patent, 5801207, 1998.
10.
CinelliPChielliniELawtonJW. Foamed articles based on potato starch, corn fibres and poly(vinyl alcohol). Polym Degrad Stabil2006; 91: 1147–1155.
11.
ShogrenRLLawtonJWDoaneWM. Structure and morphology of baked starch foams. Polymer1998; 39: 6649–6655.
12.
ShogrenRLLawtonJWTiefenbacherKF. Baked starch foams: starch modifications and additives improve process parameters, structure and properties. Ind Crop Prod2002; 16: 69–79.
13.
WillettJLShogrenRL. Processing and properties of extruded starch/polymer foams. Polymer2002; 43: 5935–5947.
14.
Zhou J. Microwave assisted moulding of starch-based foams. PhD thesis, Brunel University, UK, 2004.
15.
ZhouJSongJParkerR. Structure and properties of starch-based foams prepared by microwave heating from extruded pellets. Carbohydr Polym2006; 63: 466–475.
16.
ZhouJSongJParkerR. Microwave-assisted moulding using expandable extruded pellets from wheat flours and starch. Carbohydr Polym2007; 69: 445–454.
17.
Clarke AES, Nesbitt A, Day RJ, et al. Innovative manufacture of olefin foams. Proceedings of the 8th International Conference on Blowing Agents and Foaming Processes, Munich, Germany, 16th–17th May, 2006.
18.
NesbittANavabpourPDegamberB. Development of a microwave calorimeter for simultaneous thermal analysis, infrared spectroscopy and dielectric measurements. Meas Sci Technol2004; 15: 2313–2324.
19.
AltschulerHM. Dielectric constant handbook of microwave measurements, New York: Brooklyn Polytechnic Press, 1963.
20.
JacobJChiaLHLBoeyFYC. Thermal and nonthermal interaction of microwave-radiation with materials. J Mater Sci1995; 30: 5231–5237.
21.
ThostensonETChouTW. Microwave processing: fundamentals and applications. Composites A1999; 30: 1055–1071.
22.
WeiJBShidakerTHawleyMC. Recent progress in microwave processing of polymers and composites. Trends Polym Sci1996; 4: 18–24.
23.
MetaxasACMeredithRJ. Industrial microwave heating, London: Peter Peregrinus Ltd, 1993.
24.
BiliaderisCGPageCMMauriceTT. Thermal characterisation of rice starches – a polymeric approach to phase-transitions of granular starch. J Agric Food Chem1986; 34: 6–14.
25.
OrfordPDParkerRRingSG. Effect of water as a diluent on the glass transition behaviour of malto-oligosaccharides, amylose and amylopectin. Int J Biol Macromol1989; 11: 91–96.
26.
ChenC-MYehA-I. Expansion of rice pellets: examination of glass transition and expansion temperature. J Cereal Sci2000; 32: 137–145.
27.
GuyR. Snack foods. In: GuyR (ed.) Extrusion cooking technologies and application, Cambridge: Woodhead Publishing Ltd. and CRC Press LLC, 2001, pp. 161–181.
28.
KhemaniKC. Polymeric foams: science and technology, Washington DC: American Chemical Society, 1997.
29.
LourdinDCoignardLBizotH. Influence of equilibrium relative humidity and plasticizer concentration on the water content and glass transition of starch materials. Polymer1997; 38: 5401–5406.
30.
LourdinDBizotHColonnaP. “Antiplasticization” in starch-glycerol films?J Appl Polym Sci1997; 63: 1047–1053.
31.
MyllarinenPPartanenRSeppalaJ. Effect of glycerol on behaviour of amylose and amylopectin films. Carbohydr Polym2002; 50: 355–361.
32.
Van SoestJJGKnoorenN. Influence of glycerol and water content on the structure and properties of extruded starch plastic sheets during aging. J Appl Polym Sci1997; 64: 1411–1422.
33.
ShogrenRLLawtonJWTiefenbacherKF. Starch-poly(vinyl alcohol) foamed articles prepared by a baking process. J Appl Polym Sci1998; 68: 2129–2140.
