Correlation between injection moulding processing parameters and mechanical properties of microcellular polycarbonate

Abstract

Since many decades, microcellular foamed materials have been produced basically to reduce the density of the materials in order to get lightweight parts. Meanwhile, it is well known that microcellular foaming by injection moulding offers many more advantages compared to compact injection moulding. Those are, e.g. lower shrinkage and warpage, shorter cycle times, lower clamp forces, reduced viscosity but improved properties of the foamed material in contrast to the compact material. These arguments are all known, but to improve the properties of the material, it is necessary to understand the interrelationship between the morphology and the mechanical properties. Furthermore, it is important to know how the processing parameters influence the morphology and the properties of the produced part. By understanding the relation between processing parameters and the consequential properties, it has become possible to create microcellular foamed parts with exactly defined properties. Through the variation of different processing parameters such as blowing agent concentration, injection velocity, mass temperature, mould temperature, weight reduction and different moulding processes like gas counter pressure injection moulded test, samples were produced to characterise the morphology and the mechanical properties. The experiments were performed with a polycarbonate type from Bayer MaterialScience. The cell size, thickness of the skin layer and distance between the cells were correlated to the processing parameters by means of nonlinear regression equations. Based on these equation, 3D graphs were created by variation of two parameters by fixing the remaining parameters to illustrate the relationships. Furthermore, the relation between the morphology and the mechanical properties was correlated, which makes it possible to produce parts through injection moulding with a well-defined Young’s modulus or flexural strength.

Keywords

Counter gas pressure foam density injection foam moulding physical foaming/blowing agent precision mould opening structural foams surface quality thermoplastic foams unfoams skin layer

Get full access to this article

View all access options for this article.

References

Egger

Fischer

Kirschling

. Versatility for mass production in MuCell injection moulding - a status report (1). Kunststoffe Int 2005; 95(12): 66–70.

Egger

Fischer

Kirschling

. Versatility for mass production in MuCell injection moulding - a status report (2). Kunststoffe Int 2006; 96(1): 72–76.

Kumar

Weller

Hoffer

. Synthesis of microcellular polycarbonate: a phenomenological study of bubble nucleation and growth. In: Proceedings of the symposium on processing of polymers and polymeric composites, ASME winter annual meeting, Dallas, TX, 25–31 November 1990, vol. 19, pp.197–212. New York, NY: American Society of Mechanical Engineers.

Holl

Garbini

Murray

. A steady-state mass balance model of the polycarbonate-CO₂ system reveals a self-regulating cell growth mechanism in the solid-state microcellular process. J Polym Sci Part B Polym Phys 2001; 39(8): 868–880.

Lee

JWS

Wang

Park

. Challenge to extrusion of low-density microcellular polycarbonate foams using supercritical carbon dioxide. Ind Eng Chem Res 2005; 44(1): 92–99.

Kumar

Weller

. Tensile properties of high relative density microcellular PC foams. In: Proceedings of the cellular polymers IV conference, Shrewsbury, England, 5–6 June 1997, p.12.

Bureau

Kumar

. Fracture toughness of high density polycarbonate foams. J Cell Plast 2006; 42(3): 229–240; In: Proceedings of the 63th annual technical conference, ANTEC 2005, Boston, MA, 1–5 May 2005, pp.1832–1836.

Okamoto

. Microcellular processing. München, Wien: Hanser Verlag, 2003.

Bledzki

Kirschling

Steinbichler

. Microcellular moulding with gas counter pressure. In: Proceedings of the 21st annual meeting of the polymer processing society, Leipzig, Germany, 19–23 June 2005.

10.

Bledzki

Kirschling

Pitscheneder

. Polycarbonate microfoams produced by gas counter pressure and precision mould opening. In: Proceedings of the blowing agent and foaming processes 2007, Frankfurt, Germany, 22–23 May 2007.

11.

Bledzki

Kirschling

Steinbichler

. Microcellular moulding with gas counter pressure using physical blowing agent. In: Proceedings of the cellular metals and polymers, Fürth, Germany, 12–14 October 2004.

12.

Rikards

Pedersen

. Elaboration of optimal design models for objects from data of experiments. In: Pedersen

(ed.) Optimal design with advanced materials. London/New York: Elsevier Publishers, 1993, pp. 149–162.

13.

Rikards

Bledzki

Eglajs

. Elaboration of optimal design models for composite materials from data of experiments. Mech Compos Mater 1992; 28(4): 435–445.

14.

Goracy

. Duroplaste mit höheren Gehalten an Partikelrecyklat. PhD Thesis, Institute of Material Technology, University of Kassel, 1997.

15.

Bledzki

Rohleder

Kirschling

. Microcellular polycarbonate with improved notched impact strength produced by injection moulding with physical blowing agent. Cell Polym 2008; 27(6): 327–345.