Sage Journals: Discover world-class research

Abstract

A lot of structural applications benefit from polymer foams and their capabilities of absorbing and dissipating energy. These kinds of materials enjoy very light weights and magnificent capacity for energy absorption. In this paper, a three-dimensional finite element method (FEM) is developed to analyze the behavior of polymer foams. The model is idealized to a level that the microstructure is represented by a regular Kelvin cell. The standard structural software, Abaqus, is used for the finite element analysis. Further on, the numerical model is also validated using the Gibson Model and the experimental results as well. The present work is most importantly aimed at understanding the influence of the cavity size and the density on stress–strain behavior of polypropylene (PP) open cell foam, demonstrated by the absorbed energy by the unit volume (the area under the stress–strain curve) of this material. The optimum foam for each particular application is selected using an energy absorption diagram.

Keywords

polymer foam Kelvin energy absorption diagram stress–strain curve finite element method

Get full access to this article

View all access options for this article.

References

Thomson W. Lord Kelvin. Philosophical Magazine (5th series), 1887, 24: 503–514.

Gibson LJ and Ashby MF. Cellular Solids. 2nd ed. Cambridge: Cambridge University Press, 1997.

Gong

Kyriakides

Jang

. Compressive response of open-cell foams, Part 1 Morphology and elastic properties. Solids Struct 2005; 42: 1355–1358.

Roy

Gao

. Micromechanical modeling of three dimensional open-cell foams using the matrix method for spatial frames. Compos Part A: Eng 2005; 36: 249–253.

Kraynik AM, Neilsen MK, Reinelt DA. Foam micromechanics. In: Sadoc J and Rivier N (eds). Foams and emulsions. Dordrecht: Kluwer, 1999, pp.259–286.

Laroussi

Sab

Alaoui

. Foam mechanics: nonlinear response of an elastic 3D-periodic microstructure. Solid Struct 2002; 39: 3599–3623.

Gong

Kyriakides

Triantafyllidis

. On the stability of Kelvin cell foams under compressive loads. Mech Phys Solids 2005; 53: 771–794.

ABAQUS 6.9. User’s manual Dassault Systems Corp, RI, USA, 2009.

Venkatachalam G. Micro-mechanics of foam unit cell approach. J Instn Engrs-Pt AS 2008; 89: 29–31.

10.

Jhaver

Tippur

. Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite (IPC). Mater Sci Eng 2009; 499: 507–517.

11.

Jang

Kraynik

Kyriakides

. On the microstructure of open-cell foams and its effect on elastic properties. Solid Struct 2008; 45: 1845–1875.

12.

Lee

Park

. Dynamic mechanical characteristics of expanded polypropylene foams. Cellular Plast 2010; 46: 43–55.

13.

Avalle M, Belingardi G and Ibba A. Mechanical models of cellular solids, parameters identification from experimental tests, Dipartimento di Meccanica, Politecnico di Torino Italy Paper Number 05-0438, 2003.

14.

Jhaver R. Compression response and modeling of interpenetrating phase composites and foam-filled honeycombs, Thesis--Auburn University, Alabama, 2009; pp.1–163.

15.

Lorraine

Yu-Hallada

Kuczynski

. Polyurethane: the material of choice for occupant protection and energy management. Cellular Plast 1998; 34: 272–287.

16.

Avalle

Belingardi

Montanini

. Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram. Impact Eng 2001; 25: 455–472.

Using finite element method to analyze the effect of microstructure on energy absorption properties of open cell polymeric foams

Abstract

Keywords

Get full access to this article

References