Filler-matrix interaction in solid-state foaming of composite foams

Abstract

Solid-state foaming is a relatively new process for producing closed-cell thermoset foams starting from powders. In this study, the possibility of introducing nanoclay into epoxy foams by solid-state foaming was investigated. The nanoclay was found to affect the foaming efficiency and the foam density; even if large nanoclay aggregates are present in the foams, for a small range of filler content (2.5—3 wt%), the mechanical properties are positively influenced, as shown by specific compressive toughness which attains a maximum value. Electron microscope observations provided important information on the dependence of the cell size on the filler percentage, and the presence of a critical size (about 5 μm) of nanoclay aggregates, below which they are coherent with the matrix.

Keywords

epoxy foam solid-state foaming thermosets closed-cell foam montmorillonite

Get full access to this article

View all access options for this article.

References

Giannelis EP Polymer layered silicate nanocomposites. Adv Mater 1996; 8: 29-35.

Hussain F. , Hojjati M. , Okamoto M. and Gorga RE Review article: Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 2006; 40: 1511-1575.

Morgan AB and Gilman JW Characterization of polymer-layered silicate (clay) nanocomposites by transmission electron microscopy and X-ray diffraction: a comparative study . J Appl Polym Sci 2003; 87: 1329-1338.

Kornmann X. , Lindberg H. and Berglund LA Synthesis of epoxy-clay nanocomposites: influence of the nature of the clay on structure. Polymer 2001; 42: 1303-1310.

Boukerrou A. , Duchet J. , Fellahi S. , Kaci M. and Sautereau H. Morphology and mechanical and viscoelastic properties of rubbery epoxy/organoclay montmorillonite nanocomposites. J Appl Polym Sci 2007; 103: 3547-3552.

Kaynak C. , Nakas GI and Isitman NA Mechanical properties, flammability and char morphology of epoxy resin/montmorillonite nanocomposites. Appl Clay Sci 2009; 46: 319-324.

Liu W. , Hoa SV and Pugh M. Organoclay-modified high performance epoxy nanocomposites. Compos Sci Technol 2005; 65: 307-316.

Zhou Y. , Pervin F. , Biswas MA , Rangari VK and Jeelani S. Fabrication and characterization of montmorillonite clay-filled SC-15 epoxy . Mater Lett 2006; 60: 869-873.

Ibeh CC and Bubacz M. Current trends in nanocomposite foams. J Cell Plast 2008; 44: 493-515.

10.

Lee LJ , Zeng C. , Cao X. , Han X. , Shen J. and Xu G. Polymer nanocomposite foams. Compos Sci Technol 2005; 65: 2344-2363.

11.

Semenzato S. , Lorenzetti A. , Modesti M. , Ugel E. , Hrelja D. , Besco S. , et al. A novel phosphorus polyurethane FOAM/montmorillonite nanocomposite: preparation, characterization and thermal behavior. Appl Clay Sci 2009; 44: 35-42.

12.

Xu Z. , Tang X. , Gu A. and Fang Z. Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites. J Appl Polym Sci 2007; 106: 439-447.

13.

Harikrishnan G. , Umasankar Patro T. and Khakhar DV Polyurethane foam-clay nanocomposites: nanoclays as cell openers. Ind Eng Chem Res 2006; 45: 7126-7134.

14.

Fabrizio Q. and Squeo EA Solid-state foaming of epoxy resin . J Cell Plast 2008; 44: 161-173.

15.

Murray NGD , Schuh CA and Dunand DC Solid-state foaming of titanium by hydrogen-induced internal stress superplasticity . Script Mater 2003; 49: 879-883.

16.

Murray NGD and Dunand DC Microstructure evolution during solid-state foaming of titanium. Compos Sci Technol 2003; 63: 2311-2316.