Sage Journals: Discover world-class research

Abstract

The shrinkage of low-density polyethylene (LDPE) foam obtained by the extrusion foaming method using isobutene as a blowing agent is suppressed and the dimensional stability is improved by blending with a permeation modifier of stearyl stearamide. To understand the mechanism involved in the modification of the permeability, the gas permeability and the surface structure of LDPE—stearyl stearamide blend films aged for various periods is investigated by using a gas transmission rate tester, scanning electron microscopy (SEM), attenuated total reflectance-infrared spectroscopy (ATR-IR), and grazing incidence X-ray diffraction (GIXD). After aging, a thin layer consisting of distorted particles appears at the surface of the blend film. The amount of stearyl stearamide at the surface increases as the aging time increases. These results suggest that the stearyl stearamide bleeds out to the surface of the film during aging. Gas permeability is suppressed by increasing the amount of stearyl stearamide that bleed out at the surface due to a decrease in solubility, and the permeability of isobutane becomes less than that of air over time. Such modification of permeability improves the dimensional stability of the LDPE foam in the extrusion and post-extrusion aging processes.

Keywords

polyethylene foams blowing agents gas permeability surface aging.

Get full access to this article

View all access options for this article.

References

Watanabe, S. and Matsuki, Y. (1980). U.S. Patent No. 4214054.

Park, C.P. (1987). U.S. Patent No. 4640933.

Bouma, R.H.B. , Nauta, W.J. , Arnauts, J.E.F. , van den Boomgaard , Th. , Steuten, J.M. and Strathmann, H. (1997). Foam Stability Related to Polymer Permeability, J. Appl. Polym. Sci., 65: 2679—2689.

Lee, S.-T. (2000). Foam Extrusion: Principles and Practice, CRC Press, Boca Raton.

Gendron, R. (2004). Thermoplastic Foam Processing: Principles and Development, CRC Press, Boca Raton .

Yang, C.-T. , Lee, K.L. and Lee, S.-T. (2002). Dimensional Stability of LDPE Foams: Modeling and Experiments, J. Cell Plast., 38: 113—128.

Yang, C.-T. and Lee, S.-T. (2003). Dimensional Stability Analysis of Foams Based on LDPE and Ethylene-Styrene Interpolymer Blends, J. Cell Plast., 39: 59—69.

Klempner, D. and Frisch, K.C. (1991). Handbook of Polymeric Foams and Foam Technology , Hanser, New York.

Crank, J. (1975). In: The Mathematics of Diffusion, 2nd edn, Chapter 2, Clarendon Press, Oxford.

10.

Matsuno, S. , Kuba, M. , Nayuki, T. , Soga, S. and Yuen, P.W.T. (2000). Microstructural Characterization of Thin Films and Surfaces by a New Grazing Incident X-Ray Diffractometer. The Rigaku Journal, 17(2): 36—44.

Mechanism of Permeability Modification in Polyethylene Foams

Abstract

Keywords

Get full access to this article

References