Analysis of the Evolution of PIR Foams in the Context of the Phase Out of HCFCs

Abstract

PIR foams are known for their outstanding fire properties and for their good insulation performances. The fire behavior can be attributed to the aromatic structure of the isocyanurate ring and to the nonflammability of the blowing agent that is used nowadays.

For environmental reasons, HCFC-141b will have to be phased out as of 01.01.2003 for the production of PIR laminates boards, in Europe and in the United States.

This evolution represents a challenge for the producers as they need to find a high performance alternative in a relatively short period of time. As a major requirement, this alternative will have to maintain the properties of the PIR foams, notably the fire behavior and the k-value at a high quality level.

Several blowing agent alternatives have been presented, and some of them have already been implemented in production plants.

Among them, pentane is seen as a candidate for economical reasons, but because of its high flammability, its use shows some limitations. The nonflammable alternative HFC-365mfc/HFC-227ea has proven to be an interesting alternative to obtain a good insulation value and good fire properties.

Besides, the existence of azeotropic blends between HFC-365mfc and the pentane isomers increases the degree of freedom of the system and makes the optimization process easier. When using the right combination of blowing agent, it is possible to reach an interesting compromise between the insulation characteristics, the fire performance and the cost of the system.

An analysis of properties of PIR foams produced with the several alternatives will be presented in this paper.

Get full access to this article

View all access options for this article.

References

1. Dournel, P.et al. (2000). HFC-365mfc blends: Status and Development as Blowing Agent for High Performance Insulation Foams . In: Proceedings of the Polyurethanes Conference 2000, p. 171-171 .

2. Dournel, P.et al. (1999). HFC-365mfc: Optimization of Formulations Based on HFC-365mfc and Blends Thereof. In: Proceedings of the Polyurethanes EXPO'99, p. 227-227.

3. Zipfel, L.et al. (1998). HFC-365mfc: A Versatile Blowing Agent for Rigid Polyurethane Foams. In: Proceedings of the Polyurethanes EXPO'98, p. 51-51.

4. Zipfel, L.et al. (1998). The Next Generation Blowing Agent, from a Single Product to a Product Range. In: Proceedings of the Polyurethanes EXPO'98, p. 265-265.

5. Zipfel, L.et al. (1997). HFC-365mfc and HFC-245fa - Progress in Application of New HFC Blowing Agents . In: Proceedings of the Polyurethanes World Congress'97, p. 176-176 .

6. Barthélemy, P.et al. (1996). Progress in the Development of a New HFC Blowing agent - A Closer Analysis. In: Proceedings of the Polyurethanes EXPO'96, p. 404-404.

7. Barthélemy, P.et al. (1995). Latest Results in the Development of Next Generation HFC-Blowing Agents. In: Proceedings of the Polyurethanes Expo 1995, p. 26-26.