Significantly Reduced Catalyst Consumption in Rigid Foams

Abstract

The use of Mannich base initiated polyether polyols for the production of rigid polyurethane foams has been employed for many years. The use of this class of polyols has primarily been directed toward sprayed polyurethane foam applications. The inherent properties of these polyols include aromatic character, increased compatibility and inherent catalytic capabilities. The use of this family of polyols has not widely spread to other rigid foam applications.

During the transition to HCFC-141b as the primary blowing agent for rigid polyurethane foams, increased catalyst levels were required. This introduced additional cost and handling concerns. This paper presents 20 rigid foam formulations which show how the use of a variety of Mannich polyols can reduce catalyst consumption by more than 40% while maintaining compressive strength, flowability and maintaining or improving the insulation properties of the foam (K-factor) and dimensional stability.

Get full access to this article

View all access options for this article.

References

1. McDaniel K.G. and G.P. Speranza, 1983. U.S. Patent 4,383,102.

2. Kennedy, E.E. , C.Y. Lin and D. Bhattacharjee . 1988. "Evaluations of HCFC-123 and HCFC-141b as Potential Blowing Agents for Polyurethane/Polyisocyanurate Rigid Foam Laminate Insulation," Proceedings of the SPI-31st Annual Polyurethane Technical/Marketing Conference, p. 153.

3. Murphy, J. A. and K.G. McDaniel . 1989. "Rigid Foam Modifications for Water Blown Systems," Proceedings of the SPI-32nd Annual Polyurethane Technical/Marketing Conference, p. 321.

4. Bodnar, T.W. J.J. Koch and J.D. Thornsberry . 1991. "New Surfactant Technology for HCFC-123 and HCFC-141b Blown Rigid Foam Systems," Proceedings of the SPI/ISOPA Polyurethanes World Congress, p. 191.

5. Hanak, P. and J. Den Boer . 1989. "The Use of Propoxylated Mannich Adducts for the Production of Continuous Laminates and Fiberglass Reinforced Molded Rigid Foam Characterized by CFC Reduction or Elimination." Proceedings of the SPI-32nd Annual Polyurethane Technical/Marketing Conference, p. 69.

6. Yamato, L.T. , D.E. Schiff , D. Bhattacharjee , D. Dressel , D.E. Galbreath and H.P. McAdams III . 1992. "Novel Spray Foam Polyols with Improved Performance," Proceedings of the SPI-34th Annual Polyurethane Technical/Marketing Conference, October, p. 410.

7. Barthelemy, P.P. and A. Leroy . 1990. "Short-Term and Long-Term Alternatives to the Use of CFC-11 Spray PUR Formulation: Partially Water Blown Formulation Based on Polyol IXOL B251, and Substitution of CFC-11 by HFA-123 of HFA-141b," Proceedings of the SPI-33rd Annual Polyurethane Technical Marketing Conference, p. 432.

8. Moore, S.E. , D. Bhattacharjee , and D. Dressel . 1994. "Flammability Characteristics of CO2 Blown Rigid Polyurethane Spray Foam," Proceedings of the Polyurethane 1994 Conference—Sponsored by the SPI Polyurethane Division, October, p. 418.