A historical review of synchronous machine modelling is categorized by the (i) classical theory; (ii) generalised theory; (iii) circuit representation; (iv) phasor diagram representation; (v) flux linkage form and the (vi) operational network form. Perspective is given in relation to the wide application of modelling.
Get full access to this article
View all access options for this article.
References
1.
LangsdorfA. S., Theory of Alternating-Current Machinery, McGraw-Hill (1955)
2.
ParkR. H., ‘Two reaction theory of synchronous machines — I’, AIEE Trans.48, pp. 716–727 (1929)
3.
KronG., ‘Generalized theory of electrical machinery’, AIEE Trans.49, pp. 666–685 (1930)
4.
HancockN. N., Matrix Analysis of Electrical Machinery, Pergamon (1967)
5.
KuY. H., Transient analysis of rotating machines and stationary networks by means of rotating reference frames', AIEE Trans.70, pp. 943–957 (1951)
6.
LyonW. V., Transient Analysis of A.C. Machinery. An Application of the Method of Symmetrical Components. Chapman and Hall (1954)
7.
FortescueC. L., ‘Method of symmetrical co-ordinates applied to the solution of polyphase networks’, AIEE Trans.37, pp. 1027–1115 (1918)
8.
LinvilleT. M., ‘Starting performance of salient-pole synchronous motors’, AIEE Trans.49, pp. 531–554 (1930)
9.
LiwschitzM. M., ‘Starting performance of salient-pole synchronous motors’, AIEE Trans.50, pp. 913–919 (1931)
10.
ConcordiaC., Synchronous Machines — Theory and Performance. Wiley (1951)
11.
RankinA. W., “The direct- and quadrature-axis equivalent circuits of the synchronous machines”, AIEE Trans.64, pp. 861–868 (1945)
12.
JacksonW. B. and WinchesterR. L., ‘Direct- and quadrature-axis equivalent circuits for solid-rotor turbine generators’, IEEE Trans.PAS-88, pp. 1121–1136 (1969)
13.
YoungC. C., ‘The Synchronous Machines’. IEEE Tutorial Course ‘Modern Concepts of Power System Dynamics’. IEEE Publication 70M62-PWR, IEEE Inc. (1970)
14.
ShackshaftG., ‘General-purpose turbo-alternator model’, IEE Proc.110, pp. 703–717 (1963)
15.
RamshawR. S. and PadiyarK. R., ‘Generalised system model for slipring machines’, IEE Proc.120, pp. 647–658 (1973)
16.
SchultzR. P.JonesW. D. and EwartD. N., ‘Dynamic models of turbine generators derived from solid rotor equivalent circuits’, IEEE Trans.PAS-92, pp. 926–933 (1973)
17.
UmansS. D.MallickJ. A. and WilsonG. L., ‘Modelling of solid rotor turbogenerators, Part I: Theory and techniques’, IEEE Trans.PAS-97, pp. 269–277 (1978)
18.
WatsonW. and ManchurG., ‘Synchronous machine operational impedances from low voltage measurements at the stator terminals’, IEEE Trans.PAS-93, pp. 777–782 (1974)
19.
De MelloF. P. and RibeiroJ. R., ‘Derivation of synchronous machine parameters from tests’, IEEE Trans.PAS-96, pp. 1211–1218 (1977)
