The control of industrial processes is an important theme covered by electrical engineering courses. The implementation of practical activities in laboratories with physical systems and devices complements the theory about control and automation addressed in lectures and enables apprentices to face real situations and problems present in industrial environments. This paper discusses the use of a didactic pilot plant by the students of University of São Paulo in an electrical engineering undergraduate discipline based on the project-based learning approach. The students performed simultaneous experiments with the following control systems: water temperature in the plant, water level in two reservoirs, and water flow rate through the plant, and also monitored the variables of the processes through a supervisory system. The answers of a questionnaire applied to the students after each project and the results registered in technical reports illustrate their performance in the discipline and provide a positive feedback on the use of the industrial plant as a didactic tool.
StankovskiSTarjanLSkrinjarDet al.
Using a didactic manipulator in mechatronics and industrial engineering courses. IEEE Trans Educ2010;
53: 572–579.
2.
Guzman-RamirezEGarcíaIGuerreroEet al.
An educational tool for designing DC motor control systems through FPGA-based experimentation. Int J Electr Eng Educ2015;
52: 22–38.
3.
KokotaskiDMenziesVWigginsA.Project-based learning: A review of the literature. Improv Schools2016;
19: 267–277.
4.
SaveryJR.Overview of problem-based learning: Definitions and distinctions. Interdisc J Prob-Based Learn2006;
1: 9–20.
5.
EfstratiaD.Experiential education through project based learning. Procedia: Soc Behav Sci2014;
152: 1256–1260.
6.
SegundoAKRCocotaJANJrFerreiraDVM. Development of an educational tool for Control Engineering. In: IEEE global engineering education conference (EDUCON), Tallinn, Estonia, 18–20 March 2015, pp. 594–601.
7.
FernandesMAC.Project-based learning applied to an embedded systems course. Int J Electr Eng Educ2017;
54: 223–235.
8.
IşikMF.Design and implementation of a training set for distributed system and mechatronic applications: Project based learning. Teh Vjesn . 2016;
23: 1609–1616.
9.
SosaJIRecanzoneRRArdoliFet al.
Industrial plant at academic level for teaching industrial informatics in an electronic engineering undergraduate degree. IEEE Rev Iberoam Tecnol Aprend2017;
12: 1–9.
10.
DittmarRKahlckeT.Multiple use of an industrial-distributed control system in control engineering education. Comput Appl Eng Educ2011;
21: 313–321.
11.
DominguezMFuertesJJPradaMAet al.
Remote laboratory of a quadruple tank process for learning in control engineering using different industrial controllers. Comput Appl Eng Educ2011;
22: 375–386.
12.
PhilipsKGruszkaBCarrollJet al. Connecting industrial automation software to a discrete manufacturing plant model for research and education. In: IEEE Africon 2013, Pointe-Aux-Piments, Mauritius, 9–12 September 2013, pp. 1–5.
13.
GolobBBratinaB. Web-based monitoring and control of industrial processes used for control education. In: 10th IFAC symposium on advances in control education, Sheffield, UK, 28–30 August 2013, paper no. 99968, pp. 162–167.
14.
HlavaJSulcB. Advanced modelling and control using a laboratory plant with hybrid processes. In: Proceedings of the 17th world congress, Seoul, South Korea, 6–11 July 2008, paper no. 79403, pp. 14636–14641.
15.
HambaliNHalimHFJohariJ. Implementing problem-based learning in process control laboratory for final year electrical engineering undergraduates: Flow control plant. In: IEEE 7th international conference on engineering education, Kanazawa, Japan, 17–18 November 2015, pp. 85–89.
16.
OzerdemOC.Design of two experimental setups for programmable logic controller (PLC) laboratory. Int J Electr Eng Educ2016;
53: 331–340.
17.
PrudenteF.PLC S7-1200 teoria e aplicações: Curso introdutório. 1st ed.
Rio de Janeiro:
LTC, 2014. [Mismatch]
18.
BoltonW.Instrumentation and control systems. 2nd ed.
Waltham, MA:
Elsevier, 2015.
19.
EN 50170:1996. General purpose field communication system.
20.
ReynardSGomis-BellmuntOSudrià-AndreuAet al.
Flexible manufacturing cell SCADA system for educational purposes. Comput Appl Eng Educ2008;
16: 21–30.
21.
SenkIOstojicGJovanovicVet al.
Experiences in developing labs for a supervisory control and data acquisition course for undergraduate mechatronics education. Comput Appl Eng Educ2015;
23: 54–62.
22.
BejanCAIacobMAndreescuGD. SCADA automation system laboratory, elements and applications. In: 7th international symposium on intelligent systems and informatics, Subotica, Serbia, 25–29 September 2009, paper no. 10962204, pp. 181–186.
23.
RooholahiBReddyPL.Concept and application of PID control and implementation of continuous PID controller in Siemens PLCs. Indian J Sci Technol2015;
8: 1–9.
24.
YabanovaITaskinSEkizH.Development of remote monitoring and control system for mechatronics engineering practice: The case of flexible manufacturing system. Int J Electr Eng Educ2015;
52: 264–275.
25.
GeaneyGO’MahonyT.Design and evaluation of a remote PLC laboratory. Int J Electr Eng Educ2016;
53: 212–223.
26.
QiuJWeiYKarimiHRet al.
Reliable control of discrete-time piecewise-affine time-delay systems via output feedback. IEEE Trans Reliab2018;
67: 79–91.
27.
QiuJWangTYinSet al.
Data-based optimal control for networked double-layer industrial processes. IEEE Trans Ind Electron. 2017;
64: 4179–4186.
28.
VásquezREPosadaNLCastrillónF.Development of a multipurpose experimental station for the teaching of process control. Form Univ2015;
8: 25–34.
