Sage Journals: Discover world-class research

Abstract

Capacitive proximity sensors are well-suited for educational projects due to their low cost and simple design. Traditional undergraduate textbooks and lab exercises rarely highlight the fact that the performance of capacitive proximity sensors can be quite sensitive to ground loading. This paper presents a simple classroom demonstration for exploring this topic in detail. The capacitive proximity sensor for this demonstration is a hand-held LCR meter connected to a homemade capacitor composed of two strips of aluminum foil. Students explore the operation of this sensor for two different system ground configurations. In the first case the LCR meter is battery powered (floating ground referenced) and in the second case the LCR meter is powered by AC mains supply (earth ground referenced). When a student positions their hand near the foil strips, the battery-powered sensor measures an increase in capacitance. Conversely, the AC-mains-powered sensor measures a decrease in capacitance. The instructor guides students to discover for themselves the reason for this seemingly puzzling difference by modeling parasitic capacitance and ground loading using simple circuit models.

Keywords

Proximity sensor body capacitance stray capacitance earth ground LCR meter

Get full access to this article

View all access options for this article.

References

Atmel Corporation. ‘Proximity design guide’, Application note: QTAN0087. http://ww1.microchip.com/downloads/en/AppNotes/doc10760.pdf (accessed 2 February 2018).

Davison

Microchip Technology Inc., ‘Techniques for robust touch sensing design’, Application note: AN1334. http://ww1.microchip.com/downloads/en/AppNotes/00001334B.pdf (accessed 2 February 2018).

Liao

Texas Instruments, ‘Ground shifting in capacitive sensing applications’, Application Report: SNOA952, 2016. www.ti.com/lit/an/snoa952/snoa952.pdf (accessed 2 February 2018).

QuintánsMarcos

Pérez

SA.

Developing of low cost capacitive sensors for laboratory classes. In: IEEE EDUCON 2010 conference, Madrid, Spain, 14–16 April 2010, pp. 445–450.

KawaharaHodges

Cook

Zhang

et al . Instant inkjet circuits: Lab-based inkjet printing to support rapid prototyping of UbiComp devices. In: Proceedings of ACM international joint conference on pervasive and ubiquitous computing (UbiComp '13), Zurich, Switzerland, 2013, pp. 363–372. New York: ACM.

ShorterRogers

McGhee

Practical notes on paper circuits. In: Proceedings of 2014 conference on designing interactive systems, Vancouver, BC, Canada, 21–25 June 2014, pp. 483–492. New York: ACM.

Committee on Undergraduate Science Education. Science teaching reconsidered: A handbook. Washington, DC: National Academy Press, 1997, pp. 13–14.

Aliau-Bonet

Pallas-Areny

A fast method to estimate body capacitance to ground at mid frequencies. J Electr Bioimp 2015; 6: 33–36.

DuBroff

Drewniak

JL.

‘Inductance and capacitance’, EMC Experiments and Demonstration Guide, IEEE EMC Society, 2015, pp. 11–18. www.emcs.org/committees/education/pdf/ExperimentsManual.pdf (accessed 2 February 2018).

10.

Keysight Technologies. Impedance measurement handbook: A guide to measurement technology and techniques. 6th ed. Application Note. http://literature.cdn.keysight.com/litweb/pdf/5950-3000.pdf (accessed 2 February 2018).

11.

Schmitt

Electromagnetics explained: A handbook for wireless/RF, EMC, and high-speed electronics. Oxford: Elsevier, 2002.

12.

LiuFeng

Chen

Liu

XJ.

Design of a detection system for projected capacitive touch screen based on PSoC. Int J Simul 2016; 17: 16.1–16.4.

13.

Harrington

RF.

Introduction to electromagnetic engineering. New York: McGraw-Hill, 1958, p. 234.

A simple capacitive proximity sensor experiment for exploring the effects of body capacitance and earth ground

Abstract

Keywords

Get full access to this article

References