Experimental Study of the Influence of Lubrication upon Cold Drawing under Approximately Plane-Strain Conditions at Low Speeds

Golden J. Lancaster P. R. Rowe G. W. ‘Examination of lubrication with soap, using radioactive sodium stearate’, Int. J. appl. Radiation and Isotopes 1958, 4, 30.

Lancaster P. R. Rowe G. W. ‘A comparison of boundary lubricants under light and heavy loads’, Wear 1958–59 2, 428.

National Research Council of U.S.A. International critical tables (McGraw-Hill, New York and London).

Bridgman P. W. The physics of high pressures 1949 (Bell, London).

Butler L. H. ‘Effect of lubricants on growth of plastic contact’, J. Inst. Met. 1960 89 (4), 116.

Butler L. H. ‘Surface conformation of metals under high nominal contact pressure’, Metallurgia, Manchr 1960 61, 167.

Rubert M. P. ‘Confusion in measuring surface roughness’, Engineering, Lond. 1959 188, 393.

Green A. P. Hill R. ‘Calculations of the influence of friction and die geometry in sheet drawing’, J. Mech. Phys. Solids 1952 1, 31.

Hoffman O. Sachs G. Introduction to the theory of plasticity for engineers 1953 (McGraw-Hill, New York and London).

Green A. P. ‘Plane strain theories of drawing’, Proc. Instn meek. Engrs, Lond. 1960 174, 847.

Hill R. Tupper S. J. ‘A new theory of plastic deformation in wire drawing’, J. Iron St. Inst. 1948 159, 353.

Hill R. The mathematical theory of plasticity 1950 (Clarendon Press, Oxford).

Gooding R. W. Lancaster P. R. Rowe G. W. 1959 unpublished.

Wistreich J. G. ‘The fundamentals of wire drawing’, Metallurg. Revs 1958 3 (10), 97.

Tabor D. The hardness of metals 1951 (Oxford University Press, London).

Watts A. B. Ford H. ‘On the basic yield stress curve for a metal’, Proc. Instn mech. Engrs, Lond. 1955 169, 1141.

Blazynski T. Z. Cole I. M. ‘An investigation of the plug drawing process’, ibid. 1960 174, 797.