HernandezP R‘A new Ion Sensitive FET Technology with back contacts using deep diffusion’, Technical Digest of the Fifth International Meeting on Chemical Sensors, Pontificia Studiorum Universita, Rome, Italy, 11–14 July 1994, Volume 1, p.263.
2.
KrauseSMoritzWGrohmannI, ‘Improved long-term stability for LaF3 based oxygen sensor’, Proc. Eurosensors VII, 1993, Budapest, Hungary, Sens and Act. B18 (1993), p.148.
3.
GraciaI, ‘On-line determination of the degradation of Ion Sensitive FET Chemical Sensors’, Sensors and Actuators, B15–16, 1993.
TerryS, ‘A miniature silicon accelerometer with built-in damping’, Tech. Dig. of IEEE Solid State Sensor and Actuator Workshop, Hilton Head Island, SC1990, p.44.
6.
NobleR, ‘A new direction in orientation’, Electronic World, Jan 1996, p.40.
Computer Applications in Biotechnology, CAB 95, edited by MurackASchugerlK, DECHEMA, 1995.
9.
SchugerlK‘Challenges in integrating biosensors and FIA for on-line monitoring and control’, a review paper, Trends in Biotechnology (TIBTECH), Vol. 14, No. 1, Jan. 1996, p.21.
10.
Vaezi-NejadSMDhillonPS, ‘Hydrogenaged amorphous silicon photorecetors’, Sensors Technology, Systems and Applications, Ed. GrattanKTV, Institute of Physics Publishing Ltd, 1991, p439.
11.
See the Proceedings of the IEEE Special Issue on Laser Radar, Vol. 84, No.2, Feb 1996.
12.
Vaezi-NejadSMAmarasingheAC, ‘Photoreceptors and their applications’, see p. 1209 of ref 1.
13.
MeijerG C MVan HerwaardenA W, Thermal Sensors, Adam Hilger, Bristol, 1994.
14.
SharmaN RCareyW PYeeS S, ‘Integrated electrochemical microelectrode sensor array for gas and liquid detection’, Technical Digest of the Fifth International Meeting on Chem. Sensors, vol. 2, p. 114a, Rome, Italy, 1994.
15.
KimuraM‘Application of the air bridge microheater to gas detection’, Vol.2, Technical Digest of the 5th International Meeting on Chemical Sensors, Rome, Italy, 1994, p. 1164.
16.
See papers in the Measurement and Control, vol. 29, No. 1, Feb 1996 (eg. WalshP T, p.5, Van Ewyk R, p.13 and Persaud K C, et al, p.17).
17.
HuffakerR MHardestyR M, ‘Remote sensing of atmospheric wind velocities using solid state and CO2 coherent laser systems’, Proceedings of the IEEE, vol. 84, No. 2, Feb 1996, p. 181.
18.
ChaY YGweonD G, ‘Local path planning of a free ranging mobile robot using the directional weighting method’, Mechatronics, vol. 6, No. 1, Feb 1996, p.53.
19.
S'MiejaFBeyerU W ERichterG, ‘Adaptive control of a robot arm using driver programs’, Artificial Intelligence in Engineering, vol. 10, No. 1, Jan 1996, p.39.
20.
DoddsGCaoBHamiltonK, ‘Multi-arm robotics: A solution to faster re-configuration for changing automated tasks’, Industrial Robot, vol. 23, No. 1, 1996, p.22.
21.
ErdmannM, ‘Understanding action and sensing by designing action based sensors’, Int. J. Robotics Research, vol. 14, No. 5, Oct 1995, p.483.
22.
MehdianMVaezi-NejadS M, ‘A novel tactile sensor for weld inspection’, Second International Conference on Concurrent Engineering and Electronic Automation (CEEED 94), March 1994, Poole, UK.
23.
See papers presented at the International Symposium on Robotics and Manufacturing, Maui, USA, 15–17 August 1994.
24.
BardC‘Achieving dexterous grasping by integrating planning and vision-based sensing’, Int. J. Robotics Researchvol. 14, Oct 1995, p.445.
25.
See Proceedings of the IEEE Second CAD-based Vision Workshop, 1994 (eg. see p.124).
26.
MehdianMVaezi-NejadSM, ‘Optical tactile sensor for robots’, Int. J. Electronics, vol. 76, No. 5, 1994.
27.
MoseleyP T, ‘New trends and future prospects of thick and thin-film gas sensors’, Sensors and Actuators B, vol. 3, 1991, p.167.
28.
See selected papers from the Proceedings of Euro Sensors VII, Budapest, Hungary, Sept. 26–29, 1993.
29.
RohY HLeeB H, ‘Thick film zinc oxide gas sensor for control of lean air/flow ratio in combustion systems’, Technical Digest, Volume of the Fifth International Meeting on Chem. Sensors, Rome, Italy, 1994, p.792.
30.
See the Proceedings of the 7th Int. Conf. on Automotive Electronics, London, IMechE, 1989, ISBN 0852986971 (eg. p.105, p.93, p.79).
SusukiS‘Semiconductor capacitive-type accelerometers’, SAE Technical paper 910274, 1991.
33.
MacdonaldG A, ‘A review of low cost accelerometers for vehicle dynamics’, Sensors and Actuators, A21–23, 1990, p.303.
34.
HazeldenR J, ‘Application of an optical torque sensor to a vehicle power steering system’, Proc. IEE Coll. C12, 1992/107, May 1992.
35.
TurnerJ D, ‘The development of a thick-film non-contact shaft torque sensor for automotive applications’, J. Phys. E. Sci. Instrum., vol. 22, 1989, p.82.
36.
ArmitageA F, ‘Eurosensors IX: The sensors of the future?’, Measurement & Control, Vol. 29, March 1996, p.46.
37.
See the papers presented at the International Seminar on ‘Optical methods and data processing in heat and fluid flow’, organised by IMechE, in collaboration with the European Association for Laser Anemometry, City University, London, UK 18–19 April 1996.
38.
VincentP S, ‘The design of a temperature transmitter’, Measurement & Control, Vol. 27, Oct 1994, p.255.
39.
Vaezi-NejadS MJuhaszC, ‘Investigation of electrical properties of high-resistivity materials for solid state sensors’, Sensors and Actuators B, Vol. 24–25, 1995, p.894.
LeonardMilt‘Micromachining technologies promise smarter sensors; actuators for a broad range of applications’, Electronic Design, Dec 4, 1995.
44.
Optical Sensors Collaborative Association (OSCA), Newsletter, Feb 1995, p.2.
45.
Vaezi-NejadS M, ‘Inspection of materials for advanced sensors’, IEE Colloquium Digest No. 1995/232, Dec 1995, p. 14/1 to p. 14/6.
46.
Vaezi-NejadS M, ‘Primary investigation of anodised aluminium as a substrate for Hybrid Microelectronics; I-Electrical and Mechanical properties’, Int. J. Electronics, Vol. 68, No. 1, 1990, p.59.
47.
Vaezi-NejadS M, ‘Primary investigation of anodised aluminium as a substrate for Hybrid Microelectronics, II-Behaviour of thick film circuit components’, Int. J. Electronics, Vol. 69, No. 4, 1990, p.519.
48.
HutchesonG DHutchesonJ D, ‘Technology and economics in the semiconductor industry’, Scientific America, June 1996, p.40.
49.
Vaezi-NejadS M, ‘Characterisation of solid state amorphous semiconductor photo-receptors’, 4th Sensors and their applications conference, University of Kent at Canterbury, 25–27 Sept 1989, Kent, UK.
50.
Wen-JengH O, ‘Highly uniform monolithic IX 12 array of InGaAs photodiodes’, Electronic Letters, Vol. 32, No. 1, 4 Jan 1996, p.61.
51.
WashioSKanamitsuMYoshidaA, ‘Measurement of thermodynamic quantities of mineral oil by laser interferometry’, Proc. Instn. Mech Engrs, Vol. 208, No. C4, 1994, p.267.
52.
MaccraithB D, ‘Development of a LED-based fibre optic oxygen sensor using a sol-gel derived coating’, Proc SPIE1994, 2293, p.110.
53.
ThompsonR BLakowiczJ R, ‘Fibre-optic PH sensor based on phase fluorescence lifetimes’, Anal. Chem., Vol. 65, 1993, p.853.
54.
BrascheUSonntagP, ‘Intelligent Sensors: Technology, Applications and European Markets’, VDE-Verlag GmbH, Berlin, Germany1989.
55.
See ‘Requirements and market opportunities for advanced sensors in transport’, a report for DTI on advanced sensor programme by Quo-Tec Ltd, Technology, Evaluation and Innovation, East House, Chiltern Avenue, Amersham, Bucks., Nov 1990.
56.
OwenV M, ‘Market requirements and opportunities for advanced sensors in the health care sector’, a report for the DTI by Sci Tec., Nov 1992.
57.
BogueRPartners, ‘The role of advanced sensors in environmental monitoring and pollution control practices’, a report on a study commissioned by the DTI, Nov 1991.
58.
BogueR WPartners, ‘A review of UK publicly funded research and development on advanced sensors’, report on a study carried out for the DTI, Nov 1989.
59.
KotreC J, ‘Subsurface electrical impedance imaging using orthogonal linear electrode arrays’, IEE Proceedings Science, Measurement and Technology, Vol. 143, No. 1, June 1996, p.41.
See papers presented at the IEE Colloquium on ‘Advance in electrical tomography’, Weston Building, Manchester Conference Centre, UMIST, Manchester, 19 June 1996.