Process Tomography in the Oil Industry — State of the Art and Future Possibilities

Zimmerman L.J. Chen S.T. (1992) Geophysical Methods for Reservoir Characterization, Society of Petroleum Engineers, SPE 23593, 241–250.

Wilt M.J. Alumbaugh D.L. Morrison H.F. Becker A. Lee K.H. Deszcz-Pan M. (1995) Crosswell electromagnetic tomography: System design considerations and field results, Geophysics, 60, No. £, 871–885.

Nekut A.G. (1995) Crosswell electromagnetic tomography in steel-cased wells, Geophysics, 60, No. 3, 912–920.

Vinegar H.J. Wellington S.L. (1987) Tomographic imaging of three-phase flow experiments, Rev. Sci. Instrum., 58, No. 1, 96–107.

Hunt P.K. Engler P. Bajsarowicz C. (1998) Computed Tomography as a Core Analysis Tool: Applications, Instrument Evaluation, and Image Improvement Techniques, Journ. Petr. Tech. SPE 16952, 1203–1210.

Hove A.O. Nielsen V. Leknes J. (1990) Visualization of Xanthan Flood Behaviour in Core Samples by Means of X-ray Tomography, SPE Reservoir Engineering, SPE 17342, 475–480.

Coles M.E. Muegge E.L. Sprunt E.S. (1991) Application of CAT Scanning for the Oil and Gas Production research, IEEE Trans. Nucl. Sci., 38, No. 2, 510–515.

Flannery B.P. Deckman B.P. Roberge W.G. D'Amico K.L. (1987) Three-Dimensional X-ray Microtomography, Science, 237, 1439–1444.

Ursin J.R. (1992) Detection of fluid saturations in porous media using gamma-ray tomography, Journ. Petrol. Sci. Eng., 7, 297–308.

Brown G.O. Stone M.L. Gazin J.E. (1993) Accuracy of gamma-ray computerized tomography in porous-media, Water Resources Research, 29, No. 2, 479–486.

Chen S. Fangfang Q. Kyung-Hoe K. Watson T (1993) NMR Imaging of Multiphase Flow in Porous Media, AIChE Journal, 39, No. 6, 925–934.

Binley A. Shaw B. Poulter Henry S. (1986) Flow pathways in porous media: Electrical resistance tomography and dye staining image verification, Meas. Sci. Technol., 7, 384–390.

Soucemarianadin A. Bourlion M. Lenormand R. (1989) Ultrasonic Saturation Mapping in Porous Media, SPE Reservoir Engineering, SPE 16953, 194–200.

Van Landeghem F. Nevicato D. Pitault I. Forissier M. Turlier P. Derouin C. Bernard J. R. (1996) Fluid catalytic cracking: Modelling of an industrial riser, Appl. Catalyst A:Gen., 138., 381–405.

Vitanen P. I. (1993) Determination of Catalyst Density Profile on the Regenerator and the Riser Reactor of a Fluidized Catalyst Cracking Plant, Appl. Radiat. Isot., 44, No.4, 773–777.

Yates J. G. Simons J. R. (1994) Experimental Methods in Fluidization Research, Int. J. Multiphase Flow, 20, Suppl., 297–330.

Wang S. J. Dyakowski T. Geldart D. Beck M. S. (1997) Application of Electrical Capacitance Tomography to Flow Modelling within a Circulating Fluidized Bed, Proc. Frontiers in Industrial Process Tomography II, Delft, April 9–12, 33–38.

Martin M. P. Turlier P. Bernard J. R. (1992) Gas and solid behaviour in cracking circulating fluidized beds, Powder technol., 70, 249–258.

Wirth K.-E Schiewe T. (1997) Characterizing a vertical gas-solid flow by means of gamma-absorption tomography. Proc. Frontiers in Industrial Process Tomography II, Delft, April 9–12, 315–318.

Yang W. Q. Stott A. L. Beck M. S. Xie C. G. (1995), Development of capacitance tomographic imaging systems for oil pipeline measurements, Rev. Sci. Instrum., 66, No. 8, 4326–4332.

Johansen G. A. Frøystein T. Hjertaker B. T. Olsen Ø. (1996) A dual sensor flow imaging tomographic system, Meas, Sci. Technol., 7, No. 3, 297–307.

Kumar S. B. Moslemian D. Dudukovic M. P. (1995) A g-ray tomographic scanner for imaging voidage distribution in two-phase flow systems, Flow Meas. Instrum., 6, No. 1, 61–73.

Xie C. G. Huang S. M. Hoyle B. S. Thorn R. Lenn C. Snowden D. Beck M. S. (1992) Electrical capacitance tomography for flow imaging: System model for development of image reconstruction algorithms and design of primary sensors, IEE Proc. -G, 139, No. 1, 89–98.

Isaken Ø. (1996) A review of reconstruction techniques for capacitance tomography, Meas. Sci. Technol., 7, 325–337.

Mwanbela A. J. Isaken Ø. Johansen G. A. (1997) The Use of Entropic Thresholding Methods in Reconstruction of Capacitance Tomography Data, Chem. Eng. Sci., In press.

Isaken Ø. Dico A. S. Hammer E. A. (1994) A Capacitance based Tomography System for Interface Measurement in Separation Vessels, Meas. Sci. Technol., 5, No. 10, 1262–1271.

Frøysten T. Vallestad A. Johansen G. A. (1995) The application of gamma tomography to interface level measurement in gravity separators, Presented at ‘Frontiers in industrial process tomography’ in San Luis Obispo, Oct. 29 — Nov. 2 1995.

Gibbs S. J. Hall L. D. (1996) What roles are there for magnetic resonance imaging in process tomography?, Meas. Sci. Technol., 7, 827–837.

Schlaberg H. I. Yang M. Hoyle B. (1996) Real-time ultrasonic process tomography for two-component flows, Electronics Letter, 32, No. 17, 1571–1572.

Hammer E. A. Cimpan E. Tollefson J. (1997) The importance in calculating the permittivity and conductivity in two component mixtures for image reconstruction, Proc. ‘Frontiers in Industrial Process Tomography II’ in Delft, April 8 — 12 1997.

McKee S. L. Abdullah M. Z. Dickin F. J. Mann R. Brinkel J. Ying P. Boxman A. McGrath G. (1994) Measurement of concentration profiles and mixing kinetics in stirred tanks using a resistace tomography technique, Mixing, 8, IChemE Symposium Series No. 136, IChemE, Rugby, 9–16.

Thorn R. Johansen G. A. Hammer E. A. (1997) Recent Developments in Three-Phase Flow Measurement, Meas. Sci. Technol., In press.

Hammer E. A. (1996) Has the development of new sensor systems for multiphase flow measurement, sand monitoring and acoustic fiscal metering been successful? Key note speech at KAPOF conference and New Products Workshop — Flow Monitoring Systems, Stavager, Norway, March 13–15 1996.

Editorial (1997) World's first isolated tri-lateral well in Bokor field Scandinavian oil-gas Magazine 1/2–97, 26.

Førre G. Jakkestad J. Fallet T. (1994) HTASIC — et hett tema, Elecktronikk, 4.