BinnigGSmithD P E (1986) Single-tube three-dimensional scanner for scanning tunnelling microscopy, Rev. Sci. Instrum., 57, 1688–1689.
2.
BowenD K (1990a) Sub-nanometre displacements calibration using X-ray interferometry, Meas. Sci. Technol., 1, 107–119.
3.
BowenD K (1990b) Sub-nanometre transducer characterization by X-ray interferometry, Precision Engineering, 12, 165–171.
4.
ChetwyndD GSmithS T (1990) Strength degradation of ground and etched Si surfaces, Int. Conf. on New Materials and Their Applications, Warwick, 493–495. IOP Publishing: Bristol.
5.
GarrattJ DBottomleyS C (1990) Technology transfer in the development of a nanotopographic instrument, Nanotechnology, 1, 38–43.
6.
HicksT R (1984) The application of capacitance micrometry to the control of Fabry-Perot etalons, J. Phys. E: Sci. Instrum., 17, 49–55.
7.
JonesR V (1962) Some uses of elasticity in instrument design, J. Sci. Instrum.39, 193–203.
8.
LindseyK (1988) Sub–nanometre surface texture and profile measurement with Nanosurf 2, Ann. CIRP, 37, 519–522.
9.
LiuXSmithS T (1990) A linear profilometer for surface proximity probe applications, 2nd Science University of Tokyo & University of Warwick Joint Seminar on Nanotechnology, Warwick, August 1990.
10.
SmithS TChetwyndD G (1990) An optimized magnet-coil force actuator and its application to precision elastic mechanisms, Proc. Instn. Mech. Engrs., 204, 243–253.
11.
SmithS T (1987) Design and assessment of monolithic high precision translation mechanisms, J. Phys. E: Sci. Instrum., 20, 977–983.
12.
SmithS T (1988) The design of a novel, high stability, combined scanning tunnelling microscope and X-ray interferometer, 1st Science University of Tokyo & University of Warwick Joint Seminar on Nanotechnology, Tokyo, Sept. 1988.
