Mechanical Design of Instruments

Beggs J. S. 1955. Mechanism, McGraw-Hill, New York.

Braddick H. J. J. 1954. Mechanical design of laboratory apparatus, Chapman and Hall, London (1st edition − 1954).

Burstall A. F. 1970. A history of mechanical engineering, Faber and Faber, London.

Doughtie V. L. 1966. Elements of mechanism, Wiley, London.

Drysdale C. V. Jolley A. C. 1924. Electrical measuring instruments — Part 1 Commercial and indicating instruments, Ernest Benn, London.

Faires V. M. 1955. Design of machine elements, Macmillan Co., New York (1st Edition 1934).

Ferguson E. S. 1962. ‘Kinematics of mechanisms from the time of Watt’, United States National Museum Bulletin 228, Paper 27, p 185–230. Smithsonian Institution, Washington DC.

Fremery J. K. Doden K. 1978. ‘Active permanent magnetic suspensions for scientific instruments’, J Phys E: Sci Instrum, 11 (2), 106–113.

Geary P. J. 1955. Knife edge bearings, Sira Institute, Chislehurst.

Geary P. J. 1961. Instrument ball bearings, Sira Institute, Chislehurst.

Geary P. J. 1962. Fluid film bearings, Sira Institute, Chislehurst.

Geary P. J. 1964. Magnetic and electric suspensions, Sira Institute, Chislehurst.

Harris T. A. 1966. Roller bearings analysis, Wiley, New York.

Jeffery G. J. Sydenham P. H. 1973. ‘Stability of strain-meter mounts’, Geophys J R Astr Soc, 32 (2), 185–193.

Lent D. 1970. Analysis and design of mechanisms, Prentice-Hall, Englewood Cliffs.

Mabie H. H. Ocvirk F. W. 1958. Mechanisms and dynamics of machinery, Wiley, New York (3rd Edition − 1975).

Merrit H. E. 1975. Gear engineering, Wiley, New York.

Michalec C. W. 1966. Precision gearing: theory and practice, Wiley, New York.

Neubert H. K. P. 1975. Instrument transducers — an introduction to their performance and design, Clarendon Press, Oxford.

Peatfield A. E. 1951. Engineering components and materials, EUP, London.

Pollard A. F. C. 1929. The kinematical design of couplings in instrument mechanisms, Adam Hilger, London.

Gear Reliance . 1972. Catalogue RG5, Reliance Gear Co Ltd, Huddersfield. (Also similar catalogues by PIC Design Corp, New York).

Rothbart H. A. 1956. Cams: design, dynamics and accuracy, Wiley, New York.

Shields J. 1976. Adhesive Handbook, Newnes-Butterworth, London.

Sydenham P. H. 1968. ‘Linear and angular transducers for positional control in the decametre range’, Proc IEE, 115, 1056–1066.

Sydenham P. H. 1969. Manual and automatic large-scale dimensional metrology, PhD thesis, University of Warwick.

Sydenham P. H. 1974. ‘2000 hr comparison of 10 m quartz-tube and quartz-catenary tidal strainmeters’, Geophys J R astr Soc, 38, 377–387.

Sydenham P. H. 1979. Measuring instruments — tools of knowledge and control, Peter Peregrinus, London.

Sydenham P. H. Brankwijk J. F. 1966. ‘Production of radial line gratings using a mechanical photographic apparatus’, J Sci Instrum, 43, 380–382.

Timoshenko S. MacCullough G. H. 1959. Elements of strength of materials, Van Nostrand, New Jersey. (Numerous editions and printings exist since the 1st in 1935).

Trylinski W. 1971. Fine mechanisms and precision instruments — principles of design, Pergamon Press, Oxford, translated by A. Voellnagel from Polish original.

Turner G. L'E. 1973. Van Marum's scientific instruments in Teyler's Museum — Descriptive catalogue, Noordhoff Int Pub, Leyden.

Zimmerman J. R. 1962. Elementary kinematics of mechanism, Wiley, London.