Mechanical Design of Instruments

Abdullah F. 1977. The application of mathematical models in the evaluation and design of electromechanical instrument transducers. J Appl Sci Eng, A, 3–26.

Antill J. M. 1974. Civil engineering management, Angus and Robertson, Sydney. (see Engineering contracts).

Atkinson P. 1972. ‘Computer-aided design of closed-loop control systems’, Computer Aided Design, April, 120–128.

Beggs J. S. 1955. Mechanism, McGraw-Hill, New York.

Bell Howell . 1974. The Bell and Howell pressure transducer handbook, CEC/Instruments Div, Pasadena.

Bosman D. 1978. ‘Systematic design of instrumentation system’, J Phys E: Sci Instrum, 11, 97–105.

Braddick H. J. J. 1954. The physics of experimental method, Chapman and Hall, London.

Breuer M. A. Friedman A. D. 1977. Diagnosis and reliable design of digital systems, Pitman, London.

Burstall A. F. 1970. A history of mechanical engineering. Faber and Faber, London.

CAMA. 1974. A guide to the procurement of complex electronic control and supervisory systems, The Control and Automation Manufacturers Assoc, London.

Cambridge Instrument Co. 1945. ‘50 years of scientific instrument manufacture’, Engineering, 159, 361–363; 401–403; 461–463; 501–502.

Doebelin E. O. 1966. Measurement systems: application and design, McGraw-Hill Book Co, New York.

Faires V. M. 1955. Design of machine elements. Macmillan, New York.

Finkelstein L. 1977. ‘Instrument science — introductory article’, J Phys E: Sci Instrum, 10, 566–572.

Finkelstein L. Watts R. D. 1978. ‘Mathematical models of instruments — fundamental principles’ J Phys E: Sci Instrum, 11, 841–855.

Fitzgerald A. E. Kingsley G. Jr. 1961. Electric machinery — the dynamics and statics of electromechanical energy conversion, McGraw-Hill, New York.

Foxboro 1972. Process control instrumentation. Pub 10SE, Foxboro-Yoxall, Surrey.

Gilmore H. L. (1969) Integrated product testing and evaluation; a system approach to improved reliability and quality, Wiley, New York.

Glazebrook R. 1922. A dictionary of applied physics, 5 Vols, Macmillan, London.

Hahn G. J. Shapiro S. S. 1967. Statistical models in engineering, Wiley, New York.

Hugill A. L. 1978a. ‘Synthesis of inductive displacement measuring system using computer-aided design’, Proc IEE, 125, (5), 417–421.

Hugill A. L. 1978b. Gravimeter design, Internal Report DSS/AH/171, Systems Science Dept, The City University, London, September.

IMEKO. 1980 Bibliography of books published on measurement science and technology — with emphasis on the physical sciences, IMEKO, Higher Education Committee.

Koenig H. E. Blackwell W. A. 1961 Electromechanical systems theory, McGraw-Hill, New York.

Lent D. 1970. Analysis and design of mechanisms, Prentice Hall, Englewood Cliffs.

Mabie H. H. Ocvirk F. W. 1958. Mechanisms and dynamics of machinery, Wiley, New York.

Moss C. 1978. ‘Quality of precision measurement equipment’, NCSL Newsletter, 18, (1), 23–24.

Olson H. F. 1943. Dynamical analogies, Van Nostrand, New York.

Rolt F. H. 1929. Gauges and fine measurement, 2 Vols, Macmillan, London.

Rothwell E. 1966. ‘The characteristics of the printed matter’, Control, 10, (93), 136–139.

Shearer J. L. Murphy A. T. Richardson H. H. 1971. Introduction to system dynamics, Addison-Wesley Pub Co, Reading.

Sidall J. N. 1972. Analytical decision making in engineering design, Prentice-Hall, New Jersey.

Simpson A. 1976. Testing methods and reliability (electronics), MacMillan, London.

Stein P. K. 1971. ‘The concept of a system ‘operating surface’ as a fundamental system characteristic’ IEEE Trans-IM, November, 183–191.

Strong J. 1938. Modem physical laboratory practice, Blackie and Son, Glasgow.

Sydenham P. H. 1969. Manual and automatic large-scale metrology, PhD Thesis, University of Warwick, England.

Sydenham P. H. 1972. ‘Microdisplacement transducers’ J Phys E: Sci Instrum, 5, 721–733.

Sydenham P. H. 1979a. The systematic design of measuring systems, Proc Engineering Measurement Systems Conf, ACIS, Wellington, New Zealand, May.

Sydenham P. H. 1979b. (Editor) Handbook of measurement-science fundamentals, John Wiley, Chichester. (In preparation).

West J. C. Leonard J. L. 1955. ‘The necessary torque requirements for a servo-motor’, Jnl Phys E: Sci Instrum, 32, 30–32.

Wheeldon R. 1974. Specifications — the identifying facts and Generalised approach to selection and design (of instruments) , in Stathmology — the integrated approach to measurement, instrumentation and control, Department of Continuing Education, University of New England, Australia.

Whitehead T. N. 1934. Instruments and accurate mechanisms — underlying principles. Macmillan, London (Also Dover Pubs, New York, 1954).

Wiener Ul. E. 1976. The value of measuring information, determination possibilities, application of management analyses of measuring systems, IMEKO VII Congress, paper CTH/303, May, London, IMEKO Secretariat, Budapest.