The Relationship between Transient and Steady State Performance Criteria for Control Systems

Hall A. C. ‘The Analysis and Synthesis of Linear Servomechanisms’, The Technology Press, Mass Inst Tech, Cambridge, Mass, 1943.

Westcott J. H. ‘The minimum-moment-of-error-squared criterion: a new performance criterion for servomechanisms’, Proc IEE, 1954, Vol 101, Pt 2, pp 471–480.

Graham D. Lathrop R. C. ‘The synthesis of optimum transient response: criteria and standard forms’, Trans AIEE, 1953, Vol 72, pp 273–288.

Lathrop R. C. Graham D. ‘The transient performance of servomechanisms with derivative and integral control’, Trans AIEE, 1954, Vol 73, Pt 2, pp 10–17.

Graham D. Lathrop R. C. ‘The influence of time scale and gain on criteria for servomechanism performance’, Trans AIEE, 1954, Vol 73, Pt 2, pp 153–158.

Newton G. C. Jr. Gould L. A. Kaiser J. F. ‘Analytical Design of Linear Feedback Controls’, John Wiley & Sons Inc, New York, 1957.

Nims P. T. ‘Some design criteria for automatic controls’, Trans AIEE, 1951, Vol 70, Pt 1, pp 606–611.

Fickeisen F. C. Stout T. M. ‘Analogue methods for optimum servomechanism design’, Trans AIEE, 1952, Vol 71, Pt 2, pp 244–250.

Caldwell R. R. Rideout V. C. ‘A differential analyser study of certain nonlinearity damped servomechanisms’, Trans AIEE, 1953, Vol 72, Pt 2, pp 165–169.

Oldenbourg R. C. Sartorious H. ‘A uniform approach to the optimum adjustment of control loops’, Trans ASME, 1954, pp. 1265–1279.

Schultz W. C. Rideout V. C. ‘The selection and use of servo performance criteria’, Trans AIEE, 1958, Vol 76, Pt 2, pp 383–388.

Schultz W. C. Rideout V. C. ‘A general criterion for servo performance’, Proc Nat Elec Conf, 1957, Vol 13, pp 549–560.

Gibson J. E. ‘How to specify the performance of closed loop systems’, Control Engineering, 1956, Vol 13, pp 122–129.

Schultz W. C. Rideout V. C. ‘Control system performance measures: past, present and future’, IRE Trans on Automatic Control, 1961, pp. 22–35.