Slurry Flow Velocity,Concentration and Particle Size Measurement Using Flow Noise and Correlation Techniques

Abstract

Three areas of slurry pipe flow measurement using flow noise and correlation techniques are described. Signals generated by the natural turbulence inherent in the flow of two-component fluids can be used to enable the total volume flow rate, concentration and particle size of the discontinuous component to be measured.

Total volume flow is measured by a cross correlation method which involves obtaining the time of flight of a tagging signal due to the turbulence between two transducers spaced axially along the direction of flow. Both ultrasonic and conductivity transducers are used to detect the flow turbulence. Results show that a measurement accuracy within ±2% can be achieved in all systems tested. The intensity of the flow noise detected by a simple transducer is related to the quantity of the discontinuous component present in the flow. This flow noise is measured by an AC method and gives direct indication of the concentration of the discontinuous component. Turbulent flow consists of eddies which have characteristic size ranges. The motion of particles in a turbulent flow field is a function of the particle size and shape, and the density of the particles and of the fluid. A measure of the eddy size based on the spectral analysis of the flow noise can be used to give an indication of the mean particle size.

Get full access to this article

View all access options for this article.

References

Abeysekera

S A

Beck

M S

. ‘Liquid flow measurement by cross correlation of temperature fluctuations’, Symflo '72, Institute of Measurement and Control, Measurement and Control (Transaction) Vol 5, No 11, 1972.

Abeysekera

S A

. ‘Fluid measurement using correlation techniques’, PhD Thesis, University of Bradford, 1971.

Beck

M S

. ‘Power and fluid flow measuring using correlation techniques’, PhD Thesis, University of Bradford, 1969.

Beck

M S

Calvert

Lee

K T

Wormald

C N

. ‘New flow measurement techniques’, Het Ingenieursblad, Journal A, Vol XV, No 2, 1974 (in English).

Beck

M S

Hobson

J H

. ‘Electrostatic charge measurement of particulate materials being transported at high velocity’, Power Technology Conference, University of Lancaster, 1970.

King

P W

Hewitt

P T

. ‘Monitoring of electrostatic charge transported by pipe flowing dielectrics using intrinsic electrical noise signals’, 142nd Meeting of Electrochemical Society, October, 1972.

Lee

K T

. ‘Liquid and slurry flow measurement using correlation techniques’, PhD Thesis, University of Bradford, 1972.

Calvert

Lee

K T

Ong

K H

. ‘Experiments in correlation flowmetering’, Proceedings of International Symposium, Measurement and Process Identification by Correlation and Spectral Techniques, 2–5 January, 1973. Institute of Measurement and Control.

Wormald

C N

Beck

M S

Briggs

Cornish

‘Sludge solids concentration and velocity flow measurement using electrical noise techniques’, IAWPR Conference, London. October, 1973.

10.

Cunliffe

J M

Williams

J I

. ‘Measurement of paper stock consistency by electrical methods (as ref 8).

11.

Lee

K T

Beck

M S

McKeown

K J

. ‘An on-line instrument for measuring small quantities of dispersed non-conducting liquid in a conducting liquid’.

12.

Hayes

A M

Musgrave

‘Correlator design for flow measurement’, Radio and Electronic Engineering, Vol 43, No 6, June, 1973.

13.

Beck

M S

Jordan

J R

Kelly

K G

. ‘Cross correlation flow measurement using a microelectronic hard-wired programmed digital computer’, IEE Conference on the Use of Digital Computers in Measurement, York, Sept, 1973.

14.

Ong

K H

. ‘Hydraulic flow measurement using ultrasonic transducers and correlation techniques’, PhD Thesis, University of Bradford, 1974.

15.

Ong

K H

. ‘Measurement of photographic emulsion flow using correlation and flow noise techniques’, University of Bradford, Internal Report, 1974.