In this paper, a detailed dryer section audit was conducted on a paper machine to evaluate its energy performance. The methodology and instruments used for field measurements are introduced as an important part of dryer audit. The deficiency points which limit drying performance of the paper machine are identified based on the tested data. It was found that significant energy savings can be achieved in the studied paper machine.
References
1.
HillK.C., Paper drying, in Pulp and paper manufacture, 3rd ed., Volume 7, Paper machine operations, BenjaminA. T.KocurekM.J., Editors; TAPPI: Atlanta, 1991. 282–305.
2.
MujumdarA.S., Handbook of industrial drying, 3rd ed.; CRC Press: New York, 2006.
3.
YaroslavC.AleksanderK.LesterS., Laboratory Development of a High Capacity Gas-Fired Paper Dryer, Gas Technology Institute — Energy Utilization Center, Des Plaines, IL. Available at, 2004.
4.
EtemogluA.B.CanM.AvcinodotA.PulatE., Theoretical study of combined heat and mass transfer process during paper drying. Heat and Mass Transfer2005, 41(5), 419–427.
5.
MartinssonJ., Energy optimization of paper drying at Munksjö Paper. Department of Chemical Engineering, Lund Institute of Technology, Lund, Sweden, 2005, Master Thesis Thesis..
6.
HillK.C., Five rules for energy efficiency to improve dryer operations. Pulp and Paper2006, 80(9), 52–57.
7.
ReeseD., Low-cost dryer update opportunities offer efficiency gains, energy savings. Pulp and Paper2005, 79(3), 54–58.
8.
WedelG.L., Opportunities for Energy Conservation in Paper Drying. In 2006 TAPPI Papermaker's Conference, Atlanta, Georgia: Kadant Johnson Inc. April 24–28, 2006.
9.
ChalouxJ.Save energy in the dryer section. Paper360° April/May 2009, 20–23.
10.
LangI., Effect of the dryer fabric on energy consumption in the drying section. Pulp and Paper Canada2009, 110(5/6), 33–37.
11.
LaurijssenJ.De GramF.J.WorrellE.FaaijA., Optimizing the energy efficiency of conventional multi-cylinder dryers in the paper industry. Energy2010, 35(9), 3738–3750.
12.
PaltakariJ.T.KarlssonM.A.TimofeevO.N., Effect of blow boxes on evaporation during cylinder contact in a paper machine dryer section. Drying Technology1997, 15(6), 1857–1867.
13.
MaggardJ., On-line measurement of dryer performance. TAPPI1995, 78(3), 264–265.
14.
SundqvistH., Dryer section ventilation and heat recovery, in Papermaking Part 2, Drying, KarlssonM., Ed.; Fapet Oy: Helsinki, 2000. 1–26.
15.
TAPPI, Dryer section performance monitoring, TIP 0404–33, 2003.
16.
AsanoK., Mass transfer-From fundamentals to modern industrial applications; WILEY-VCH Verlag GmbH & Co. KGaA: Weinheim, 2006.
17.
BREF-Paper. European Commission, JRC-IPTS IPPC Draft Reference Documents on Best Available Techniques in the Pulp and Paper Industry, Brussels, 2010.
