AdamM.S.YangW.Q.WarsonR. (1998) A capacitance tomographic system for void fraction measurement in transient cavitation, J. Hydraulic Research, 36, 707–719
2.
AlmeK.J.MylvaganamS. (2006) Artificial neural networks for direct parameter estimation in electrical capacitance tomography, Proc. 4th Int. Symposium on Process Tomography, Warsaw, Poland, 14–15 Sept., 12–15
3.
BukhariS.F.A.YangW.Q. (2004) Tomographic imaging technique for oil separator control, Proc. 3rd Int. Symposium on Process Tomography, Lodz, Poland, 9–10 Sept., 27–31
4.
BukhariS.F.A.IsmailI.YangW.Q. (2005) Visualising oil separator vessel and decision-making for control, Proc. of 4th World Congress on Industrial Process Tomography, Aizu, Japan, 5–8 Sept., 855–860
5.
BukhariS.F.A.YangW.Q. (2006) Multi-interface level sensors and new development in monitoring and control of oil separators, Sensor, 6, 380–389
6.
CominosP.MunroN. (2002) PID controllers: Recent tuning methods and design to specification, IEE Proc.- Control Theory Appl., 149, 46–53
GiarratanoJ.C.RileyG. (2005) Expert systems, principles and programming, International Thomson Publishing
9.
GrudzienK.RomanowskiA.AykroydR.G.WilliamsR.A. (2005) A novel approach to pneumatic conveying monitoring and control strategy development, Proc. 4th World Congress on Industrial Process Tomography, Aizu, Japan, 5–8 Sept., 886–891
10.
HahnJ.EdgarT.F. (2004) Process Control Systems, University of Texas Austin
11.
HammerE.A.JohansenG.A. (1997) Process tomography in the oil industry: State of the art and future possibilities, Measurement + Control, 30, 212–216
12.
HolstadM.B.JohansenG.A.JacksonP.EidsnesK.S. (2005) Scattered gamma radiation utilized for level measurements in gravitational separators, IEEE Sensors J., 5(2), 175–182
13.
HuangS.M.GreenR.G.PlaskowskiA.BeckM.S. (1998) A high frequency stray-immune capacitance transducer based on the charge transfer principle, IEEE Trans. Instrum. Meas.37 (3), 368–373
14.
Isaksenø. (1996) A review of reconstruction techniques for capacitance tomography, Meas Sci. Technol., 7, 325–337
15.
LeesR.P. (2005) Increase oil production and reduce chemical usage through separator level measurement by density profiling
16.
LoserT.WajmanR.MewesD. (2001) Electrical capacitance tomography: Image reconstruction along electrical field lines, Meas. Sci. Technol., 12, 1083–1091
17.
LowA. (1991) Introductory computer vision and image processing, McGraw-Hill Book Company (UK) Ltd
18.
MurrillP.W. (1991) Fundamentals of process control theory, Instrument Society of America
19.
NeufferD.AlvarezA.OwensD.H.OstrowskiK.L.LukeS.P.WilliamsR.A. (1999) Control of pneumatic conveying using ECT, Proc. 1st World Congress on Industrial Process Tomography, Buxton, UK, 14–17 April, 71–76
20.
OgataK. (2002) Modern control engineering, Prentice Hall
21.
ParrA. (1998) Industrial control handbook, Industrial Press Inc., Madison Avenue, New York
22.
WilliamsR.A.BeckM.S. (1995) Process Tomography — Principles, Techniques and Applications, Butterworth-Heinemann
23.
WishartD. (1998) Efficient hierarchical cluster analysis for data mining and knowledge discovery, Computing Science and Statistics, 30, 257–263
24.
YangW.Q.BeckM.S.ByarsM. (1995) Electrical capacitance tomography — from design to applications, Measurement + Control, 28, 261–266
YangW.Q. (2006) Sensors and instrumentation for monitoring and control of multi-phase separation, Measurement + Control, 39(6), 178–184
29.
YorkT.A. (2001) Status of elctrical tomography in industrial applications, J. of Electronic Imaging, 10, 608–619
30.
ZouL.ZhangY.YaoD.PengL.ZhangB. (2001) Using principal component analysis to measure two-phase flow concentration, Proc. 2nd World Congress on Industrial Process Tomography, Hannover, Germany, 29–31 Aug., 35–40
