Sensors and Instrumentation for Monitoring and Control of Multi-Phase Separation

Akhneifer AEM (1999), Development of a multi-interface level measurement system, MSc dissertation, Dept. of Electrical Engineering and Electronics, UMIST.

Asran A (1998), Development of a multi-interface level measurement system using a segmented capacitance sensor, MSc dissertation, Dept. of Electrical Engineering and Electronics, UMIST.

Beck M S Waterfall R C Williams R A Yang W Q Chen Y W Banner A Brant M R (1994), Interface measurements in three-phase separators, Final report of project PI5 “Design and instrumentation of primary separation systems, Phase I”, Process Tomography Group, UMIST.

Brant M R Yang W Q Wang H X Chen Y W Xie C G Hoyle B S Lenn C P Beck M S (1993), Interface measurement in three phase separators and pipelines, IBC Conference on developments in production separation systems, London.

Bukhari S F A Yang W Q (2004), Tomographic imaging technique for oil separator control, Proc. of 3rd Int. Symp. on Process Tomography in Poland, 9–10 Sept., Lodz, Poland, pp 27–31.

Bukhari S F A Yang W Q (2005), New trends in multi-interface level sensors for monitoring oil separators, Proc. of 3rd Int. Symp. on Sensor Science, 18–21 July Juelich, Germany, pp 179–184.

Chondronasios A Yang W Q Nguyen V T (2001), Impedance-analyser-based tomography system, Proc. of 2nd World Congress on Industrial Process Tomography 29–31 Aug., Hannover, Germany, pp 573–579.

Christian Michelsen Research AS (2005), Ultrasonic interface level detector, http://www.cmr.no/avd10/ned-lasting/Brosjyre_UID.pdf.

Darwood M James K Jackson P Hewitt P (2003). Density profiling in multiphase systems using Gamma ray absorption, Proc. of 3rd World Congress on Industrial Process Tomography, 2–5 Sept., Banff, Canada, pp 870–875.

Dyakowski T Hale J M Jaworski A White N M Nowakowski A Meng G Rwifa S (2005), Dual-modality probe for characterization of heterogeneous mixtures, IEEE Sensors Journal, 5 (2), pp 134–138.

Endress+Hauser (2005), Rod probes 11500 Z, 11500 ZM, http://ww.endress.com/eh/products/en/home.nsf/contentview.

Enraf-Nonius BV (1988), Level gauging system for service stations user manual..

Hjertaker B T Johansen G A Jackson P (2001), Recent developments in hydrocarbon separator interface imaging, Proc. of SPIE, 4188, pp 81–92.

Holstad M B Johansen G A Jackson P Eidsnes K S (2003), Scattered Gammar radiation utilized for level measurements in gravitational separators, Proc. of 3rd World Congress on Industrial Process Tomography, 2–5 Sept., Banff, Canada, pp 181–186.

Isaksen Ø Nordtvedt J E (1992), A new reconstruction algorithm for process tomography, Meas. Sci. Technol., 4, pp 1464–1475.

Isaksen Ø Dico AS Hammer E A (1994), A capacitance based tomography system for interface measurement in separation vessels, Meas. Sci. Technol., 5, pp 1262–1271.

Jaworski A J Dyakowski T Davies G A (1999a), A portable capacitance probe for detection of interface levels in multi-phase flows — A case study, Proc. of 1st World Congress on Industrial Process Tomography, 14–17 April, Buxton, UK, pp 289–296.

Jaworski AJ Dyakowski T Davies G A (1999b), A capacitance probe for interface detection in oil and gas extraction plant, Meas. Sci. Technol., 10, pp L15–L20.

Jaworski A J Dyakowski T (2005), Measurements of oil-water separation dynamics in primary separation systems using distributed capacitance sensors, Flow Measurement and Instrumentation, 16 (2–3), pp 113–127.

Lees R P (2005), Increase oil production and reduce chemical usage through separator level measurement by density profiling, http://www.isa.org/journals/intech/ETCON2046.pdf.

Meng G Jaworski A J Dyakowski T Hale J M White N M (2005), Design and testing of a thick-film dual-modality sensor for composition measurements in heterogeneous mixtures, Meas. Sci. Technol., 16 (4), pp 942–954.

Merpro (2005), Separation TORE SEP and AZGAZ?, http://www.merpro.com/PRNFrontend/upload/tpltmain1a.asp?page=2100002151.

Schüller R B Solbakken T Engebretsen B Halleraker M (2001), Water concentrations and interface positions by single electrode capacitance probes, Proc. of 2nd World Congress on Industrial Process Tomography, 29–31 Aug., Hannover, Germany, pp 644–651.

Shell International Research (1984), Level Gauge, European Patent Application No. 84201889.7.

Shi T M Xie C G Huang S M Williams R A Beck M S (1991), Capacitance-based instrumentation for multi-interface level measurement, Meas. Sci. Technol., 2, pp 923–933.

Syed T (2004), 2D/3D magnetic arrays for imaging, MSc dissertation, Dept. of Electrical Engineering and Electronics, UMIST.

Tracerco (2005), Specialist measurement instruments -Tracerco Profiler, http://www.tracerco.com/products-specialistinstruments-profiler.htm.

Wang H X Yin W L Yang W Q Beck M S (1996), Optimum design of segmented capacitance sensing array for multi-phase interface measurement, Meas. Sci. Technol., 7, pp 79–86.

Wang H X Yin W L (1997), A study of the detection mechanism and the reconstruction algorithm for multi-phase interface level measurement, Meas. Sci. Technol., 8, pp 1289–1294.

Yang W Q Brant M R Beck M S (1994), A multi-interface level measurement system using a segmented capacitance transducer for oil separators, Meas. Sci. Technol., 5 (9), pp 1177–1180.

Yang W Q (2001), Multi-interface liquid level testing system, Chinese Patent, CN2443351U.