Improved Performance of Motor-Drive Systems by SAW Shaft Torque Feedback

Lonsdale A. , “Dynamic rotary torque measurement using surface acoustic waves,” Sensors, Vol. 18, no. 10, Oct. 2001, pp. 51–56.

Hori Y. Sawada H. Chun Y. , “Slow resonance ratio control for vibration suppression and disturbance rejection in torsional system,” IEEE Trans. Ind. Elect., Vol. 46, No. 1, February 1999, pp. 162–8.

Yuki K. Murakami T. Ohnishi K. , “Vibration control of 2-mass resonant system by resonance ratio control,” International Conference on Industrial Electronics, Control, and Instrumentation (IECON 1993), Vol. 3, 15–19 Nov. 1993, pp. 2009–14.

Mortimoto S. Hamamoto A. Takeda Y. , “Vibration control of two-mass system with low inertia ratio considering practical use,” Electrical Engineering in Japan, Vol. 125, No. 2, 1998, pp. 1–9.

Schofield N. O'Sullivan T. Bingham CM Lonsdale A. : ‘Improved performance of motor-drive systems by saw shaft torque feedback’, web ref.: www.sawtransducer.com/journal.doc.

Jerems F. Proft M. Rachui D. Kalinin V. , “A new generation non-torsion bar torque sensors for electromechanical power steering applications”, Proc. Int. Congress on Electronic Systems for Vehicles, Baden Baden, September, 2001, pp. 27–28.

Schmidt F. Scholl G. , “Wireless SAW identification and sensor systems”, in Advances in Surface Acoustic Wave Technology, Systems and Applications, vol. 2, Ruppel C. C. W. Fjeldly T. A. Eds. Singapore: World Scientific, 2001, pp. 277–325.

Pohl A. Seifert F. , “Wirelessly interrogable surface acoustic wave sensors for vehicular applications”, IEEE Trans. Instrum. Meas., vol. 46, 1997, pp. 1031–1038.

Gullen D.E. Reeder T.M. “Measurement of SAW velocity versus strain for YX and ST quartz”, Proc. Ultrason. Symp., 1975, pp. 519–522.

Lonsdale A. Lonsdale B. “Method and apparatus for measuring strain”, Int. patent public. No. WO 91/13832, 19 Sept. 1991, Int. Applic. No. PCT/GB91/00328, Int. filing date: 4 March 1991, Priority: 9004822.4, 3 March 1990, GB.

Merewood P. , “A novel ZnO/Si thin-film SAW torque measurement microsystem”, Int. Forum on Wave Electron. and Its Applications, St.-Petersburg, 14–18 Sept., 2000.

Wolff U. Schmidt F. Scholl G. Magory V. , “Radio Accessible SAW sensors for non-contact measurement of torque and temperature”, Proc. IEEE Ultrason. Symp., 1996, pp. 359–362.

Grossmann R. Michel J. Sachs T. Schrufer E. , “Measurement of mechanical quantities using quartz sensors”, Proc. Europ. Freq. Time Forum, 5–7 March, 1996, pp. 376–381.

Euteback T. Pacas J. M. , “Damping of torsional vibrations in high-dynamic-drives,” 8th European Conference on Power Electronics and Applications (EPE1999), CD-ROM, Brussels, Belgium, 1999, pp. 10.

Menne M. Bitsche O. , “Comparison of drivetrain oscillation damping-algorithms for electric vehicles,” Electric Vehicle Symposium (EVS 18), Berlin, 2001.

Solbodan N.V. Stojic M.R. , “Suppression of torsional oscillations in a high performance speed servo drive,” IEEE Trans. Ind. Elect., Vol. 45, No. 1, Feb. 1998.

O'Sullivan T.M. Schofield N. Bingham CM , “Simulation and experimental validation of induction machines dynamics driving multi-inertia loads,” Journal of Applied Electromagnetics and Mechanics (JAEM), Vol. 19, (2003).

Franklin G. Powell D. Emami-Naeini A. , “Feedback Control of Dynamic Systems”, Book, Prentice-Hall, ISBN: 0-13-032393-4, 2002.