Mems Force and Torque Sensors/A Review

Elwenspoek M. Wiegerink R. , Mechanical Microsensors, Berlin, Germany: Springer, 2001, pp. 97–106.

Sharpe W. N. , “Mechanical Properties of MEMS Materials”. In The MEMS Handbook, pp. 3.6–3.16, Gad-El-Hak M. (Ed), Boca Raton, FL, USA: CRC Press, 2002.

Biagiotti L Gavesi M. Melchiorri C. Ricco B. , “A New Stress Sensor for Force/Torque Measurements,” Proc. IEEE Int. Conf. on Robotics and Automation, Vol. 2, Washington DC, USA, 11–15 May 2002, pp. 1655–1660.

Gass V. van der Schoot B. H. Jeanneret S. de Rooij N.F. , “Micro-Torque Sensor Based on Differential Force Measurement,” Proc. IEEE Workshop on Micro Electro Mechanical Systems, Oiso, Japan, 25–28 Jan. 1994, pp 241–244.

Whitehead N. Jones B.E. Rees D. , “Non-Contact Torque Measurement on a Rotating Shaft Incorporating a Mechanical Resonator,” In Sensors and Their Applications X, p17–22, White N.M. Augousti AT (Eds), Bristol, England: Institute of Physics Publishing, 1999.

Yan T. Jones B.E. Rakowski R.T. Tudor M.J. Beeby S.P. White N.M. , “Thick-Film PZT-Metallic Triple Beam Resonator,” Electronics Letters vol. 39, No. 13, 2003, pp. 982–983.

Roessig T. Pisano A.P. Howe R.T. , “Surface-Micromachined Resonant Force Sensor,” Proc. ASME International Mechanical Engineering Congress and Exposition, Part 2 (of 2), San Francisco, CA, USA, 12–17 Nov 1995, ASME Dyn Syst Control Div Publ DSC, Vol. 57, No. 2, 1995, pp. 871–876.

Despont M. Racine G.A. Renaud P. de Rooij N.F. , “New Design of Micromachined Capacitive Force Sensor,” J. Micromech. Microeng. vol. 3, No. 4, 1993, pp. 239–242.

Haueis M. Dual J. Cavalloni C. Gnielka M. Buser R. , “Packaged Bulk Micromachined Resonant Force Sensor for High Temperature Applications,” Conf. Design, Test, Integration, and Packaging of MEMS/MOEMS, Paris, France, 9–11 May 2000, SPIE, Vol. 4019, 2000, pp. 379–388.

Londsdale A. , “Dynamic Rotary Torque Measurement Using Surface Acoustic Waves” Sensors Express vol. 18, No. 10, 2001, pp. 51–55.

Pohl A. Ostermayer G. Seifert F. , “Wireless Sensing Using Oscillator Circuits Locked to Remote High-Q SAW Resonators,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 45, No. 5, 1998, pp. 1161–1168.

Mörbe M. von Hörsten C. , “Force and Torque Sensors.” In Sensors for Automotive Technology, pp. 450–462, Marek J. Trah H.-P. Suzuki Y. Yokomori I. (Eds), Weinheim, Germany: Wiley-VCH Verlag GmbH, 2003.

Hazelden R.J. , “Optical Torque Sensor for Automotive Steering Systems,” Sensors and Actuators A, Vol. 37–38, 1993, pp. 193–197.

Spooncer R.C. Heger R. Jones B.E. , “Non-Contacting Torque Measurement by a Modified Moiré Fringe Method,” Sensors and Actuators A vol. 31, No. 1–3, 1992, pp. 178–181.

Meckes A. Aigner R. Dorfinger G. Wachutka G. , “Capacitive Silicon Microsensor for Force and Torque Measurement,” Proc. TRANSDUCERS ‘01 — Eurosensors XV, Munich, Germany, 10–14 June 2001, pp. 498–501.

Cermak S. Wandling F. Zdiarsky W. Fulmek P. Brasseur G. , “Capacitive Sensor for Torque Measurement”. Proc. Int'l Measurement Confederation XVI IMEKO World Congress, Vol III, Vienna, Austria, 25–28 Sept. 2000, pp. 25–28.

Wiegerink R. Zwijze R. Krijnen G. Lammerink T. Elwenspoek M. , “Quasi-Monolithic Silicon Load Cell for Loads up to 1000 kg with Insensitivity to Non-Homogeneous Load Distributions,” Proc. 12th IEEE Int. Conf. Micro Electro Mechanical Systems, Orlando, FL, USA, 17–21 Jan. 1999, pp. 558–563.

Romback P. Langheinrich W. , “An Integrated Sensor Head in Silicon for Contactless Detection of Torque and Force,” Sensors and Actuators A vol. 42, No. 1–3, 1994, pp. 410–416.

Brugger J. Despont M. Rossel C. Rothuizen H. Vettiger P. Wellemin M. , “Microfabricated Ultrasensitive Piezoresistive Cantilevers for Torque Magnetometry,” Sensors and Actuators vol. 73, No. 3, 1999, pp. 235–242.

Brook A.J. Bending S.J. Pinto J. Oral A. Ritchie D. Beere H. Springthorpe A. Henini M. , “Micromachined III-V Cantilevers for AFM-Tracking Scanning Hall Probe Microscopy,” J. Micromech. Microeng, Vol 13, No. 1, 2003, pp. 124–128.

Lee D.W. Despont M. Drechsler U Gerber C. Vettiger P. Wetzel A. Bennewitz R. Meyer E. , “Switchable Cantilever Fabrication for a Novel Time-of-Flight Scanning Force Microscope,” Microelectric Engineering, Vol. 67–68, 2003, pp. 635–643.

Dargahi J. Parameswaran M. Payandeh S. , “A Micromachined Piezoelectric Tactile Sensor for an Endoscopic Grasper — Theory, Fabrication and Experiments,” J. of Microelectromechanical Systems vol. 9, No. 3, 2000, pp. 329–335.

Engel J. Chen J. Liu C. , “Development of Polyamide Flexible Tactile Sensor Skin,” J. Micromech. Microeng vol. 13, No. 3, 2003, pp. 359–366.

Lomas T. Tuantranont A. Cheevasuvit F. , “Micromachined Piezoresistive Tactile Sensor Array Fabricated by Bulk-Etched Mumps Process,” Proc. IEEE Int. Symp. Circuits and Systems, Bangkok, Thailand, 25–28 May 2003, pp. 856–859.

Lyshevski S.E. , “Distributed Control of MEMS-Based Smart Flight Surfaces”, Proc. American Control Conf., Arlington, VA, USA, 25–27 June 2001, pp. 2351–2356.

Svedin N. Stemme E. Stemme G. , “A Static Turbine Flow Meter with a Micromachined Silicon Torque Sensor,” Proc. 14th IEEE Conf. Micro Electro Mechanical Systems, Interlaken, Switzerland, 21–25 Jan. 2001, pp. 208–211.

McKenzie J.S. Hale K.F. Jones B.E. , “Optical Actuators.” In Advances in Actuators, pp. 82–111, Dorey A.P. Moore J.H. (Eds), Bristol: Institute of Physics Publishing, 1995.