“Internal and Environmental Audits of the Industrial and Transportation Operations Can Identify Areas That Need Improved Control Management”, from the book “Toxic Chemicals, Health and the Environment”, edited by LaveL. B.UptonA. C., Baltimore, MD: Johns Hopkins University Press, 1987.
2.
U.S. EPA, “Spill Prevention, Control, and Countermeasure Practices at Small Petroleum Facilities”, EPA 600/7–80/004, January 1980.
3.
U.S. EPA, “National Emission Standards for Hazardous Air Pollutants; Benzene Waste Operations”, 40CFR61, Subpart FF.
4.
U.S. EPA, “Development Document for Effluent Limitations Guidelines for the Petroleum Refining Point Source Category”, EPA 440/1–79/014b, December 1979).
5.
U.S. EPA, “Development Document for interim Final Effluent Limitations Guidelines & New Source Performance Standards for the Significant Organic Products Segment of the Organic Chemical Manufacturing Point Source Category”, EPA 440/1–75/045, March 1975.
6.
Putnam, “What's the Best Way to Control an Interface When an Emulsion Tends to Form Between the Phases?” Control Magazine, July 1992, pp. 47–48.
7.
AgarG. G.ClewisR. P.SpencerC., “Energy Absorption Probes Reduce Oily Water Discharges”, Hydrocarbon Processing, August 1993, pp.56–59.
