Pistol Grip Power Tool Handle and Trigger Size Effects on Grip Exertions and Operator Preference

Abstract

Finger and palmar forces were measured during actual pneumatic nutrunner operation using a strain gauge dynamometer. Eighteen student subjects were assigned to one of three categories based on hand length. Two triggers and four handle spans were presented randomly. Handle span affected maximal and submaximal grip force. Asspan increased from 4 cm to 7 cm, average peak finger force increased 24%, peak palmar force increased 22%, and average finger and palmar tool-holding forces increased 20%. When an extended trigger was used, average peak finger force decreased 9%, peak palmar force decreased 8%, finger tool-holding force decreased 65%, and palmar tool-holding force decreased 48%. Hand size affected grip strength (MVC),grip force, and exertion level (force/MVC). Holding exertion level was maximum for large-handed subjects using a 4-cm handle and for small-handed subjects using a 7-cm handle. Subjective handle span preference increased as hand size increased. A similar experiment was performed using 11 factory workers.

Get full access to this article

View all access options for this article.

References

Amis, A. A. (1987). Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. Journal of Biomedical Engineering, 9, 313–320.

Armstrong, T. J. (1986). Ergonomics and cumulative trauma disorders. Occupational Injuries, 2, 553–565.

Armstrong, T. J. , Radwin, R. G. , Hansen, D. J. , and Kennedy, K. W. (1986). Repetitive trauma disorders: Job evaluation and design. Human Factors, 28, 325–336.

Ayoub, M. M. , and Lo Presti, P. (1971). The determination of an optimum size cylindrical handle by use of electromyography. Ergonomics, 14, 509–518.

Bonnici, A. V. , and Spencer, J. D. (1988). A survey of “trigger finger” in adults. Journal of Hand Surgery, 13B, 202–203.

Brown, J. (1977). Tennis without lessons. Englewood Cliffs, NJ: Prentice-Hall.

Fitzhugh, F. E. (1973). Dynamic aspects of grip strength (Tech. Report). Ann Arbor: University of Michigan, Department of Industrial and Operations Engineering.

Gothard, S. A. (1990). Equipment check: Get a handle on your grip size. Tennis, 26, 76.

Greenberg, L. , and Chaffin, D. B. (1975). Workers and their tools: A guide to the ergonomic design of hand tools and small presses. Midland, MI: Pendell.

10.

Greiner, T. M. (1991). Hand anthropometry of U.S. Army personnel (Tech. Report NATICK/TR-72/011). Natick, MA:U.S. Army Natick Research, Development and Engineering Center.

11.

Hertzberg, H. T. E. (1955). Some contributions of applied physical anthropology to human engineering. Annals of the New York Academy of Science, 63, 616–629.

12.

Kroemer, K. H. E. , and Marras, W. S. (1981). Evaluation of maximal and submaximal static muscle exertions. Human Factors, 23, 643–653.

13.

Lindqvist, B. , Ahlberg, E. , and Skogsberg, L. (1986). Ergonomic tools in our time. Stockholm: Atlas Copco Tools.

14.

Nasca, R. J. (1980). Trigger finger: A common hand problem. Journal of the Arkansas Medical Society, 76, 388–390.

15.

Petrofsky, J. S. , Williams, C. , Kamen, G. , and Lind, A. R. (1980). The effect of handgrip span on isometric exercise performance. Ergonomics, 23, 1129–1135.

16.

Pronk, C. N. A. , and Niesing, R. (1981). Measuring hand grip force using a new application of strain gauges. Medical, Biological Engineering and Computing, 19, 127–128.

17.

Putz-Anderson, V. (1988). Cumulative trauma disorders. New York: Taylor & Francis.

18.

Radwin, R. G. , Masters, G. P. , and Lupton, F. W. (1991). A linear force-summing hand dynamometer independent of point of application. Applied Ergonomics, 22, 339-345.

19.

Radwin, R. G. , Oh, S. , Jensen, T. R. , and Webster, J. G. (1992). External finger forces in submaximal five-finger static pinch prehension. Ergonomics, 35, 275–288.

20.

Rauko, M. , Herranen, S. , and Vuori, M. (1988). Ergonomics of powered hand tools on assembly line work. Trends in Ergonomics/Human Factors, V, 211–217.

21.

Schmidt, R. T. , and Toews, J. V. (1970). Grip strength as measured by the Jamar dynamometer. Archives of Physical Medicine & Rehabilitation, 51, 321–327.

22.

Swanson, A. B., Matev, I. B., and De Groot, G. (1970, Fall). The strength of the hand. Bulletin of Prosthetics Research, pp. 145–153.

23.

Young, V. L. , Pin, P. , Kraemer, B. A. , Gould, R. B. , Nemergut, L. , and Pellowski, M. (1989). Fluctuation in grip and pinch strength among normal subjects. Journal of Hand Surgery, 14A, 125–129.