Repetitive motion disorders of the upper extremities are the primary cause of lost time in hand-intensive industries. Typical remedies include the introduction of job aids and the redesign of the job. An alternative approach is considered here. Procedures are developed that can be used to determine the parameters of a job (e.g., the rate of work and the number and duration of the rest breaks) that minimize repetitive motion disorders and maximize productivity. It is shown that in theory the job parameters can be set so that one can achieve not only a decrease in repetitive motion disorders but also an increase in productivity. The application of the procedures to an actual manufacturing job requiring high-repetitive, highforce hand motions is discussed in detail
Get full access to this article
View all access options for this article.
References
1.
Andres, R. O., and Fisher, D. L. (1989, August). Phase I study: Documentation of catching jobs in the finishing area of Federal Paper Products Co., Inc. Amherst: University of Massachusetts, Department of Exercise Science.
2.
Armstrong, T. J. (1986). Ergonomics and cumulative trauma disorders. Hand Clinics, 2, 553–565.
3.
Armstrong, T. J., Castelli, W. A., Evans, F. G. and Diaz-Perez, R. (1984). Some histological changes in carpal tunnel contents and their biomechanical implications. Journal of Occupational Medicine, 26, 197–201.
4.
Armstrong, T. J., Fine, L. J., Goldstein, S. A., Lifshitz, Y. R., and Silverstein, B. A. (1987). Ergonomics considerations in hand and wrist tendinitis. Journal of Hand Surgery, 12A, 830–837.
5.
Armstrong, T. J., Foulke, J. A., Joseph, B. S., and Goldstein, S. A. (1982). Investigation of cumulative trauma disorders in a poultry processing plant. American Industrial Hygiene Association Journal, 43, 10:3–116.
6.
Armstrong, T. J., Radwin, R. G., Hansen, D. J., and Kennedy, K. W. (1986). Repetitive trauma disorders: Job evaluation and design. Human Factors, 28, 325–336.
7.
Arndt, R. (1987). Work pace, stress, and cumulative trauma disorders. Journal of Hand Surgery, 12A, 866–869.
8.
Barnes, R. M. (1968). Motion and time study. New York: Wiley.
9.
Bechtold, S. E., Janaro, R. E., and Sumners, D. L. (1984). Maximization of labor productivity through optimal rest-break schedules. Management Science, 30, 1442–1458.
10.
Chao, E. Y., Opgrande, J. D., and Axmear, F. E. (1976). Three-dimensional force analysis of finger joints in selected isometric hand functions. Journal of Biomechanics, 9, 387–396.
11.
Chu, B. M., and Blatz, P. J. (1972). Cumulative microdamage model to describe hysteresis of living tissue. Annals of Biomedical Engineering, I, 204–211.
12.
Damon, F. (1965). The use of biomechanics in manufacturing operations. Western Electric Engineer, 9(4).
13.
Emanuel, J., Mills, S., and Bennet, J. (1980). In search of a better handle. In Proceedings of the Symposium: Human Factors and Industrial Design in Consumer Products. Medford, MA: Tufts University.
14.
Gilbert, O. (1968). A manager's guide to work study.London: Wiley.
15.
Gilbreth, F. B., and Gilbreth, L. M. (1953). Fatigue study. In Spriegel and Myers (Eds.), The writings of Gilbreths (pp. 303–340). Homewood, IL: Irwin.
16.
Goldstein, S. A. (1981). Biomechanical aspects of cumulative trauma to tendons and tendon sheaths. Unpublished Ph.D. Thesis, University of Michigan, Ann Arbor.
17.
Goldstein, S. A., Armstrong, T. J., Chaffin, D. B., and Matthews, L. S. (1987). Analysis of cumulative strain in tendons and tendon sheaths. Journal of Biomechanics, 20, 1–6.
18.
Hazelton, F. T., Smidt, G. L., Flatt, A. E., and Stephens, R. I. (1975). The influence of wrist position on the force produced by the finger flexors. Journal of Biomechanics, 8, 301–306.
19.
Janaro, R. E., and Bechtold, S. E. (1985). A study of the reduction of fatigue impact on productivity through optimal rest break scheduling. Human Factors, 27, 459–466.
20.
Johnson, S., and Ogilvie, G. (1972). Work analysis. London: Butterworths.
21.
Lee, F. S. (1974). The human machine and industrial efficiency. Easton, PA: Hive.
22.
McFarland, R. A. (1971). Understanding fatigue in modern life. Ergonomics, 4, 1–10.
23.
McKenzie, F., Storment, J., Van Hook, P., and Armstrong, T. J. (1985). American Industrial Hygiene Association Journal, 46, 674–678.
24.
Rowe, L. M. (1987). The diagnosis of tendon and tendon sheath injuries. Seminars in Occupational Medicine, 2, 1–6.
25.
Silverstein, B. A., Fine, L. J., and Armstrong, T. J. (1986). Carpal tunnel syndrome: Causes and a preventative strategy. Seminars in Occupational Medicine, I, 213–220.
26.
Silverstein, B. A., Fine, L. J., and Armstrong, T. J. (1987). Occupational factors and carpal tunnel syndrome. American Journal of Industrial Medicine, 11, 343–358.
27.
Streimer, I. (1971). Considerations of energy investments as determinants of behavior. In Singleton, W. T., Fox, J. G., and Whitfield, D. (Eds.), Measurement of man at work (pp. 35–59). London: Taylor & Francis.
28.
Taylor, F. W. (1967). The Principles of Scientific Management. New York: W.W. Norton Company.
29.
Tichauer, E. (1976, February). Biomechanics sustains occupational safety and health. Industrial Engineering, 8, 63–71.
