Further Studies of Psychophysically Determined Maximum Acceptable Weights and Forces

Abstract

The effects of lifting boxes without handles, pulling long distances, carrying different size boxes, combining three handling tasks, and lifting with extended horizontal reach were studied using a psychophysical methodology. Six male industrial workers performed 42 variations of lifting, lowering, pushing, pulling, and carrying tasks. Lifting boxes without handles produced consistent decreases (median, 16%) in maximum acceptable weights when compared with lifting boxes with handles. Lifting with extended horizontal reach (approximately 48 cm) produced consistent decreases (median, 48%) in maximum acceptable weights when compared with lifting close to the body (approximately 17 cm). No significant heart rate or oxygen consumption differences occurred in either of these variables. No significant differences in maximum acceptable weight of carry were observed among box sizes; however, the maximum acceptable force of pulling was lower for longer (15.2 m) pulling tasks. The maximum acceptable weight for combination tasks was similar to that of the limiting component.

Get full access to this article

View all access options for this article.

References

Astrand, P. O. , and Rodahl, K. (1986). Textbook of work physiology. New York: McGraw-Hill.

Bigos, S. J. , Spengler, D. M. , Martin, N. A. , Zeh, J. , Fisher, L. , Nachemson, A. , and Wang, M. H. (1986). Back injuries in industry: A retrospective study: II. Injury factors. Spine, 2, 246–251.

Chaffin, D. B. (1975). Ergonomics guide for the assessment of human static strength. American Industrial Hygiene Association Journal, 36, 505–510.

Chaffin, D. B. , and Andersson, G. B. (1984). Occupational biomechanics. New York: Wiley.

Ciriello, V. M. , and Snook, S. H. (1978). The effects of size, distance, height, and frequency on manual handling performance. Proceedings of the Human Factors Society 22nd annual meeting (pp. 318–322). Santa Monica, CA: Human Factors and Ergonomics Society.

Ciriello, V. M. , and Snook, S. H. (1983). A study of size, distance, and frequency effects on manual handling tasks. Human Factors, 25, 473–483.

Ciriello, V. M. , Snook, S. H. , Blick, A. C. , and Wilkinson, P. L. (1990). The effects of task duration on psychophysically-determined maximum acceptable weights and forces. Ergonomics, 33, 187–200.

Drury, C. G. , Deeb, J. M. , Hartman, B. , Woolley, S. , Drury, C. E. , and Gallagher, S. (1989a). Symmetric and asymmetric manual materials handling. Part 1: Physiology and psychophysics. Ergonomics, 32, 467–489.

Drury, C. G. , Deeb, J. M. , Hartman, B. , Woolley, S. , Drury, C. E. , and Gallagher, S. (1989b). Symmetric and asymmetric manual materials handling. Part 2: Biomechanics. Ergonomics, 32, 565–583.

10.

Drury, C. G. , Law, C. , and Pawenski, C. S. (1982). A survey of industrial box handling. Human Factors, 24, 553–565.

11.

Eastman Kodak Co., Human Factors Section . (1986). Ergonomic design for people at work (vols. 1-2). New York: Van Nostrand Reinhold.

12.

Ferguson, G. A. (1971). Statistical analysis in psychology and education. New York: McGraw-Hill.

13.

Gordon, C. C. , Bradtmiller, B. , Churchill, T. , Clauser, C. E. , McConville, J. T. , Tebbetts, I. and Walker, R. A. (1989). 1988 anthropometric survey of U.S. Army personnel: Methods and summary statistics (Tech. Report 89/044). Yellow Springs, OH: Anthropology Research Project.

14.

Jiang, B. C. , Smith, J. L. , and Ayoub, M. M. (1986). Psychophysical modelling for combined manual materials handling activities. Ergonomics, 29, 1173–1190.

15.

Morrissey, S. J. , and Liou, Y. H. (1988). Maximum acceptable weights in load carriage. Ergonomics, 31, 217–226.

16.

National Institute for Occupational Safety and Health . (1981). Work practices guide for manual lifting (DHHS Publication 81-122). Cincinnati: U.S. Department of Health and Human Services.

17.

Snook, S. H. (1971). The effects of age and physique on continuous work capacity. Human Factors, 13, 467–479.

18.

Snook, S. H. (1978). The design of manual handling tasks. Ergonomics, 21, 963–985.

19.

Snook, S. H. (1987). Approaches to the control of back pain in industry: Job design, job placement, and education/training. Spine: State of the Art Reviews, 2, 45–59.

20.

Snook, S. H. , Campanelli, R. A. , and Hart, J. W. (1978). A study of three preventative approaches to low back injury. Journal of Occupational Medicine, 20, 478–481.

21.

Snook, S. H. , and Ciriello, V. M. (1974a). The effects of heat stress on manual handling tasks. American Industrial Hygiene Association Journal, 35, 681–685.

22.

Snook, S. H. , and Ciriello, V. M. (1974b). Maximum weights and work loads acceptable to female workers. Journal of Occupational Medicine, 16, 527–534.

23.

Webster, B. S. , and Snook, S. H. (1990). The cost of compensable low back pain. Journal of Occupational Medicine, 32, 13–15.

24.

Winer, B. J. (1971). Statistical principles in experimental design. New York: McGraw-Hill.