Arm Posture and Human Movement Capability

Abstract

Many workers perform manual assembly tasks or use hand tools while the hands are postured above the shoulders or to the side of the body. Experiments were conducted to study the sensitivity of speed-accuracy movement performance to a wide range of hand locations around the shoulder under various levels of hand loads, ratios of work to rest, and task durations. Subjects performed a spatially constrained stylus-to-hole Fitts reciprocal movement task designed to simulate high-incentive manual assembly operations while providing basic information regarding changes in human move and positioning capabilities. Significant decrements in movement performance occurred when hands were postured above shoulder level. Move and positioning times increased 15.3% and 26.5%, respectively, with elevation of the hand from −15 to 60 deg respective to shoulder level. Posturally based decrements in movement capability were unrelated to differences in subject strength capability found among test postures. The consequences of elevated arm postures on human move and positioning capability are presented along with workplace design and methods recommendations for job designers facing work-height decisions in manual assembly environments.

Get full access to this article

View all access options for this article.

References

Aberg, U. (1963). Frequency of occurrence of basic MTM motions (Research Committee Report No. 1). Stockholm: Svenska MTM-Foreningen.

Abrams, R. A. , Kornblum, S. , and Meyer, D. E. (1983). Fitts' law: Optimization of initial ballistic impulses for aimed movements. Proceedings of the Psychonomic Society (p. 335). Austin, TX: Psychonomic Society.

Astrand, I. , Guharay, A. , and Wahren, J. (1968). Circulatory response to arm exercise with different arm positions. Journal of Applied Physiology, 25, 528–533.

Barnes, R. M. (1968). Motion and time study---Design and measurement of work. New York: Wiley.

Briggs, J. S. (1955). A study in the design of work areas. Unpublished Ph.D. dissertation, Purdue University, Lafayette, IN.

Chung, C. S. (1983). A study of human arm movements with applications to predetermined motion time systems. Unpublished master's thesis, University of Melbourne, Australia.

Dempster, W. T. (1965). Mechanisms of shoulder movement. Archives of Physical Medicine and Rehabilitation, 46(1-A), 49–69.

Ellis, D. (1951). Speed of manipulative performance as a function of work-surface height. Journal of Applied Psychology, 35, 289–296.

Fitts, P. M. (1954). The information capacity of the human motor system in controlling the amplitude of movement. Journal of Experimental Psychology 46, 381–391.

10.

Fitts, P. M. , and Peterson, J. R. (1964). Information capacity of discrete motor responses. Journal of Experimental Psychology, 67, 34.1–34.10.

11.

Foulke, J. A. , and Keyserling, W. M. (1979). Force monitor: A system for human strength measurement. Ann Arbor: University of Michigan, Center for Ergonomics.

12.

Inman, V. T. , Saunders, J. B. , and Abbott, L. C. (1944). Observations on the function of the shoulder joint. Journal of Bone and Joint Surgery, 26(1), 1–30.

13.

Keele, S. W. (1981). Behavioral analysis of movement. In V. Brooks (Ed.), Handbook of physiology: Section 1: The nervous system. II. Motor control part 2 (pp. 1391–1414). Baltimore: American Physiological Society.

14.

Knight, A. A. , and Dagnall, P. R. (1967). Precision in movements. Ergonomics 10, 321–330.

15.

Knowles, E. (1946). Some effects of the height of ironing surface on the worker (Bulletin 833). Ithaca, NY: Cornell University Agricultural Experiment Station.

16.

Konz, S. (1967). Design of work stations. Journal of Industrial Engineering, 18, 413–423.

17.

Konz, S. , Jeans, C. , and Rathore, R. S. (1969). Arm motions in the horizontal plane. AIIE Transactions, 1(4), 359–370.

18.

Langolf, G. D. , Chaffin, D. B. , and Foulke, J. A. (1976). An investigation of Fitts' law using a wide range of movement amplitudes. Journal of Motor Behavior, 8(2), 113–128.

19.

Neter, J. , and Wasserman, W. (1974). Applied linear statistical models. Homewood, IL: Irwin.

20.

Pierson, W. R. (1961). Body size and speed. Research Quarterly, 32, 197–200.

21.

Rasch, P. J. (1954). Relationship of arm strength, weight, and length to speed of arm movement. Research Quarterly, 25, 328–332.

22.

Schmidt, R. A. (1982). Motor control and learning: A behavioral emphasis. Champaign, IL: Human Kinetics.

23.

Schmidt, R. A. , Zelaznik, H. N. , and Frank, J. S. (1978). Source of inaccuracy in rapid movement. In G. E. Stelmach (Ed.), Information processing in motor control and learning (pp. 183–203). New York: Academic Press.

24.

Schmidtke, H. , and Stier, F. (1961). An experimental evaluation of the validity of predetermined elemental time systems. Journal of Industrial Engineering, 12, 182–204.

25.

Smyth, M. M. , and Wing, A. M. (1984). The psychology of human movement. New York: Academic Press.

26.

Welford, A. T. (1968). Fundamentals of skill. London: Methuen.

27.

Wiker, S. F. (1986a). Effects of relative hand location upon movement time and fatigue. Unpublished Ph.D. dissertation, University of Michigan, Ann Arbor.

28.

Wiker, S. F. (1986b). A technical support memorandum for effects of relative hand location upon movement time and fatigue. Ann Arbor: University of Michigan, Center for Ergonomics.