Robotics is a new technology domain that human factors scientists and practitioners should enter, to represent the human role in automation. Robots have varying functional capabilities, applications, and rationales. From the perspective of human factors engineering, the most important question is the division of labor between robots and humans. Humans participate in robot systems in nine activities: surveillance, intervention, maintenance, backup, input, output, supervision, inspection, and synergy. Additional concerns include hardware and software design of interfaces with operators, procedure development, accident prevention, and training. There have been a few human factors studies, including some by the Army, Air Force, and Navy (in teleoperators), but more are needed, drawing in part on research in artificial intelligence, to support robotics for industrial productivity and military requirements.
Get full access to this article
View all access options for this article.
References
1.
Abraham, R. G., Stewart, R., Yaroshuk, N., Shum, L., Csakvary, T., Korpella, J., Taleff, A., Boothroyd, G., Hill, J., Bolles, R., and Gleason, G., (Eds.) Compilation of Westinghouse R&D Center reports on programmable assembly research technology transfer to industry. Volumes I & II. Pittsburgh, PA: Westinghouse R&D Center, 1977.
2.
Asimov, I.I, robot. New York: Doubleday, 1950.
3.
Bejczy, A. K.Sensors, controls, and man-machine interface for advanced teleoperation. Science, 1980, 208, 1327–1335.
4.
Birk, J., and Kelley, R. (Eds.) Workshop on the Research Needed to Advance the State of Knowledge in Robotics. Providence, RI: University of Rhode Island, 1980.
5.
Boothroyd, G.The performance and economics of assembly systems. In R. G. Abraham, R. Stewart, N. Yaroshuk, L. Shum, T. Csakvary, J. Korpella, A. Taleff, G. Boothroyd, J. Hill, R. Bolles, and G. Gleason, (Eds.) Compilation of Westinghouse R&D Center reports on programmable assembly research technology transfer to industry. Vol. II. Pittsburgh, PA: Westinghouse R&D Center, 1977.
Brooks, T. L., and Sheridan, T. B.Superman: A system for supervisory manipulation and the study of human/computer interactions. Cambridge, MA: Sea Grant College Program, Massachusetts Institute of Technology, Report No. MITSG 79–20, 1979.
8.
Brooks, T. L., and Sheridan, T. B.Experimental evaluation of the concept of supervisory manipulation. Paper presented at the Sixteenth Annual Conference on Manual Control, 1980.
9.
Cooke, R. A.Robotics in the U.K.---An overview. Paper presented at the Robots VI Conference and Exposition, 1982. Dearborn, MI: Society of Manufacturing Engineers, Report No. MS80–703. 1982.
10.
Cowart, N. A., Csakvary, T., Makhlin, A., Ottinger, B. D., Rogers, W. L., Tomko, L. M., and Wen, Y. (Eds.) Programmable assembly research technology transfer to industry-Phase 2. Pittsburgh, PA: Westinghouse R&D Center, 1981.
11.
Engelberger, J. F.Man-robot symbiosis. In Proceedings of the Fourth International Symposium on Industrial Robots, 1974 149–162.
12.
Engelberger, J. F.Robotics in practice. New York: Amacom Division of American Management Assn., 1980.
13.
Fikes, R. E., Hart, P. E., and Nilsson, N. J.Learning and executing generalized robot plans. Artificial Intelligence, 1972, 3, 251–288.
14.
Finkel, R., Taylor, R., Bolles, R., Paul, R. and Feldman, J.An overview of AL; a programming system for automation, In Proceedings of the Fourth International Joint Conference on Artificial Intelligence, 1975.
15.
Gatland, K.Robot explorers. New York: Macmillan, 1972.
16.
Hanes, L. F.Report of Committee to Define Worker-Related Research for Adaptable-Programmable Assembly System. Pittsburgh, PA: Westinghouse R&D Center, 1980.
17.
Harmon, L. D.Touch sensing technology: A review. Dearborn, MI: Society of Manufacturing Engineers, Report MSR80–03, 1980.
18.
Howard, J. M.ICAM decision support system case study. In A. Macek, L. Heeringa, B. Somberg, D. Sauer, R. Robbins, and J. Howard (Eds.) Human factors affecting ICAM implementation. Wright-Patterson Air Force Base, OH: Materials Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, Report No. AFWAL-TR-81-4095, 1981.
19.
Howard, J. M.Human factors issues in the factory integration of robots. Paper presented at the Robots VI Conference and Exposition, 1982. Dearborn. MI: Society of Manufacturing Engineers, Report No. MS82–127, 1982.
20.
Kamali, J., Moodie, C. L., and Salvendy, G.A framework for integrated assembly systems: Humans, automation and robots. In Proceedings of the 2nd International Conference on Assembly Automation. Brighton, UK, 1981.
21.
Knowles, W. B.Human engineering in remote handling. Wright-Patterson Air Force Base, OH: Aerospace Medical Research Laboratories, Technical Documentary Report No. 62–58, 1962.
22.
Lieberman, L. and Wesley, M.Autopass: An automatic programming system for computer-controlled mechanical assembly. IBM Journal of Research and Development, 1977, 21, 231
23.
Lozano-Perez, T.The design of a mechanical assembly system. Cambridge, MA: M.I.T. Artificial intelligence technical report, 1976.
24.
Malone, R.The robot book. New York: Jove Publications, 1978.
25.
Martin, T. B.A practical voice input system. In R. Seidel and M. Rubin (Eds.) Computers and communication. New York: Academic Press, 1977.
26.
Miller, S. (Ed.) The impact of robotics on the workforce and workplace. Pittsburgh, PA: Department of Engineering and Public Policy, Carnegie-Mellon University, 1981 (Draft).
27.
Moravec, H. P.Robot rover visual navigation. Ann Arbor, MI: U. of Michigan Research Press, 1981.
28.
Nof, S., Knight, J. and Salvendy, G.Effective utilization of industrial robots: A job and skills analysis approach. AIIE Transactions, 1980, 12, (3), 216–225.
29.
Parsons, H. M.What happened at Hawthorne?Science, 1974, 183, 922–932.
30.
Parsons, H. M.What caused the Hawthorne effect?Administration and Society, 1978, 10, 259–283.
31.
Parsons, H. M.Automation and engineering psychology: A look to the future. Invited address at the annual meeting of the American Psychological Association, 1981. Alexandria, VA: Human Resources Research Organization, Professional paper 7081, 1981.
32.
Paul, R. P.Robot manipulators: Mathematics, programming and control. Cambridge, MA: M.I.T. Press, 1981.
33.
Pigg, L. D.Human factors in remote handling. In Human Factors of Remote Handling in Advanced Systems Symposium. Wright-Patterson Air Force Base, OH: Aeronautical Systems Division, ASD Technical Report 61–430, 1961.
34.
Reddy, D.Speech recognition. New York: Academic Press, 1975.
35.
Reichardt, J.Robots: Fact, fiction and prediction. New York: Penguin, 1978.
36.
Robot Institute of America, Robotics Today, 1980 (Spring), 7.
37.
Rosen, C. A.Machine vision and robotics: Industrial requirements. In G. G. Dodd and L. Rossol (Eds.) Computervision and sensor-based robots. New York: Plenum Press, 1979.
38.
Ruoff, C.TEACH---A concurrent robot control language. In Proceedings of the Annual IEEE Computer Software Applications Conference. Chicago: IEEE, 1979.
39.
Saveriano, J. W.Industrial robots today and tomorrow. Robotics Age, 1980 (Summer), 4, 12–17.
40.
Sheridan, T. B.Computer control and human alienation. Paper presented at the World Council of Churches Conference on Faith, Science, and the Future, at the Massachusetts Institute of Technology, July, 1979. Published in the MIT Technology Review, 1980.
41.
Sheridan, T. B., and Verplank, W. L.Human and computer control of undersea teleoperators. Cambridge, MA: M.I.T. Technical Report for the Office of Naval Research, 1978.
42.
Shimano, N.User's guide to VAL. Stamford, CT: Unimation Inc., 1979.
43.
Shneiderman, B.Software psychology: Human factors in computer and information systems. Cambridge, MA: Winthrop. 1980.
44.
Slay, A. D.Computers in manufacturing: Meeting the productivity challenge. Air Force Magazine, 1980 (July), 54–60.
45.
Toepperwein, L., Blackmon, M. T., Fukui, R., Park, W. T., Pollard, B., Seltzer, D., and Tarvin, R.ICAM robotics application guide (RAG). Wright-Patterson Air Force Base, OH: Materials Laboratory, Air Force Wright Aeronautical Laboratories, Report AFWAL-TR-80-4042, Vol. II, 1980.
46.
Winston, P.Computer vision. New York: Academic Press, 1977.
47.
Vranish, J. M.The robotic deriveter-Systems concept. Paper presented at the Robots VI Conference and Exposition, 1982. Dearborn, MI: Society of Manufacturing Engineers, Report MS80–713, 1980.
48.
Winograd, T.Understanding natural language. New York: Academic Press, 1972.
49.
Worn, H.Safety equipment for industrial robots. Paper presented at the Robots VI Conference and Exposition, 1982. Dearborn, MI: Society of Manufacturing Engineers, Report MS80–714, 1980.
