A literature survey on recommendations for the maximum weight of the load and work loads is presented. Three different criteria are reviewed to determine the "safe" weight and permissible work loads that a person can lift. These are biomechanical, psychophysical, and metabolic/heart rate. A comparison of recommended load limits based on each of the three criteria is presented. Maximum weight of the load and work loads based on the three criteria are also compared. The comparison shows that (1) the recommendations based on a given criterion are not in agreement, (2) the maximum permissible weights of the load based on psychophysical studies are lower than those based on biomechanical criteria, and (3) the psychophysical fatigue criteria, as compared to physiological fatigue criteria, will result in greater work loads at higher frequencies of lifting. Load-pace tradeoff and effects of lifting technique and location of load on acceptable work loads are also discussed.
Get full access to this article
View all access options for this article.
References
1.
Aquilano, N. J.A physiological evaluation of time standards for strenuous work as set by stopwatch time study and two predetermined motion time data systems. Journal of Industrial Engineering., 1968, 19, 425–532.
2.
Asmussen, E., Poulsen, E., Rasmussen, B.Quantitative evaluation of the activity of the back muscles in lifting. Hellerup. Denmark: Danish National Association for Infantile Paralysis. Communication No. 21. 1965.
3.
Ayoub, M. M., Bethea, N. J., Deivanayagam, S., Asfour, S. S., Bakken, G. M., Liles, D., Mital, A., and Sherif, M. Determination and modeling of lifting capacity. DHEW (NIOSH) Report, Grant #5 R01 OH 005 45-02, August, 1978.
4.
Ayoub, M. M. and EI-Bassoussi, M. M.Dynamic biomechanical model for sagittal lifting activities. Proceedings of 6th Congress of International Ergonomics Association, 1976, 355–359.
5.
Ayoub, M. M., Milal, A., Asfour, S. S., and Bethea, N. J.Review. evaluation. and comparison of models for predicting lifting capacity. Human Factors, 1980, 22, 257–269. (a)
6.
Ayoub, M. M., Mital, A., Bakken, G. M., Asfour, S. S., and Bethea, N. J.Development of strength and capacity norms for manual materials handling activities: The state of the art. Human Factors, 1980, 22, 271–283.(b)
7.
Bink, B.The physical working capacity in relation to working time and age. Ergonomics, 1962, 5, 25–28.
8.
Bink, B.Additional studies on physical working capacity in relation to working time and age. Proceedings of 2nd International Congress on Ergonomics, Dortmund, 1964.
9.
Bonjer, F. H.Actual energy expenditure in relation to the physical working capacity. Ergonomics, 1962,5, 29–31.
10.
Brouha, L.Physiology in industry. New York: Pergammon Press, 1960.
11.
Brown, J. R.Lifting as an industrial hazard. Ontario: Ontario Labour Safety Council, 1971.
12.
Chaffin, D. B.A computerized biomechanical model development of the use in studying gross body actions. Journal of Biomechanics, 1969, 2, 429–441.
13.
Chaffin, D. B.Some effects of physical exertion. Ann Arbor: The University of Michigan. Department of Industrial Engineering, 1972.
14.
Chaffin, D. B., Herrin, G. D., Keyserling, W. M., and Foulke, J. A. Pre-employment strength testing. DHEW (NIOSH) Publication No. 77–163, Washington, DC, 1977.
15.
Chaffin, D. B. and Park, K. S.A longitudinal study of low back pain as associated with occupational weight lifting factors. American Industrial Hygiene Association Journal, 1973, 34, 513–525.
16.
Davis, H. L., Faulkner, T. W., and Miller, C. I.Work physiology. Human Factors, 1969, 11, 157–166.
17.
Dryden, R. D. A predictive model for the maximum permissible weight of lift from knuckle to shoulder height. Unpublished doctoral dissertation. Texas Tech University. Lubbock. 1973.
18.
Emanuel, I., Chaffee, J. W., and Wing, J. A study of human weight lifting capabilities for loading ammunilion into the F-86H aircraft. Wright-Patterson Air Force Base, OH: Medical Research Laboratory Technical Report WADC-TR-56-367.1956.
19.
Firoini, G. T. and McCammond, D.Forces on lumbovertebral facet. Annals of Biomedical Engineering, 1976, 4, 354–363.
20.
Garg, A. A metabolic rate prediction model for manual materials handling jobs. Unpublished doctoral dissertation. The University of Michigan, Ann Arbor, 1976.
21.
Garg, A. and Chaffin, D. B.A biomechanical computerized simulation of human strength. Transactions of American Institute of Industrial Engineers., 1975, 7, 1–15.
22.
Garg, A., Chaffin, D. B., and Herrin, G. D.Prediction of metabolic rates for manual materials handling jobs. American Industrial Hygiene Association Journal, 1978, 39, 661–674.
23.
Grandjean, E.Filling the task to the man.London: Taylor and Francis, Ltd., 1969.
24.
International Labor Office. Meetings of experts on the maximum permissible weight to be carried by one worker. Geneva, M.P.W./1965/14, 1965.
25.
Keyserling, W. M. Isometric strength testing in selecting workers for strenuous jobs. Unpublished doctoral dissertation, The University of Michigan, Ann Arbor, 1979.
26.
Knipfer, R. E. Predictive models for the maximum acceptable weight of lift. Unpublished doctoral dissertation, Texas Tech University, Lubbock, 1974.
27.
Larocca, H, and Macnab, I.Value of preemployment radiographic assessment of the lumbar spine. Industrial Medicine and Surgery, 1970, 39, 253–258.
28.
Lehmann, G.Physiological measurements as a basis of work organization in industry. Ergonomics, 1958, 1, 328–344.
29.
Lind, A. R. and Petrofsky, J. S.Cardiovascular and respiratory limitations on muscular fatigue during lifting tasks. St. Louis: St. Louis University, Department of Physiology, 1978.
30.
Martin, J. B. and Chaffin, D. B.Biomechanical computerized simulation of human strength in sagittal-plane activities. Transactions of American Institute of Industrial Engineers, 1972, 4, 19–28.
31.
McDaniel, J. W. Prediction of acceptable lift capability. Unpublished doctoral dissertation, Texas Tech University, Lubbock, 1972.
32.
Mital, A. and Ayoub, M. M.Modeling of isometric strength and lifting capacity. Human Factors, 1980, 22, 285–291.
33.
Nachemson, A. and Elfstrom, G.Intravertebral dynamic pressure measurements in lumbar discs: A study of common movements, maneuvers and exercises, Scandinavian Journal of Rehabilitation Medicine, 1970, 1, Supplement 2, 1–40.
34.
Park, K, S. and Chaffin, D. B.A biomechanical evaluation of two methods of manual load lifting. Transactions of American Institute of Industrial Engineers, 1974, 6, 105–113.
35.
Poulsen, E.Prediction of maximum loads in lifting from measurements of muscular strength. Hellerup, Denmark: Danish National Association for Infantile Paralysis, Communication No. 31, 1970.
36.
Poulsen E. and Jorgensen, K.Back muscle strength, lifting, and stooped working postures. Applied Ergonomics, September, 1971, 133–137.
37.
Redfield, J. T.The low back x-ray as a preemployment screening tool in the forest products industry. Journal of Occupational Medicine, 1971, 13, 219–223.
38.
Rowe, L. M.Low-back pain in industry--A position paper. Journal of Occupational Medicine, 1969, 11, 161–169.
39.
Snook, S. H.The design of manual handling tasks. Bedfordshire, England: The Ergonomics Society, The Society's Lecture, Cranfield Institute of Technology, April, 1978.
40.
Snook, S. H., Campanelli, R. A., and Hart, J. W.A study of three preventive approaches to low back injury. Journal of Occupational Medicine, 1978, 20, 478–483.
41.
Snook, S. H. and Ciriello, V. M.Maximum weights and work loads acceptable to female workers. Journal of Occupational Medicine, 1974, 16, 527–534.
42.
Snook, S, H, and Irvine, C. H.The evaluation of physical tasks in industry. American Industrial Hygiene Association Journal, 1966, 27, 228–233.
43.
Snook, S. H. and Irvine, C. H.Maximum acceptable weight of lift. American Industrial Hygiene Association Journal, 1967, 28, 323–329.
44.
Snook, S. H. and Irvine, C. H.Maximum frequency of lift acceptable to male industrial workers. American Industrial Hygiene Association Journal, 1968, 28, 531–536.
45.
Snook, S. H. and Irvine, C. H.Psychophysical studies of physiological fatigue criteria. Human Factors, 1969, 11, 291–299.
46.
Snook, S. H., Irvine, C. H., and Bass, S. F.Maximum weights and work loads acceptable to male industrial workers. American Industrial Hygiene Association Journal, 1970, 31, 579–586.
47.
Suggs, C. W. and Splinter, W. E.Some physiological responses of man to work load and environment. Journal of Applied Physiology, 1961, 16, 413–417.
48.
Switzer, A. A. Weight lifting capabilities of a selected sample of human males. Wright Patterson Air Force Base, OH: Aerospace Medical Research Laboratories, MLRTDR-62-57, 1962.
49.
Tichauer, E. R.A pilot study of the biomechanics of lifting in simulated industrial work situations. Journal of Safety Research, September, 1971.
50.
Woodson, W. E. and Conover, D. W.Human engineering guide to equipment designers.Berkeley: University of California Press, 1964.
