Sage Journals: Discover world-class research

Abstract

It has been suggested that performance in an industrial inspection task can be improved by rapidly alternating images of the item to be inspected and a perfect item onto the visual field of the inspector. Such a blink inspection system was evaluated for a complex item (a printed circuit board which could contain three flaws) and a simple item (a blank field which could contain one flaw) using eight student subjects for each of five inspection conditions. Three groups, one using blink inspection and two control groups, inspected circuit boards; two groups (one blink and one control) inspected blank fields. Search time was improved by blink inspection for the circuit boards and with different defects showing different degrees of improvement. Only one type of defect showed both reduced search times and reduced errors. For blank fields, performance was worse under blink inspection. Subjects showed a consistent tendency to terminate their search for defects in a logical manner, with stopping time related to search difficulty. Measures of heart rate mean and variability were taken as a pilot study to measure task stress. There was little evidence from the heart rate measures that the task was stressful.

Get full access to this article

View all access options for this article.

References

Bloomfield, J. R. Studies on visual search. In C. G. Drury and J. G. Fox (Eds.) Human reliability in quality control. London: Taylor & Francis, 1975.

Daniels, E.B. , Kobas, G. V. , and Drury, C. G. Monetary and non-monetary incentives in motor performance. Ergonomics, 1976, 19, 61–68.

Drury, C. G. Integration of human factors models into statistical quality control. Human Factors, 1978, 20 (5), 561–572.

Drury, C. G. and Clement, M. R. , The effects of area, density and number of background characters on visual search. Human Factors, 1978, 20 (5), 597–602.

Enoch, J. M. Natural tendencies in visual search of a complex display. In A. Morris and E. P. Home (Eds.) Visual search techniques. Washington, D.C.: National Academy of Science, 1960.

Erickson, D. P C visual inspection techniques. Electronic Packaging and Production, 1978, 18.12, 61–73.

Ginherich, O. The solar system beyond Neptune. Scientific American, 1959, 200(4), 86.

Harris, D. H. and Chaney, F. B. Human factors in quality assurance. New York: Wiley and Sons, 1969.

Innes, R. T. The blink microscope as an aid in the investigation of the sidereal universe. Scielltia, 1919, 26, 181–194.

10.

Klingberg, C. L. , Kraft, C. L. , and Elworth, C. L. A study of photointerpreter performance in change discrimination. Seattle, Washington: Boeing Co., Technical Report RADC-TR-63-482; AD-431495, 1963.

11.

Monk, T. H. and Brown, B. The effect of target surround density on visual search performance. Human Factors, 1977, 17, 356–360.

12.

Moraal, J. The analysis of an inspection task in the steel industry. In C. G. Drury and J. G. Fox (Eds.) Human reliability ill quality control. London: Taylor & Francis, 1975.

13.

Morawski, T. B. The development of optimal stopping time models for industrial inspection. Unpublished Master of Science thesis, State University of New York at Buffalo, Department of Industrial Engineering, 1978.

14.

Nature, The blink microscope, 1919, 103, 194.

15.

Smith, S. L. and Goodwin, N. C. , Blink coding for information display. Human Factors, 1971, 13 (3). 283–290.

16.

Teel, K. S. , Springer, R. M. , and Sadler, E. E. Assembly and inspection of microminiature systems. Hutltan Factors, 1968, 10, 217–224.

An Evaluation of Blink Inspection

Abstract

Get full access to this article

References