The National Institute for Occupational Safety and Health (NIOSH) Recommended Weight Generates Different Spine Loads in Load-Handling Activity Performed Using Stoop,Semi-squat and Full-Squat Techniques;a Full-Body Musculoskeletal Model Study

Abstract

Objective

Adequacy of the Revised NIOSH Lifting Equation (RNLE) in maintaining lumbosacral (L5-S1) loads below their recommended action limits in stoop, full-squat, and semi-squat load-handling activities was investigated using a full-body musculoskeletal model.

Background

The NIOSH committee did not consider the lifting technique adapted by workers when estimating the recommended weight limit (RWL). It is currently unknown whether the lifting technique adapted by workers would affect the competence of the RNLE in keeping spine loads below their recommended limits.

Method

A full-body subject-specific musculoskeletal model (Anybody Modeling System, AMS) driven by a 10-camera Vicon motion capture system (Vicon Motion Systems Inc., Oxford, UK) was used to simulate different static stoop, semi-squat, and full-squat load-handling activities of ten normal-weight volunteers (mean of ∼70 kg corresponding to the 15th percentile of adult American males) with the task-specific NIOSH RWL held in hands.

Results

Two-way repeated measures ANOVA revealed a significant effect of lifting technique on both the L5-S1 compression (p = 0.003) and shear (p = 0.004) loads with semi-squat technique resulting in significantly larger loads than both stoop and full-squat techniques (p < 0.05). While mean of L5-S1 loads remained smaller than their recommended limits, it is much expected that they pass these limits for heavier individuals, that is, for the 50th percentile of adult American males.

Conclusion

Spinal loads are expected to pass their recommended limits for heavier individuals especially during semi-squat lifting as the most frequently adapted technique by workers.

Application

Caution is required for the assessment of semi-squat lifting activities by the RNLE.

Keywords

NIOSH equation stoop squat musculoskeletal model spine loads lifting techniques

Get full access to this article

View all access options for this article.

References

Akhavanfar

M. H.

Kazemi

Eskandari

A. H.

Arjmand

(2018). Obesity and spinal loads; a combined MR imaging and subject-specific modeling investigation. Journal of Biomechanics, 70, 102–112. https://doi.org/10.1016/j.jbiomech.2017.08.009

Andersen

M. S.

Damsgaard

MacWilliams

Rasmussen

(2010). A computationally efficient optimisation-based method for parameter identification of kinematically determinate and over-determinate biomechanical systems. Computer Methods in Biomechanics and Biomedical Engineering, 13(2), 171–183. https://doi.org/10.1080/10255840903067080

Andersen

M. S.

Damsgaard

Rasmussen

(2009). Kinematic analysis of over-determinate biomechanical systems. Computer Methods in Biomechanics and Biomedical Engineering, 12(4), 371–384. https://doi.org/10.1080/10255840802459412

Arjmand

Amini

Shirazi-Adl

Plamondon

Parnianpour

(2015). Revised NIOSH Lifting Equation May generate spine loads exceeding recommended limits. International Journal of Industrial Ergonomics, 47, 1–8. https://doi.org/10.1016/j.ergon.2014.09.010

Bazrgari

Shirazi-Adl

Arjmand

(2007). Analysis of squat and stoop dynamic liftings: Muscle forces and internal spinal loads. European Spine Journal, 16(5), 687–699. https://doi.org/10.1007/s00586-006-0240-7

Behjati

Arjmand

(2019). Biomechanical assessment of the NIOSH lifting equation in asymmetric load-handling activities using a detailed musculoskeletal model. Human Factors: The Journal of the Human Factors and Ergonomics Society, 61(2), 191–202. https://doi.org/10.1177/0018720818795038

Dreischarf

Rohlmann

Graichen

Bergmann

Schmidt

(2016). In vivo loads on a vertebral body replacement during different lifting techniques. Journal of Biomechanics, 49(6), 890–895. https://doi.org/10.1016/j.jbiomech.2015.09.034

Faber

G. S.

Kingma

Bakker

A. J.

van Dieën

J. H.

(2009). Low-back loading in lifting two loads beside the body compared to lifting one load in front of the body. Journal of Biomechanics, 42(1), 35–41. https://doi.org/10.1016/j.jbiomech.2008.10.013

Fluit

Andersen

M. S.

Kolk

Verdonschot

Koopman

H. F.

(2014). Prediction of ground reaction forces and moments during various activities of daily living. Journal of Biomechanics, 47(10), 2321–2329. https://doi.org/10.1016/j.jbiomech.2014.04.030

10.

Fryar

C. D.

Ogden

C. L.

(2012). Anthropometric reference data for children and adults: United States, 2007-2010. Vital and Health Statistics. Series 11, Data from the National Health Survey, 252(252), 1–48.

11.

Gallagher

Marras

W. S.

(2012). Tolerance of the lumbar spine to shear: A review and recommended exposure limits. Clinical Biomechanics, 27(10), 973–978. https://doi.org/10.1016/j.clinbiomech.2012.08.009

12.

Ghezelbash

Shirazi-Adl

Arjmand

El-Ouaaid

Plamondon

Meakin

J. R.

(2016). Effects of sex, age, body height and body weight on spinal loads: Sensitivity analyses in a subject-specific trunk musculoskeletal model. Journal of Biomechanics, 49(14), 3492–3501. https://doi.org/10.1016/j.jbiomech.2016.09.026

13.

Gholipour

Arjmand

(2016). Artificial neural networks to predict 3D spinal posture in reaching and lifting activities; Applications in biomechanical models. Journal of Biomechanics, 49(13), 2946–2952. https://doi.org/10.1016/j.jbiomech.2016.07.008

14.

Hajihosseinali

Arjmand

Shirazi-Adl

(2015). Effect of body weight on spinal loads in various activities: A personalized biomechanical modeling approach. Journal of Biomechanics, 48(2), 276–282. https://doi.org/10.1016/j.jbiomech.2014.11.033

15.

Have

Van Rossom

Jonkers

(2019). Squat lifting imposes higher peak joint and muscle loading compared to stoop lifting. Applied Sciences, 9(18), 3794. https://doi.org/10.3390/app9183794

16.

Hwang

Kim

(2009). Lower extremity joint kinetics and lumbar curvature during squat and stoop lifting. BMC Musculoskeletal Disorders, 10(1), 15. https://doi.org/10.1186/1471-2474-10-15

17.

Jung

Lee

Koo

(2014). Ground reaction force estimation using an insole-type pressure mat and joint kinematics during walking. Journal of Biomechanics, 47(11), 2693–2699. https://doi.org/10.1016/j.jbiomech.2014.05.007

18.

Khoddam-Khorasani

Arjmand

Shirazi-Adl

(2020). Effect of changes in the lumbar posture in lifting on trunk muscle and spinal loads: A combined in vivo, musculoskeletal, and finite element model study. Journal of Biomechanics, 104, 109728. https://doi.org/10.1016/j.jbiomech.2020.109728

19.

Larsen

F. G.

Svenningsen

F. P.

Andersen

M. S.

de Zee

Skals

(2020). Estimation of spinal loading during manual materials handling using inertial motion capture. Annals of Biomedical Engineering, 48(2), 805–821. https://doi.org/10.1007/s10439-019-02409-8

20.

McGill

Norman

Yingling

Wells

Neumann

(1998). Shear Happens! Suggested guidelines for ergonomists to reduce the risk of low back injury from shear loading. In 30th Annu. In Conf. Hum. Factors Assoc. Canada, Missisauga, Ontario, Canada, 1998.

21.

McGill

S. M.

(1997). The biomechanics of low back injury: Implications on current practice in industry and the clinic. Journal of Biomechanics, 30(5), 465–475. https://doi.org/10.1016/s0021-9290(96)00172-8

22.

Mohseni

Aghazadeh

Arjmand

(2022). Improved artificial neural networks for 3D body posture and lumbosacral moment predictions during manual material handling activities. Journal of Biomechanics, 131, 110921. https://doi.org/10.1016/j.jbiomech.2021.110921

23.

Pascual

S. A.

Naqvi

(2008). An investigation of ergonomics analysis tools used in industry in the identification of work-related musculoskeletal disorders. International Journal of Occupational Safety and Ergonomics, 14(2), 237–245. https://doi.org/10.1080/10803548.2008.11076755

24.

Potvin

J. R.

McGill

S. M.

Norman

R. W.

(1991). Trunk muscle and lumbar ligament contributions to dynamic lifts with varying degrees of trunk flexion. Spine, 16(9), 1099–1107. https://doi.org/10.1097/00007632-199109000-00015

25.

Rajaee

M. A.

Arjmand

Shirazi-Adl

Plamondon

Schmidt

(2015). Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities. Applied Ergonomics, 48, 22–32. https://doi.org/10.1016/j.apergo.2014.11.002

26.

Straker

(2003). Evidence to support using squat, semi-squat and stoop techniques to lift low-lying objects. International Journal of Industrial Ergonomics, 31(3), 149–160. https://doi.org/10.1016/s0169-8141(02)00191-9

27.

van Dieën

J. H.

Hoozemans

M. J.

Toussaint

H. M.

(1999). Stoop or squat: A review of biomechanical studies on lifting technique. Clinical Biomechanics, 14(10), 685–696.

28.

Waters

T. R.

Putz-Anderson

Garg

Fine

L. J.

(1993). Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, 36(7), 749–776. https://doi.org/10.1080/00140139308967940

29.

Wilke

H. J.

Neef

Hinz

Seidel

Claes

(2001). Intradiscal pressure together with anthropometric data - a data set for the validation of models. Clinical Biomechanics, 16(Suppl 1), S111–S126. https://doi.org/10.1016/s0268-0033(00)00103-0