In this study, the reliability of measures of upper body postural behavior (head, thorax, neck, and arm) during sustained office work was evaluated.
Background:
Although there has been a substantial body of research examining the technical aspects of posture measurement in office workers using motion sensors, there is a paucity of literature examining whether posture-related behaviors are actually consistent among office workers in the field on different days and times.
Method:
Thirty one office workers performed their usual work for three, 1-hr sessions (two morning sessions and one afternoon session) while wearing wireless motion sensors. Reliability coefficients of the derived measures of postural behavior were calculated.
Results:
Most (30/31) of the postural behavior measures demonstrated modest to excellent reliability (ICC 2.1: 0.48–0.84). Reliability appeared to be mildly affected by factors such as the time of day recordings were taken and variations in desk setups.
Conclusion:
The findings suggest these measures may be a reliable method for evaluating postural behavior in the office work environment in future studies.
Application:
Postural measurement using a technical motion sensor described an acceptable reliability to be used for risk assessment in the workplace. Consideration of assessment time and desk setting would increase the accuracy of postural measurement.
AikenL. S.WestS. G. (1991). Multiple regression: Testing and interpreting interactions. Newbury Park, CA: Sage.
2.
AlexanderH. W. (1947). The estimation of reliability when several trials are available. Psychometrika, 12(2), 79–99.
3.
AriensG. A.BongersP. M.DouwesM.MiedemaM. C.HoogendoornW. E.van der WalG.BouterL.van MechelenW. (2001). Are neck flexion, neck rotation, and sitting at work risk factors for neck pain? Results of a prospective cohort study. Occupational & Environmental Medicine, 58(3), 200–207.
4.
AriensG. A.BongersP. M.HoogendoornW. E.van der WalG.van MechelenW. (2002). High physical and psychosocial load at work and sickness absence due to neck pain. Scandinavian Journal of Work, Environment, & Health, 28(4), 222–231.
5.
ArvidssonI.HanssonG. A.MathiassenS. E.SkerfvingS. (2008). Neck postures in air traffic controllers with and without neck/shoulder disorders. Applied Ergonomics, 39(2), 255–260.
6.
BaloghI.OhlssonK.HanssonG.-Å.EngströmT.SkerfvingS. (2006). Increasing the degree of automation in a production system: Consequences for the physical workload. International Journal of Industrial Ergonomics, 36(4), 353–365.
7.
Bruno GarzaJ. L.EijckelhofB. H.JohnsonP. W.RainaS. M.RynellP. W.HuysmansM. A.. . . BlatterB. M. (2012). Observed differences in upper extremity forces, muscle efforts, postures, velocities and accelerations across computer activities in a field study of office workers. Ergonomics, 55(6), 670–681.
8.
BystromJ. U.HanssonG. A.RylanderL.OhlssonK.KallrotG.SkerfvingS. (2002). Physical workload on neck and upper limb using two CAD applications. Applied Ergonomics, 33(1), 63–74.
9.
CaneiroJ. P.O’SullivanP.BurnettA.BarachA.O’NeilD.TveitO.OlafsdottirK. (2010). The influence of different sitting postures on head/neck posture and muscle activity. Manual Therapy, 15(1), 54–60.
10.
CarnazL.BatistaoM. V.CouryH. J. (2010). A review of direct neck measurement in occupational settings. Sensors (Basel), 10(12), 10967–10985.
11.
ChaffinD. B. (1973). Localized muscle fatigue—definiton and measurement. Journal of Occupational Medicine, 15(4), 346–354.
12.
ChangC. H.JohnsonP. W.DennerleinJ. T. (2008). A wide range of activity duration cutoffs provided unbiased estimates of exposure to computer use. Journal of Occupational and Environmental Hygiene, 5(12), 790–796.
13.
CoenenP.DouwesM.van den HeuvelS.BoschT. (2016). Towards exposure limits for working postures and musculoskeletal symptoms—a prospective cohort study. Ergonomics, 59(9), 1182–1192.
14.
DavidG. C. (2005). Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. Occupational Medicine (London), 55(3), 190–199.
15.
EdmondstonS. J.ChanH. Y.NgaiG. C.WarrenM. L.WilliamsJ. M.GlennonS.NettoK. (2007). Postural neck pain: An investigation of habitual sitting posture, perception of ‘good’ posture and cervicothoracic kinaesthesia. Manual Therapy, 12(4), 363–371.
16.
EdmondstonS. J.SharpM.SymesA.AlhabibN.AllisonG. T. (2011). Changes in mechanical load and extensor muscle activity in the cervico-thoracic spine induced by sitting posture modification. Ergonomics, 54(2), 179–186.
17.
FallaD.JullG.RussellT.VicenzinoB.HodgesP. (2007). Effect of neck exercise on sitting posture in patients with chronic neck pain. Physical Therapy, 87(4), 408–417.
18.
FleissJ. (1986). The design and analysis of clinical experiments. New York, NY: Wiley.
19.
GerrF.MarcusM.MonteilhC. (2004). Epidemiology of musculoskeletal disorders among computer users: Lesson learned from the role of posture and keyboard use. Journal of Electromyogaphy and Kinesiology, 14(1), 25–31.
20.
GerrF.MarcusM.OrtizD.WhiteB.JonesW.CohenS.. . . BauerE. (2000). Computer users’ postures and associations with workstation characteristics. AIHAJ—American Industrial Hygiene Association Journal, 61(2), 223–230.
21.
GoostreyS.TreleavenJ.JohnstonV. (2014). Evaluation of document location during computer use in terms of neck muscle activity and neck movement. Applied Ergonomics, 45(3), 767–772.
22.
HanssonG. A.ArvidssonI.OhlssonK.NordanderC.MathiassenS. E.SkerfvingS.. . . BaloghI. (2006). Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms. Journal of Electromyography and Kinesiology, 16(2), 125–136.
23.
HanssonG. A.AsterlandP.HolmerN. G.SkerfvingS. (2001). Validity and reliability of triaxial accelerometers for inclinometry in posture analysis. Medical and Biological Engineering and Computing, 39(4), 405–413.
24.
HarvillL. M. (1991). Standard error of measurement. Educational Measurement: Issues and Practice, 10(2), 33–41.
25.
HopkinsW. G. (2000). Measures of reliability in sports medicine and science. Sports Medicine, 30(1), 1–15.
26.
KeatingJ.MatyasT. (1998). Unreliable inferences from reliable measurements. Australian Journal of Physiotherapy, 44(1), 5–10.
27.
LivP.MathiassenS. E.SvendsenS. W. (2011). Theoretical and empirical efficiency of sampling strategies for estimating upper arm elevation. Annals of Occupational Hygiene, 55(4), 436–449.
28.
LivP.MathiassenS. E.SvendsenS. W. (2012). Accuracy and precision of variance components in occupational posture recordings: A simulation study of different data collection strategies. BMC Medical Research Methodology, 12, 58.
29.
LudbrookJ. (1997). Special article comparing methods of measurement. Clinical and Experimental Pharmacology and Physiology, 24(2), 193–203.
30.
LudbrookJ. (2002). Statistical techniques for comparing measurers and methods of measurement: A critical review. Clinical and Experimental Pharmacology and Physiology, 29(7), 527–536.
31.
LudbrookJ. (2010). Confidence in Altman-Bland plots: A critical review of the method of differences. Clinical and Experimental Pharmacology and Physiology, 37(2), 143–149.
32.
MarcusM.GerrF.MonteilhC.OrtizD. J.GentryE.CohenS.. . . KleinbaumD. (2002). A prospective study of computer users: II. Postural risk factors for musculoskeletal symptoms and disorders. American Journal of Industrial Medicine, 41(4), 236–249.
33.
MathiassenS. E.WahlstromJ.ForsmanM. (2012). Bias and imprecision in posture percentile variables estimated from short exposure samples. BMC Medical Research Methodology, 12, 36.
34.
MATLAB. (2015). MATLAB and Statistics Toolbox Release 2015b. Natick, MA: The MathWorks, Inc.
35.
McAtamneyL.Nigel CorlettE. (1993). RULA: A survey method for the investigation of work-related upper limb disorders. Applied Ergonomics, 24(2), 91–99.
36.
NejatiP.LotfianS.MoezyA.NejatiM. (2015). The study of correlation between forward head posture and neck pain in Iranian office workers. International Journal of Occupational Medicine and Environmental Health, 28(2), 295–303.
37.
NordanderC.HanssonG. A.OhlssonK.ArvidssonI.BaloghI.StrombergU.. . . SkerfvingS. (2016). Exposure-response relationships for work-related neck and shoulder musculoskeletal disorders: Analyses of pooled uniform data sets. Applied Ergonomics, 55, 70–84.
38.
NordanderC.OhlssonK.AkessonI.ArvidssonI.BaloghI.HanssonG. A.. . . SkerfvingS. (2013). Exposure-response relationships in work-related musculoskeletal disorders in elbows and hands: A synthesis of group-level data on exposure and response obtained using uniform methods of data collection. Applied Ergonomics, 44(2), 241–253.
39.
NunnallyJ. C.Bernstein.I. H. (1994). Psychometric Theory. New York, NY: McGraw-Hill.
40.
OrtizD. J.MarcusM.GerrF.JonesW.CohenS. (1997). Measurement variability in upper extremity posture among VDT users. Applied Ergonomics, 28(2), 139–143.
41.
PearcyM. J.HindleR. J. (1989). New method for the non-invasive three-dimensional measurement of human back movement. Clinical Biomechanics, 4(2), 73–79.
42.
PletinckxD. (1989). Quaternion calculus as a basic tool in computer graphics. The Visual Computer, 5(1), 2–13.
43.
ShiratsuA.CouryH. J. (2003). Reliability and accuracy of different sensors of a flexible electrogoniometer. Clinical Biomechanics, 18(7), 682–684.
44.
StenlundT. C.ÖhbergF.LundströmR.LindroosO.HägerC.RehnB. (2014). Inter- and intra-tester reliability when measuring seated spinal postures with inertial sensors. International Journal of Industrial Ergonomics, 44(5), 732–738.
45.
StrakerL.MekhoraK. (2000). An evaluation of visual display unit placement by electromyography, posture, discomfort and preference. International Journal of Industrial Ergonomics, 26(3), 389–398.
46.
StratfordP. (1989). Reliability: Consistency or differentiating among subjects?Physical Therapy, 69(4), 299–300.
47.
SzetoG. P.StrakerL.RaineS. (2002). A field comparison of neck and shoulder postures in symptomatic and asymptomatic office workers. Applied Ergonomics, 33(1), 75–84.
48.
TeschkeK.TraskC.JohnsonP.ChowY.VillageJ.KoehoornM. (2009). Measuring posture for epidemiology: Comparing inclinometry, observations and self-reports. Ergonomics, 52(9), 1067–1078.
49.
WeirJ. P. (2005). Quantifying test-retest reliability using the intraclass correlation coefficient and the SEM. The Journal of Strength and Conditioning Research, 19(1), 231–240.
